Whalen HST3IN1C User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Whalen Furniture Mfg., Inc. Page 1 Factory # 33-10944

Hastings 3-in-1 Gaming Theater

TM

Console

Model # HST3IN1C

U.S. Patents 8,079,311 & 8,191,485 and other Patent Pending

This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your

needs. DO NOT discard any of the hardware or parts that you will not use on your set option. This will

give you the opportunity to use this TV Stand for different configurations in case you decide to

upgrade your TV set in the future.

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our toll-free customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362 8:30 a.m. - 4:30 p.m., PST, Monday - Friday

ONLINE: www.whalenstyle.com EMAIL: parts@whalenfurniture.com

On-line Video Instruction Guides

Go to http://whalen.showuhow.com to view step-by-step instructional

videos for assembling and installing your product. Enter the following

product number on the ShowUhow homepage.

LOT NUMBER:

DATE PURCHASED: / /

HST3IN1C

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 2 Factory # 33-10944

MANUFACTURER: Whalen Furniture

CATALOG: Hastings 3-in-1 Gaming Theater

TM

Console (HST3IN1C)

DATE OF MANUFACTURE: July 2012

MADE IN CHINA

1. Please read the Assembly Instructions prior to assembling this product.

2. Remove all hardware from box and sort by size.

3. Check to see that all hardware and parts are present BEFORE assembling.

4. Ask a friend to assist you with the assembly of this furniture.

5. To avoid damage, assemble the product on a sturdy, level and protective surface.

6. Please wait until all steps are completed before tightening bolts.

7. Make sure all bolts are tightly fastened before the unit is used.

MAXIMUM RECOMMENDED WEIGHT LOADS

GENERAL INFORMATION

,

TIPS and TRICKS

FITS UP TO MOST 60” FLAT PANEL TVs

MAXIMUM LOAD 135 lb. (61.2 kg)

FITS UP TO MOST 60” FLAT PANEL TVs

WITHOUT SWIVELING BRACKET

MAXIMUM LOAD 135 lb. (61.2 kg)

MAXIMUM LOAD 50 lb. (22.7 kg)

THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH

FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND

WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT

PANEL TVS OR EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN CENTRE

OF UNIT; CRT TVS, IMPROPERLY POSITIONED FLAT PANEL TVS, OR FLAT PANEL TVS OR

OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND WEIGHT LIMITS COULD

FALL OFF OR BREAK THE UNIT, CAUSING POSSIBLE SERIOUS INJURY.

MAXIMUM LOAD 15 lb. (6.8 kg)

PLACE TV BEHIND THE STOPPER

This product is sold with a Tipping Restraint Hardware Kit. You must install the Tipping

Restraint Hardware between the wall and the TV stand to prevent any accidents or

damages. When properly installed, this restraint can provide protection against the

unexpected tipping of the unit due to small tremors, bumps or climbing. The restraint is only

a deterrent and is not a substitute for proper adult supervision. Use of tip-over restraints may

o

nl

y

r

educe,

but

n

ot

e

limin

ate,

t

h

e

ri

s

k

o

f

t

i

p

-

o

v

e

r.

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 3 Factory # 33-10944

Parts and Hardware List

Please read completely through the instructions and verify that all parts listed are present

before beginning assembly.

A- TOP SHELF FRAME (1) B- MIDDLE PANEL w/METAL FRAME (1) C- BOTTOM METAL FRAME (1)

D- FLOATER POST (1) E- BACK FRAME (1) F- LEFT BACK LEG (1)

G- LEFT FRONT LEG (1) H- LEFT SIDE PANEL (1) I- RIGHT BACK LEG (1)

J- RIGHT FRONT LEG (1) K- RIGHT SIDE PANEL (1) L- SIDE STRETCHER (2)

M- DRAWER DIVIDER (2) N- DRAWER (1) O- TOP GLASS (1)

P- SWIVELING BRACKET (1) Q- XYZ MOUNTING FRAME (1) R- MONITOR BRACKET (2)

S- SSS SPINE T- SENSOR/SOUND SHELF U- GAMING GUITAR CLIP V- CABLE WHEEL

(1) (1) (1) (2)

(1) SUCTION CUP (2) 1/2” BOLT (3) 3/4” BOLT (4) 1-1/2” BOLT

(8+1 extra) (8+1 extra) (17+1 extra) (4+1 extra)

RR

RL

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 4 Factory # 33-10944

Parts and Hardware List

Please read completely through the instructions and verify that all parts listed are present

before beginning assembly.

(5) 2-1/4” BOLT (6) HEX NUT (7) LOCK WASHER (8) FLAT WASHER

(10+1 extra) (4+1 extra) (38+1 extra) (38+1 extra)

(9) CAM LOCK (10) CAM BOLT (11) CONCRETE ANCHOR (12) 2-1/2” LAG BOLT

(8+1 extra) (8+1 extra) (4) (4)

(13) LARGE FLAT WASHER (14) ACRYLIC STOPPER (15) HANDLE w/BOLTS OPEN WRENCH

(4+1 extra) (1) (1) (1)

M4 ALLEN WRENCH 3/16” ALLEN WRENCH TOUCH-UP PEN TIPPING RESTRAINT HARDWARE KIT (1)

(2) (1) (1) (Inside Plastic Bag)

TV Mounting Kit

M4 x 12 BOLT (4) M4 x 30 BOLT (4) M5 x 12 BOLT (4) M5 x 30 BOLT (4)

M6 x 12 BOLT (4) M6 x 35 BOLT (4) M8 x 16 BOLT (4) M8 x 40 BOLT (4)

M4 LOCK WASHER (4) M5 LOCK WASHER (4) M6 LOCK WASHER (4) M8 LOCK WASHER (4)

LARGE SPACER (4) SMALL SPACER (4) M4/M5 FLAT WASHER (8) M6/M8 FLAT WASHER (4)

Tools required: Allen Wrench (provided), Open Wrench (provided) and Phillips Screwdriver (not provided).

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 5 Factory # 33-10944

H

L

G

H/K

F/G

I/J

F/G

I/J

L

Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts listed.

2. Pick up LEFT BACK and FRONT LEG (F and G) and screw four CAM BOLTS (10) all the way

into the threaded inserts as shown.

3. Using the end dowels as a guide, attach LEFT SIDE PANEL (H) and SIDE STRETCHER (L)

between the LEFT BACK and FRONT LEG (F and G). Insert four CAM LOCKS (9) into the

large holes on the LEFT SIDE PANEL (H). Make sure that all the arrows on the face of CAM

LOCKS are facing out and pointing towards the entry of CAM BOLTS (10). Securely tighten

the CAM LOCKS with a PHILLIPS SCREWDRIVER until locked onto CAM BOLTS.

4. Repeat the process to combine RIGHT BACK and FRONT LEG (I and J) and RIGHT SIDE

PANEL and SIDE STRETCHER (K and L) together.

CAM LOCK

(8 used in this step)

⑨

CAM BOLT

(8 used in this step)

⑩

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 6 Factory # 33-10944

Assembly Instructions

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,

go back and fully tighten all bolts. This will make it easier during assembly of unit.

5. Locate BACK FRAME (E) on a level and protective surface with the flush surfaces facing up.

6. Fasten TOP SHELF FRAME (A) to the top of BACK FRAME (E) using two 2-1/4” BOLTS (5)

with WASHERS (7 and 8). Make sure the end metal brackets will face bottom.

7. Align and attach LOWER METAL FRAMES (B & C) to the BACK FRAME (E) with the end metal

brackets facing each other. Secure in place using four 1-1/2” BOLTS (4) with WASHERS (7 & 8).

LOCK WASHER

(6 used in this step)

⑦

FLAT WASHER

(6 used in this step)

⑧

UP

B

E

1-1/2” BOLT

(4 used in this step)

④

2-1/4” BOLT

(2 used in this step)

⑤

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 7 Factory # 33-10944

Assembly Instructions

8. Stand last assemblies upright.

9. Align and attach assembled side frames to the three METAL FRAMES (A, B and C) using six

3/4” BOLTS (3) with WASHERS (7 and 8) through the metal brackets.

LOCK WASHER

(12 used in this step)

⑦

FLAT WASHER

(12 used in this step)

⑧

3

8

7

K

I

J

H

G

F

F/I

G/J

3/4” BOLT

(12 used in this

step)

③

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 8 Factory # 33-10944

Assembly Instructions

10. Remove the bolts in the HANDLE (15), then use the bolts to attach the HANDLE to the front

panel of DRAWER (N).

11. To convert the DRAWER (N) into three portions, slide two DRAWER DIVIDERS (M) into the

slots of the DRAWER.

M

N

15

N

M

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 9 Factory # 33-10944

N

Assembly Instructions

12. To insert the DRAWER (N) into your unit, extend the slide tracks on the SIDE PANELS (H

and K) all the way forward (including ball bearing cart). Then align the slide runners on the

DRAWER with the sliding tracks and push the DRAWER carefully inside until it stops.

NOTE

: If they do not go smoothly, please take out and repeat the step. If you need to remove

the DRAWER, please pull the DRAWER all the way out, then simultaneously push the

PLASTIC RELEASE LEVER of the ball bearing slides up on one side and down on the other

side, and then pull it completely out.

If you choose Table-top configuration,

continue to next step.

If mounting TV with the Floating Swivel

Mount, skip ahead to PAGE 14.

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 10 Factory # 33-10944

3

V

E

V

Assembly Instructions

13. Attach GAMING GUITAR CLIP (U) and CABLE WHEELS (V) onto the backside of BACK

FRAME (E) using five 3/4” BOLTS (3).

NOTE:

You can use the CABLE WHEELS to help keep your entertainment center’s cables

and cords organized. The GAMING GUITAR CLIP (U) can provide storage of gaming guitar

controllers.

3/4” BOLT

(5 used in this step)

③

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 11 Factory # 33-10944

O

G/J

Assembly Instructions for Table-top

14. Put SUCTION CUPS (1) firmly into the top holes of TOP SHELF FRAME (A) as shown above.

TIP: If a SUCTION CUP resists insertion, try pressing down on the middle of the cup with the

Allen Wrench while twisting it clockwise into the hole.

15. Place TOP GLASS (O) with the black side of glass down onto the SUCTION CUPS (1). Make

sure the glass is centered properly and back edges are flush with each other.

NOTE: If glass is scratched you can minimize the damage by using a BLACK marker and filling

in scratched area from underneath.

16. Adjust the FLOOR LEVELERS pre-attached at the bottom of LEGS (G and J) to level the unit.

SUCTION CUP

(8 used in this step)

①

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 12 Factory # 33-10944

Assembly Instructions

NOTE

: You must install the Acrylic TV Stopper to prevent TV from tipping when placing your flat

panel television directly on the table-top console.

17. Remove the tape of ACRYLIC STOPPER (14) and place it in the cut-out of the warning label

on the front of TOP GLASS (O). Make sure it is aligned before applying pressure.

18. Remove the warning label for the ACRYLIC STOPPER carefully.

ACRYLIC STOPPER

(1 used in this step)

⑭

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 13 Factory # 33-10944

Assembly Instructions for Table-top

Tools required

: Allen Wrench (provided), Phillips Screwdriver, Mallet, Power Drill, and 3/8” Drill Bit.

19. Position the assembled console in your desired location against a wall. Now follow the

instructions printed on the plastic bag containing the TIPPING RESTRAINT HARDWARE to

mount the tipping restraint to the BACK FRAME and the wall.

NOTE

: YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO THE

WALL, TO PREVENT ACCIDENTS AND/OR INJURIES.

20. The console is ready for use now. Be sure to position your Flat Panel TV in center of the

console, behind the ACRYLIC STOPPER.

NOTE

: For Tilting Wall Mount, proceed to PAGE 24.

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 14 Factory # 33-10944

21. Align and attach the FLOATER POST (D) to the back of BACK FRAME (E). Tighten the bolts

with M4 Allen Wrench provided.

