ELAN Lighting CAB-330-BEAM-IP User manual

Brand
ELAN Lighting
Model
CAB-330-BEAM-IP
Category
Floodlights
Type
User manual
CAB-330-BEAM-IP
Thank you for purchasing a product from our CAB-330-BEAM-IP Every suit has been
thoroughly tested and shipped in perfect condition. Carefully check the shipping carton
for damage that may have occurred during shipping. If the carton appears to be damaged,
carefully inspect your unit for any damage and be sure all accessories necessary to operate
the unit has arrived intactly. In the case damage has been found or parts are missing,
please contact Acson Comercial or your local supplier for further instructions. Do not return
this unit without any warning.
USER’S MANUAL
2
Contents
FOR YOUR OWN SAFETY, PLEASE READ
THIS USER MANUAL CAREFULLY BEFORE
POWERING OR INSTALLING. SAVE IT FOR
FUTURE REFERENCE
1. Introduction ............................................................................................................................................ 3
Features
Components
Dimensions
2. Package Info .......................................................................................................................................... 4
3. Safety Information ................................................................................................................................. 4
4. DMX 512 Connection ............................................................................................................................ 5
DMX-512 loop resistance terminal
5. AC Input Power ...................................................................................................................................... 6
Input Voltage
Power Consumption
Fuse Standard
6. Lamp Info ............................................................................................................................................... 6
7. Color and Gobo Wheels Info ............................................................................................................... 7
8. Display Panel ......................................................................................................................................... 7
9. LCD Menu ............................................................................................................................................. 7
10. DMX Channel Data .............................................................................................................................. 10
11. Drive Board .......................................................................................................................................... 14
12. Lamp Changing Method ..................................................................................................................... 14
Theory
Changing Method
13. Body Covers Disassembling Method ................................................................................................ 15
14. Base Part Info and Installation ........................................................................................................... 16
15. Belt Changing Method ........................................................................................................................ 16
13. Attention Items .................................................................................................................................... 17
13. Common Fault ..................................................................................................................................... 17
3
1. Introduction
Thank you for choosing CAB-330-BEAM-IP, our brand new high tech xture with international advan-
ced electronic control technology and excellent user-friendly industrial design. It is fully compliant with CE
standard, and the internationally accepted standard DMX512 signal mode.
The device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written
in this user manual.
• Equipped with the Phoenix MSD 330 15R short focus lamp and multi-layer lens,it can cast bright
beams and clear gobos as well as fresh colors thanks to the the KUPO brand color wheel .
• Two DMX channels mode is available in Chinese and English language versions for you to choose,
and the digits can cast upside-down, convenient to hang them on the truss.
• Pan scans 540°and Tilt runs 270°.
• There are 14 dierent colors plus open and 14 gobos plus open too .
• There are two prisms,one 8 facet and one 6 facet column which can controlled separately or synchro-
nously.
• Aside of the linear dimmer and adjustable strobe functions ,the light is also equipped with the softwa-
re fan speed cooling monitoring system.
• With these super features, CAB-330-BEAM-IP are widely welcomed by TV, DISCO, Ballroom, Night-
club, and other indoor and outdoor big events .
Features
Dimensions
Size: 375(length ) × 372(width ) × 538(height )mm
Components
1
1 2 3 4 5
3
Lens
Arm
Base
3Pin
DMX Out
Fuse
3Pin
DMX In
Body
2
5
Power
Socket
Power
Switch
4
3. Safety Information
2. Package Info
• This device is suitable for professional purposes only. When you receive the light, check if it is broken
caused by delivery. If it’s broken, contact your local dealer as soon as possible .
• The IP rate is 54, suitable for indoor and outdoor performance. The devices should be kept dry and
avoid using it in moist, overheating, dusty environment.
• To avoid damages caused by electric shock, re, UV, lamp burst and device falling etc, please read the
manual thoroughly before charging and installing.
• Make sure you know all the danger notices and abide by the instructions in this manual for correct
operation.
• For more information, please contact your local dealer.
