Traceable 4126 Owner's manual

Brand: Traceable

Model: 4126

Category: Environment thermometers

Type: Owner's manual

Traceable 4126 is a versatile thermometer with a range of features that make it ideal for a variety of applications. It can measure temperatures from -58.0 to 158.0 °F (-50.0 to 70.0 °C) with an accuracy of ±1°. The large 1⅛ inch (2.86 cm) LCD display makes it easy to read, even from a distance. The external probe can be used to monitor temperatures in air/gas, liquids, and semi-solids, and both the probe and cable may be totally immersed in water. The thermometer also has a memory function that allows you to recall the minimum and maximum temperatures.

Here are some possible use cases for the Traceable 4126:

SPECIFICATIONS

Display: 1⅛inch(2.86cm)LCD

Range— Ambient: 23.0to122.0°F(–5.0to50.0°C)

 Probe: –58.0to158.0°F(–50.0to70.0°C)

Resolution: 0.1°

Accuracy: ±1°

SamplingTime: 10seconds

Power: 1AAAAlkalineBattery

Case: ABSPlastic

Size: 2¾x4¼x⅝inches

Accessories: sensorbracket,Velcro™,stand,

 battery,Traceable

Certicate,

 instructions.

FIGURE 1: DESCRIPTION

1.AmbientDisplay

2.ProbeDisplay

3.Maximum(MAX)

TemperatureButton

4.Minimum(MIN)

TemperatureButton

5.RESETButton

6.Probe

NOT SHOWN

°C/°FSwitchonback

ofunit

OPERATION

1. Turnthethermometeronbyinsertingthebattery.To

insertthebattery,slidetheBatterydoorlocatedonthe

backinthedirectionofthearrow.Insertthebatteryas

directedbythepolaritysymbols(+and-).Replacethe

BatteryDoor.

2. Theexternalprobemaybeusedtomonitortempera-

turesinair/gas,liquids,andsemi-solids.Boththe

probeandcablemaybetotallyimmersedinwater.

3. SelectFahrenheit(°F)orCelsius(°C)byslidingthe

switchonthebackoftheunittothedesiredsetting.

4. PresstheRESETbutton.Allsegmentswillbe

displayedfor3secondsthentheunitwilldisplaythe

current°For°Ctemperature.

MEMORY

1. PresstheMINorMAXbuttononcetorecallboththe

ambientandprobeminimum/maximumtemperature.

“MIN”or“MAX”willappearonthedisplay.

2. PresstheMINorMAXbuttononceagaintoreturnto

thecurrenttemperaturedisplay.“MIN”or“MAX”will

nolongerappearonthedisplay.

3. With“MIN”or“MAX”onthedisplay,presstheRESET

buttontoreseteithertheminimumandmaximum

temperatures.Allsegmentswillbedisplayedfor3

secondsandtheminimumormaximumtemperatures

willbesettothecurrenttemperature.

DISPLAY MESSAGES

HHH(Flashing)—Indicatesthatthetemperaturebeing

measuredisabovetherangeofthe

unit.

LLL(Flashing)— Indicatesthatthetemperaturebeing

measuredisbelowtherangeofthe

unit.

MOUNTING

Awireholderisprovidedwiththeexternalprobefor

permanentmounting.Tomounttheprobe,placeascrew

ornailthroughtheholeofthewireholderandsecurethe

holdertothewall.Theunitisprovidedwithareceptacle

forwallmounting.Setascrewintothewallatthelocation

desired.Theheadofthescrewwillneedtoslipintothe

receptacleonthebackoftheunit.Donotsetthescrew

ushtothewall.Oncethescrewhasbeensetproperly,

hangtheunitinplacebyslidingthereceptacleonthe

backoftheunitovertheheadofthescrew.Theunitmay

alsobemountedbyusingtheVelcro

™

supplied.

BENCH STAND

Theunitissuppliedwithabenchstandthatisapart

ofthecase.Tousethebenchstand,locatethesmall

rectangularopeningoneithersideofthebatterycover.

Placeyourngernailintotheopeningandipthestand

up.Toclosethestand,simplesnapitshut.

BATTERY REPLACEMENT

Erraticreadings,afaintdisplay,ornodisplayareall

indicatorsthatthebatteryislowandmustbereplaced.

Toreplacethebattery,slideBatteryDoorlocatedonthe

backinthedirectionofthearrow.Insertanew1.5VAAA

alkalinebattery,NOTaregularorheavydutybattery,

asdirectedbythepolaritysymbols(+and-).Incorrectly

installedbatteriesmaydamageelectronics.Replacethe

BatteryDoor.

ALL OPERATIONAL DIFFICULTIES

Ifthisthermometerdoesnotfunctionproperlyforany

reason,pleasereplacethebatterywithanewhigh

qualitybattery(see“BatteryReplacement”section).Low

batterypowercanoccasionallycauseanynumberof“ap-

parent”operationaldifculties.Replacingthebatterywith

anewfreshbatterywillsolvemostdifculties.

WARRANTY, SERVICE, OR RECALIBRATION

Forwarranty,service,orrecalibration,contact:

CONTROL COMPANY

12554 Old Galveston Rd. Suite B230

Webster, Texas 77598 USA

Ph. 281 482-1714 • Fax 281 482-9448

E-mail [email protected]

www.traceable.com

Control Company is ISO 9001:2008 Quality-Certied

by DNV and ISO/IEC 17025:2005 accredited as a

Calibration Laboratory by A2LA.

TRACEABLE

BIG-DIGIT

MEMORY

THERMOMETER

INSTRUCTIONS

Traceable

is a registered trademark of Control Company.

Traceable 4126 Owner's manual

Brand: Traceable

Model: 4126

Category: Environment thermometers

Type: Owner's manual

Here are some possible use cases for the Traceable 4126:

Download PDF

report

Traceable 4126 Owner's manual

Traceable 4126 Owner's manual

Related papers

Other documents