FLIR DNR300 Series User guide

FLIR
Brand
FLIR
Model
DNR300 Series
Category
Security cameras
Type
User guide

FLIR DNR300 Series is a powerful network video recorder that offers reliable surveillance with exceptional video quality. It supports up to 16 IP cameras, allowing you to monitor your property from anywhere with remote access. With PoE (Power over Ethernet) capability, you can power your cameras directly from the NVR, simplifying installation and reducing cable clutter. Advanced features like motion detection, event recording, and playback provide enhanced security and make it easy to review footage when needed.

FLIR DNR300 Series is a powerful network video recorder that offers reliable surveillance with exceptional video quality. It supports up to 16 IP cameras, allowing you to monitor your property from anywhere with remote access. With PoE (Power over Ethernet) capability, you can power your cameras directly from the NVR, simplifying installation and reducing cable clutter. Advanced features like motion detection, event recording, and playback provide enhanced security and make it easy to review footage when needed.

DNR300 Series Quick Connection Guide - English - R2
Information in this document is subject to change
without notice. As our products are subject to continuous
improvement, FLIR Systems, Inc. and our subsidiaries reserve
the right to modify product design, specifications and
prices, without notice and without incurring any obligation.
E&OE © 2014 FLIR Systems, Inc. All rights reserved.
PACKAGE CONTENTS:
CD
(includes software & manual)
Remote control
Network Video Recorder (NVR)
Quick Start Guides
Power adapter (x2)
Ethernet cable
USB mouse
Connecting your system
*Not included/sold separately.
**See reverse to add cameras from your LAN; 8-port PoE switch
accessory sold separately (model: ACCDPS281).
31
5
IP Cameras*
Monitor/TV*
Router*
Mouse
4
HDMI*
Ethernet Extension Cable*
VGA*
OR
Network Video Surveillance Recorder
DNR300 Series
Quick Connection Guide
NOTE: It may take up to
1 minute for cameras to start up
and transmit video to your NVR.
Power
2
(to PoE Ports)
Connect cameras
1~8 to NVR
Power
(to NVR)
6
7: ON
Connect cameras to a Router* or
Switch* on your LAN. If your NVR has
more than 8 channels, this is required
to connect channels 9 and higher**
OR
www.flirsecurity.com/pro
For support, visit
Latest software and manuals available on
www.flirsecurity.com/pro
DNR300 Series Quick Connection Guide - English - R2
1. Left-Button:
• Click to open the Navigation Bar.
• During split-screen display mode: Double-click an
individual channel to view it in full-screen. Double-click
again to return to the split-screen display mode.
• While navigating menus: Click to open a menu option.
2. Right-Button:
• During Live View: Right-click anywhere on the screen to
open the Quick Menu.
• Within system menus: Right-click to exit menus.
3. Scroll-Wheel:
• Use to change menu options.
Using the Mouse Setting the Date & Time Searching & Playing Back Video
1 2
3
Network Video Surveillance Recorder
DNR300 Series
Quick Connection Guide
Adding Cameras from the LAN
1. Connect the camera to a router or switch on
the same network as the NVR.
2. Right-click and select Device Search. Log
in using the admin account (Default User Name:
admin; Default Password: 000000).
3. Click IP Search.
1. In the main viewing mode, right-click and click
Main Menu. If needed, log into the system using the
admin account (Default User Name: admin; Default
Password: 000000).
2. Click Setting > General.
3. Enter the current date (MM DD YYYY) and time
(HH MM SS) under System Time. Set the date and
time. Click Save.
4. Click OK.
Set the date
and time
Click Save
1. From live view, right-click and then click Search. If needed, log
in using the admin account (Default User Name: admin; Default
Password: 000000).
2. Use the calendar on the right to select the day to playback.
3. Use the drop-down menus to select the channels you would like
to playback. Click the display options ( ) to
playback multiple channels simultaneously.
4. Click inside the video bar to select the playback time.
Select the day
to playback.
Select channels
to playback.
Click inside the bar to
select a playback time.
4. Check the camera(s) you would like to add
and click Add.
5. If the Status indicator is green, the camera
is connected and no further configuration is
required. Click OK to save changes.
6. If the Status indicator is red, click .
Update the following information, as needed.
Password: Enter the camera’s password.
User: Enter the camera’s user name.
Manufacturer: Select the manufacturer of
your IP camera.
HTTP Port: Enter the camera’s HTTP Port.
RTSP Port: Enter the camera’s RTSP Port.
7. Click OK. Click OK again to save changes.
NOTE: See the included manual on CD for details on
configuring Daylight Savings Time and Network Time Protocol.
NOTE: See the manual for your IP camera for details on
the default username, password, or ports used.
NOTE: Please visit www.flirsecurity.com/pro for a list of compatible IP cameras.
  • Page 1 1
  • Page 2 2

FLIR DNR300 Series User guide

FLIR
Brand
FLIR
Model
DNR300 Series
Category
Security cameras
Type
User guide

FLIR DNR300 Series is a powerful network video recorder that offers reliable surveillance with exceptional video quality. It supports up to 16 IP cameras, allowing you to monitor your property from anywhere with remote access. With PoE (Power over Ethernet) capability, you can power your cameras directly from the NVR, simplifying installation and reducing cable clutter. Advanced features like motion detection, event recording, and playback provide enhanced security and make it easy to review footage when needed.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents