Genelec 8000-437B VESA adapter 75/100 mm Operating instructions
- Category
- Flat panel accessories
- Type
- Operating instructions
VESA ADAPTOR-PLATE 8000-437B for GENELEC 8000 Series
Instruction Manual
1. Fix adaptor plate onto GENELEC monitor by tightening two allen screws
1. M6 x 14 mm and washers
2. Fix adaptor plate on a qualified wall/ceiling/stand-bracket
3. by tightening four recessed head screws M4x12 and washers
Safety Instructions
- Max.load capacity: 15 kg.
- Use four screws for fixing on a bracket.
- Do NOT use Vesa-Adaptor for direct wall fastening;
- ONLY in combination with a qualified wall/ceiling/stand-bracket.
- Inspect bolted assemblies periodly
- For indoor use only
1.a
Use horizontal hole
pattern for:
- vertical mounting
- (8020A, 8030A)
- horizontal mounting
- (8040A, 8050A)
1.b
Alternative use vertical
hole pattern for:
- vertical mounting
- (8040A, 8050A)
For example:
bracket with hole pattern
- VESA MIS-D 75/100
max. load 15 kg,
VESA MIS-D 75/100
GENELEC Oy
Olvitie 5, Fin-74100 Iisalmi, www.genelec.com
24483-000-55 Rev.01 03-80-342-00 4/09
Dimensions (mm)
-
1
Genelec 8000-437B VESA adapter 75/100 mm Operating instructions
- Category
- Flat panel accessories
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Genelec 8050A User manual
-
Genelec 8040A Studio Monitor Operating instructions
-
-
-
-
-
-
-
-