Assembly Instructions for

Floating Swivel Mount

E

D

UP

LOCK WASHER

(4 used in this step)

⑦

FLAT WASHER

(4 used in this step)

⑧

2-1/4” BOLT

(4 used in this step)

⑤

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 15 Factory # 33-10944

D

Assembly Instructions

22. Align and attach the SWIVELING BRACKET (P) to the top of FLOATER POST (D) with the

pivoting bolt head up. Securely tighten with Open Wrench and M4 Allen Wrench provided.

NOTE: The FLOATER POST can provide four height options for your TV set. Refer to your TV

size, adjust the SWIVELING BRACKET at your desired height to offer optimum viewing.

LOCK WASHER

(8 used in this step)

⑦

FLAT WASHER

(8 used in this step)

⑧

2-1/4” BOLT

(4 used in this step)

⑤

HEX NUT

(4 used in this step)

⑥

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 16 Factory # 33-10944

Assembly Instructions

NOTE

: The adjustable SENSOR/SOUND SHELF (T) can be installed above or below TV for

easy set up of gaming or surround sound systems.

23. Choose the option you prefer, slide SSS SPINE (S) onto the XYZ MOUNTING FRAME (Q)

properly. Adjust the height of SSS SPINE and attach in place using four 1/2” BOLTS (2) and

WASHERS (7 and 8). Make sure the SENSOR/SOUND SHELF (T) will not hit your TV.

LOCK WASHER

(4 used in this step)

⑦

FLAT WASHER

(4 used in this step)

⑧

1/2” BOLT

(4 used in this step)

②

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 17 Factory # 33-10944

Q

S

P

Q

S

P

D

Assembly Instructions

24. Hold and attach the flat side of XYZ MOUNTING FRAME (Q) onto the SWIVELING BRACKET

(P) using four 1/2” BOLTS (2) and WASHERS (7 and 8). Make sure the recess holes on the

XYZ MOUNTING FRAME are at the bottom.

LOCK WASHER

(4 used in this step)

⑦

FLAT WASHER

(4 used in this step)

⑧

1/2” BOLT

(4 used in this step)

②

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 18 Factory # 33-10944

Assembly Instructions

25. Pick up SENSOR/SOUND SHELF (T) and securely fit the back tabs into the small slots of SSS

SPINE (S). Tighten both LOCK BOLTS pre-attached on the SSS SPINE with a PHILLIPS

SCREWDRIVER until they hit the back tabs of SENSOR/SOUND SHELF.

S

T

D

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 19 Factory # 33-10944

Mounting Monitor Brackets to a Television with a Flat Back

NOTE

: For televisions with a curved back or recessed back proceed directly to next page.

26. Determine the correct diameter of the bolt your TV requires by hand threading them into the

threaded insert on the back of the TV. If you encounter any resistance, stop immediately. If

you are unable to find the correct bolt consult a local hardware store.

27. Follow the appropriate diagram above to attach MONITOR BRACKETS (RL/RR) to the back

of your TV with selected fasteners. Make sure the MONITOR BRACKETS are centered and

level with each other. Secure the bolts with a PHILLIPS SCREWDRIVER. DO NOT over

tighten the bolts.

NOTE: Lean the TV up against a wall or other solid surface when attaching with the Monitor

Brackets. DO NOT place the TV face down on the glass this may cause permanent damage.

Model # HST3IN1C

Whalen Furniture Mfg., Inc. Page 20 Factory # 33-10944

Mounting Monitor Brackets to a Television with a Curved/Recess Back

28. Determine the correct diameter of the bolt your TV requires by hand threading them into the

threaded insert on the back of the TV. If you encounter any resistance, stop immediately. If

you are unable to find the correct bolt consult a local hardware store.

29. Follow the appropriate diagram above to attach MONITOR BRACKETS (RL/RR) to the back

of your TV with selected fasteners. Make sure the MONITOR BRACKETS are vertically

centered and level with each other. Secure the bolts with a PHILLIPS SCREWDRIVER. DO

NOT over tighten the bolts.

Page is loading ...

Whalen HST3IN1C User manual

Whalen HST3IN1C User manual

Related papers