Standard Features
Heated holding for up to 5 half-size
sheet pans sideways in a shallow
footprint for smaller kitchens.
Durable, stainless steel
construction, interior and exterior.
Electro-mechanical controls feature
thermostat temperature control, dial
thermometer, ON/OFF and cycle
temperature lights.
Two clear acrylic flip-up panels in
front door for visibility and specific
product access.
Energy-efficient dual pane window
glass in rear door (pass-through
units.)
Heavy-duty blower motor.
Ventilated side racks.
Removable air ducts for easy
cleaning.
Full perimeter door gasket.
Fully insulated sidewalls and
control module.
Self-closing, lift-off doors stay open
past 90 degrees of arc.
Partial pan removal for convenient
loading and unloading.
Magnetic door latch and heavy-duty
plated hinges.
Stainless steel water pan, standard.
MODEL HCN-5 hal
f
-size
Please specify desired configuration
Door hinge
Right OR Left
Style
Pass-through OR Solid back
© 2009 Henny Penny Corporation, Eaton, OH 45320 USA Revised 07/12/10
Heated holding cabinet
PROJECT QUANTITY ITEM NO
General Information
Henny Penny heated holding
cabinets are designed to hold a wide
range of cooked foods at safe
temperatures for long periods of time
prior to serving.
The HCN-5 is a half-size heated
holding cabinet produced in China
and developed for small grocery
stores and quick-service retail chains
in the Asian region. A shallower
footprint is designed to hold half-size
sheet pans sideways. This compact
operating depth helps maximize
kitchen space and efficiency and
makes the HCN-5 the ideal choice
for cost-conscious foodservice
operators who wish to obtain the
product quality and productivity
benefits that Henny Penny holding
cabinets are well known for.
The HCN-5 features “flip up”
panels built in to the door that allow
workers to pick product from upper
or lower trays without opening the
door. This saves time and energy in
the kitchen. Units are also commonly
ordered in pass-through design, with a
rear door offering convenient access
from both cooking and service sides.
Additional standard features such as
stainless steel construction, fully
insulated cabinet walls, and self-
closing doors help protect food quality,
reduce waste and provide for more
efficient workflow.
Heavy-duty fan and ventilated side
racks allow hot, moist air to circulate
evenly throughout the cabinet and
keep practically any menu item hot
and tasty until serving. And that
translates into higher food quality and
less waste throughout the day.
Simple electro-mechanical controls
feature thermostat-controlled heat that
lets you adjust the environment to best
suit the food product being held.
HCN-5 half-size heated holding cabinet
with flip-up panels in door. Holds up to 5
half-size sheet pans.
APPROVED APPROVED AS NOTED RESUBMIT
AUTHORIZED SIGNATURE DATE
Electrical
© 2009 Henny Penny Corporation, Eaton, OH 45320 USA Revised 07/12/10
Continuing product improvement may subject specifications to change without notice.
PROJECT ITEM NO
FRONT
610 mm
(
24 in.
)
445 mm
(
17 1/2 in.
)
832 mm
(32 3/4 in.)
Volts Phase Cycle/Hz Watts Amps Wire Plug
240 1 50 1320 5.5 1NG
240V
Type I
Bidding Specifications
Provide Henny Penny Model HCN-5 half-
size heated holding cabinet, designed to
hold hot foods in quality condition at safe
temperatures for long periods of time.
Unit shall be designed for shallow footprint
and accept half-size sheet pans in
sideways orientation.
Unit shall have electro-mechanical controls
with thermostat-controlled adjustable heat.
Provide choice of right or left-hand doors.
Provide choice of solid back or pass-through
design.
Unit shall include 2 clear acrylic flip-up
panels on door. If pass-through, flip-up
panels on front door, only.
If pass-through, unit shall have dual-pane
glass door on rear.
Cabinet interior and exterior shall be of
stainless steel construction.
Unit shall have full perimeter door gasket and
fully insulated sidewalls and control module.
Unit shall have heavy-duty blower motor and
ventilated side racks.
PLAN
Power cord from back or top
This product manufactured in Suzhou, China
Dimensions
Height: 832 mm (32 3/4 in.)
Width: 610 mm (24 in.)
Depth: 445 mm (17 1/2 in.)
Required clearances: N/A
Crated dimensions
Length: 940 mm (37 in.)
Depth: 559 mm (22 in.)
Height: 749 mm (29 1/2 in.)
Volume: 0.39 m³ (13.9 cu. ft.)
Crated weight: 74 kg (162 lbs.)
Water connections: N/A
Heating
Temperature range: 71-99C (160-210F)
Humidity: 1.9 liter (1/2 gal.) water pan
Pan capacity
Accepts up to 5 half size sheet pans
457 x 330 mm (18 x 13 in.) on 102 mm
(4 in.) centers.
MODEL
HCN-5 hal
f
-size
Heated holding cabinet
Continuing product improvement may subject specifications to change without notice.
Henny Penny Corporation
PO Box 60 Eaton OH 45320 USA
+1 937 456.8400 800 417.8417
+1 937 456.8434 Fax 800 417.8434 Fax
www.hennypenny.com
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Henny Penny HC-15 Datasheet
-
-
-
-
-
Henny Penny HHC-997 Datasheet
-
-
-
-