• Manual
• Safety Chain
• Omega Clamp (x2)
• DMX Cable
• Power Wire
Overheating
Lens Burst Prevention
Mounting Accident Prevention
Fire and Burning Prevention
Included accesories:
Working temperature ≤ 40º
Lens Dimension : ø 156×28 mm
• Switch o the device immediately once the
surrounding temperature is over 40℃.
• Change the lens if there are cracks or dent on it.
• Only the original brand lens is suitable to
change
• Do not carry the device alone.
• Make sure the facility can withstand ten times
teh weight of the light before hanging.
• Please make sure the mounting hardware is
strong enough without any damage, and using
the safety chain together for secure. Let the
pulley below the working place when installing
or removing the device .
• Do not install the device on ammable material
surface directly .
• Do not short circuit the temperature protection
terminal or fuse. Use the standard fuse .
• Stay away of the inammable material .
• Do not project the light within 12 M and the
material projected temperature should not be
over projected range of 3 meters away objects
and 60℃ 12m.
• There should not be stu within 0.5m from the
fan or ventilation .
• Do not place anything over the lens .
• Let the device cool for at least 20minutes before
package and delivery .
• Use only approved brand spare parts .
All CAB-330-BEAM-IP lights are packed in 1in1 or 2in1 ight case or carton with accessories inside .
5
4. DMX 512 Connection
• DMX512 cable must use the professional shielded twisted pair cable. The standard loudspeaker cable
is not reliable for controling the long-range data. A 24AWG cable is suitable for more than 300 meters
long-distance signal transmission and must add the DMX 512 signal amplier.
• Do not use two outputs to separate the connection. if separate, a DMX512 splitter is necessary.
• If using the DMX512 splitter, rst connect the DMX512 Splitter input terminal to controller and then
connect from the splitter output terminal to next device.
• Do as above to connect other devices, and nally coupled with a 120 Ω loop resistance terminal
insertion.
Attention!
In order to x the device securely, use 2 omega holders and 4 quick lock fasteners
correctly into the quick lock hole turned 90 clockwise is necessary. Adding a safety
chain to the base hole not the handle is extra and necessary safety method .
!
1
2
Safety
Chain
Omega
Bridge
DMX-512 loop resistance terminal
If the DMX line is too long or placed in some noisy electric signals places like disco ,nightclub ,ballroom
etc, using DMX loop resistance terminal is necessary. Welding a 120Ω resistor terminal between the pin 2
and pin 3 as below and plug it into the last light XLR output terminal .
CONTROLLER
N
Diagram 1
Diagram 2
6
5. AC Input Power
6. Lamp Info
CAB-330-BEAM-IP input voltage, power consumption, and fuse standard.
Input Voltage Power Consumption Frequency
110~240V 550W 50/60HZ
Fuse Voltage Fuse Current Size
250V 5A 5×20
Brand Power Consumption Lifespan Color Temperature
Phoenix 330w 1800hrs 7200K
Live Neutral Earth
Red Blue Yellow-green
Attention!
Only a qualied electrician can operate the power related work. Please make
sure the voltage input complies with the specied standard. The xture must be
grounded and equipped with overload and leakage protection .
!
Warning
To avoid potential damages caused by lamp burst, change
the lamp before it’s over 125% specied lifespan.
!
7
7. Color and Gobo Wheels Info
8. Display Panel
9. LCD Menu
Color Wheel. CAB-330-BEAM-IP is equipped with 14 colors
plus white for pure color and excellent eect .
Fixed Gobo Wheel. CAB-330-BEAM-IP is equipped with
17xed gobos plus open .Better eects with 16 facet prism .
