Con-Tact 12F-C6C59-12 Operating instructions

Grip Premium

The Con-Tact Grip Premium non-adhesive shelf and drawer liner

protects drawer and shelf surfaces from every day wear and tear.

Instructions for Use

1) Prepare Surface

• Apply only to clean, smooth

surface. To clean, use soap &

water. Rinse & dry thoroughly.

• Products may not adhere to fabric,

rough or pebbly surfaces or

surfaces under 55˚F (13˚ C).

2) Measure & Cut

• Allow at least 3/8” (1cm) overlap

on all edges for possible shrinkage.

3) Apply

• Beginning at the center, press out

towards edge using squeegee,

straight edge tool or cloth.

• Covering may be lifted and

repositioned during application to

eliminate bubbles or wrinkles.

• Avoid pulling or stretching.

This manual is also suitable for

Download PDF