Titan Fitness T-3 Series 36-in Flip Down Safety Bars User manual

Titan Fitness
Brand
Titan Fitness
Model
T-3 Series 36-in Flip Down Safety Bars
Type
User manual

Titan Fitness T-3 Series 36-in Flip Down Safety Bars

These safety bars are designed to be used with the Titan T-3 Power Rack. They provide a safe and secure way to perform exercises such as squats, presses, and bench presses. The bars are made from heavy-duty steel and feature a non-slip surface for added safety. The bars are also adjustable in height, so you can customize them to fit your needs.

Features:

  • Heavy-duty steel construction
  • Non-slip surface for added safety
  • Adjustable in height
  • Easy to install and use

Benefits:

  • Provides a safe and secure way to perform exercises

Titan Fitness T-3 Series 36-in Flip Down Safety Bars

These safety bars are designed to be used with the Titan T-3 Power Rack. They provide a safe and secure way to perform exercises such as squats, presses, and bench presses. The bars are made from heavy-duty steel and feature a non-slip surface for added safety. The bars are also adjustable in height, so you can customize them to fit your needs.

Features:

  • Heavy-duty steel construction
  • Non-slip surface for added safety
  • Adjustable in height
  • Easy to install and use

Benefits:

  • Provides a safe and secure way to perform exercises
-
MPN(s): 36FDWNST3, 24FDWNST3
SKU(s): 400233, 400232
UPC(s): 049008266339, 049008266322
2
KEY DESCRIPTION QTY
1 FLIP DOWN SAFETY 1
2 UHMW PAD (40 X 70 MM) 2
3 UHMW PAD (850 X 47 MM) 1
4 PIN 1
5 LOCK PIN 1
6 M6X12 COUNTER SINK HEX BOLT 7
3
KEY DESCRIPTION QTY
1 FLIP DOWN SAFETY 1
2 UHMW PAD (40 X 70 MM) 2
3 UHMW PAD (560 X 47 MM) 1
4 PIN 1
5 LOCK PIN 1
6 M6X8 COUNTER SINK HEX BOLT 7
4
1. SECURE THE FLIP DOWN SAFETY (1) TO YOUR TITAN T-3 POWER RACK:
Insert the Long Pin into the inner uprights of your Titan T-3 Power Rack while the Flip Down Safety (1) is in
the horizontal position, then push the Flip Down Safety (1) back until the Short Pin is securely in the upright.
2. ATTACH THE FLIP DOWN SAFETY (1) TO YOUR TITAN T-3 POWER RACK:
Rotate the Flip Down Safety (1) into the vertical position, with the J-hook wrapping around your Titan T-3
Power Rack upright, and insert the Pin (4) through your Titan T-3 Rack upright and the Flip Down Safety (1).
Insert the Lock Pin (5) through the end of the Pin (4), then close the Lock Pin (5). This will lock the Pin (4) in
place.
NOTE: There will be a gap between the Flip Down Safety and your Titan T-3 Power Rack, that is completely
normal and does not inhibit the function of the product in any way.
5
This concludes the FDWNST3 Owner’s Manual.
If applicable to your product, make sure to tighten all
nut-and-bolt combinations before use.
Enjoy!
DISCLAIMER
This equipment must be used with care by capable and competent individuals under supervision, if necessary.
The use of any fitness equipment, including this one, involves the potential risk of injury. You accept and assume full
responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may
occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and
agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the
same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW,
COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN
USE OF THE EQUIPMENT.
NEED HELP?
CONTACT US FIRST.
1 (800) 605-8241
info@titandistributorsinc.com /
Business Hours: Monday–Friday • 8:00 a.m.–5:00 p.m. (CT)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Titan Fitness T-3 Series 36-in Flip Down Safety Bars User manual

Titan Fitness
Brand
Titan Fitness
Model
T-3 Series 36-in Flip Down Safety Bars
Type
User manual

Titan Fitness T-3 Series 36-in Flip Down Safety Bars

These safety bars are designed to be used with the Titan T-3 Power Rack. They provide a safe and secure way to perform exercises such as squats, presses, and bench presses. The bars are made from heavy-duty steel and feature a non-slip surface for added safety. The bars are also adjustable in height, so you can customize them to fit your needs.

Features:

  • Heavy-duty steel construction
  • Non-slip surface for added safety
  • Adjustable in height
  • Easy to install and use

Benefits:

  • Provides a safe and secure way to perform exercises
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents