EN
User´s Manual
Ref. 563901
Power Supply Unit
www.televes.com
P.S.U. 563901
2
3
Important safety instructions
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a damp cloth.
• Do not block any of the ventilation openings. Install in accordance with the
manufacturers instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus(including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particulary at plugs,
convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of
time.
• Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Warning
• Reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
• Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
Safe operation
• Power requirements for this product are 108 - 132V~ 50/60 Hz.
• Should any liquid or object fall into the equipment, please refer to qualified
personnel for service.
• To disconnect the equipment from the mains pull the plug never the cable.
• It is strongly recommended not to connect the equipment to the mains until all
connections have been done.
• The socket outlet shall be installed near the equipment and shall be easily
accessible.
Safe installation
• Ambient temperature should not be higher than 113°F.
• Do not place the equipment near heat sources or in a highly humid environment.
• Do not place the equipment in a place where it can suffer vibrations or shocks.
DESCRIPTION OF THE ELECTRICAL SAFETY
SYMBOLS
To reduce the risk of Fire or Electric Shock, do not expose this
appliance to rain or moisture.
This symbol indicates “dangerous voltage” inside the product that
presents a risk of electric shock or personal injury.
This symbol indicates important instructions accompanying the
product.
This symbol indicates full compliance with the FCC Standards.
This symbol indicates a UL Recognized porduct for USA and
Canada.
P.S.U. 563901
4
24V: OK
0V: Overload or short circuit
Connectors to power modules (24V
)
24V
24V
24V
0V
0V
24V
LEDS
4A max.
5A max.
Mains
108 - 132V~ 50/60Hz
Star washer
M4 nut
M4x10
Earthing
connection
5
Rack mount
Rack
Ref. 5301
Technical speci cations
563901
Mains voltage V~ 108 - 132
Mains frequency Hz 50 / 60
Max. input current A~ 1,5
Output voltage V
24 ±1
(1)
Max. output current A 5
(2)
Max. output power W 120
Maximum working temp. ºF 113
Protection Level IP 20
(1)
Provides protection voltage variation from 21 to 27V.
(2)
Maximum current per output limited to 4A.
P.S.U. 563901
6
Rack Mount Instructions
A) Elevated Operating Ambient - If installed in a
closed or multi-unit rack assembly, the operating
ambient temperature of the rack environment may
be greater than room ambient. Therefore,
consideration should be given to installing the
equipment in an environment compatible with the
maximum ambient temperature (Tma) specified by
the manufacturer.
B) Reduced Air Flow - Installation of the equipment
in a rack should be such that the amount of air flow
required for safe operation of the equipment is not
compromised.
C) Mechanical Loading - Mounting of the equipment
in the rack should be such that a hazardous
condition is not achieved due to uneven
mechanical loading.
D) Circuit Overloading - Consideration should be
given to the connection of the equipment to the
supply circuit and the effect that overloading of the
circuits might have on overcurrent protection and
supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when
addressing this concern.
E) Reliable Earthing - Reliable earthing of rack-
mounted equipment should be maintained.
Particular attention should be given to supply
connections other than direct connections to the
branch circuit (e.g. use of power strips).
7
Guarantee
Televés S.A. o ers a two year guarantee, beginning from the date of
purchase for countries in the EU. For countries that are not part of
the EU, the legal guarantee that is in force at the time of purchase is
applied. Keep the purchase invoice to determine this date.
During the guarantee period, Televés S.A. complies with the guarantee
by repairing or substituting the faulty equipment.
The harm produced by improper usage, wear and tear, manipulation
by a third party, catastrophes or any other cause beyond the control
of Televés S.A. is not included in the guarantee.
televes.com
/