RL-D3A-CNU1
1. Support for all 3.5" hard disk drives.
2. Can be used for all kinds of Φ6.5mm pipe Liquid Cooling System.
3. Easy mount of the HDD Water Block on the hard disk drive.
4. Easy assembly of tubes on the HDD Water Block.
5. A machined finish ensures perfect contact with hard disk drive, and provides the
maximum stability.
6. Copper base achieves excellent heat dissipation.
7. Provide best system stability and silent environment.
Cooler Master launch a series of cooling
accessory included several kinds of water
blocks, radiators, water pipes, coolants...
One of water blocks is AquaTurtle, HDD Water
Block, with copper base achieves excellent heat
dissipation. Supporting for all 3.5" hard disk drives
and providing best system stability and silent
environment for your DIY cooling system.
Copper
Applications
Weight
Outer Pipe Diameter
Connector Outside Dimension
Connector Inside Dimension
Block Dimension
Connector Material
Base Material
Model
Cover Material
PC (with cover)
146x146x40 mm
Φ4mm
Φ7mm
Φ10mm
RL-CUC-CNU1
PC141R
Inner Pipe Diameter
600 g
Φ6.5mm
All 3.5” HDD
Introduction
Features
Specifications
High Performance
High Performance
Ultra Silence
Ultra Silence
HDD Water Block
AquaTurtle
HDD Water Block
AquaTurtle
HDD Water Block
AquaTurtle
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Star Micronics SP349 Install Manual
-
Rosewill RCW-H9011 Datasheet
-
Rosewill RCW-H9013 Datasheet
-
-
-
Seagate ST4000NM007A Exos 7E8 4 TB 512n SAS SED User manual
-
Seagate ST6000NM0074 User manual
-
-
-