Function
Key
Touch
Screen
Display
2
1
Function Keys
• Return function
• Up/Digit increase/Next function
• Down/Digit decrease/Last function
• Mode choosing/Conrm function
Main Menu Submenu 1 Submenu2 Function SET Function description
DMX Address
<<
1-512
to address 1
< address up
> address down
<< to address 512
SAVE save and back
ESC back
FEATURES
SETTING
Run Mode
DMX DMX
Wire no function
Aoto no function
Chan Mode
Mode1 16CH
Mode2 17CH
8
Main Menu Submenu 1 Submenu2 Function SET Function description
FEATURES
SETTING
Chan Mode
Mode3 18CH
Mode4 20CH
X Reverse
O Pan Scan Normal
On Pan Scan Reverse
Y Reverse
O Tilt Scan Normal
On Tilt Scan Reverse
X Angle
360 360
540 540
XY OCcheck
O Pan/Tilt optical sensor testing o
On Pan/Tilt optical sensor testing on
Signalclear
O keep signal data
On clear signal data
Full color
O half color function
On full color function
Shortcut
O Shortcut o for color and gobo
On Shortcut open for colors and gobo
ADV. Advanced function
RST. Re-setting and back
SAVE Save and back
ESC Back
ADVANCED
FUNCTION
Zero set
ZEROSETTING
Password1 1
Zero reset
Password2 0
KEY Conrm
Pan
0-255 Adjust the beginning state
Tilt
Fixed Gobos
Rot Gobos
Color
Focus
Zoom
Shutter
Prism
Prism2
Gobos Rot
Frost
Gobos Row
Rot
Fixed Go-
bos16b
Rot Gobos16b
Coloe16b
SAVE Save and back
> Numerical value increase
< Numerical value decrease
ESC back
9
Main Menu Submenu 1 Submenu2 Function SET Function description
ADVANCED
FUNCTION
Use Mang Factory use only
Fact Set
X Master 14
X Slave 84
Y Master 14
Y Slave 96
Lamp 5V
Y Angle 230
XY Speed NORM
Logo Neutral
KEY 4KEY
Use
Password1
3
Use
Password2
4
Fact
Passwoed1
1
Fact
Passwoed2
2
FAN OFF
ESC Back
MANUAL
RESET
ALL MOTOR Yes/No
PART MOTOR Yes/No
XY MOTOR Yes/No
TEST RUN
AUTO
NO back
Auto
SOUNO Sound
ESC Back
SIMULATE
DMX
CH1~CH32 0-255 Control Channel on display
> Numerical value increase
< Numerical value decrease
ESC back
ESC Back to main menu
SYSTEM
INFO
DMX VALUE CH1~CH32
0-255 DMX value
ESC back
OTHER INTO
Run Time: 0-9999 Machine runing hours
Run Count: 0-9999
How many time of the Machine power on
and o
Residue T: Most Running time adjust(do not adjust)
Residue C: Most (do not adjust)
Temp1: 0 Temperature 1
Temp2: 0 Temperature 2
Fan 1: 0-9999 Fan 1 speed
Fan 2: 0-9999 Fan 2 speed
PCB1: Vxxx Version 1
PCB2: Vxxx Version 2
PCB3: Vxxx Version 3
10
Main Menu Submenu 1 Submenu2 Function SET Function description
SYSTEM
INFO
OTHER INTO ESC back
ERROR INTO
ESC Back to main menu
DISPLAY
SETTING
Brightness 1~7 Level Back Ground light level
Light Delay
10sec Back Ground light dim out after 10 second.
20sec Back Ground light dim out after 20 second.
30sec Back Ground light dim out after 30 second.
On Keep back ground light on
Menuback
10sec Menu back after 10 second
20sec Menu back after 20 second
30sec Menu back after 30 second
O Ban the menu auto back function
Flicker
O Back ground light ash function o
On Back ground light ash function on
SAVE Save and back
ESC Back
LAMP
SETTING
Default
O Lamp o
On Lamp on
Manual
O Lamp o by manual
On lamp on by manual
Electronic
O Lamp o
On Lamp on
Language
Setting
English
Available languages
Chineese
Mode 1 Mode 2 Mode 3 Mode 4 DMX Value Details Description
1CH 1CH 1CH 1CH
0 - 4 Open
5 - 8 Open + Color 1
9 - 12 Color 1
13 - 17 Color 1 + Color 2
18 - 21 Color 2
22 - 25 Color 2 + Color 3
26 - 29 Color 3
30 - 34 Color 3 + Color 4
35 - 38 Color 4
39 - 42 Color 4 + Color 5
43 - 46 Color 5
47 - 51 Color 5 + Color 6
52 - 55 Color 6
10. DMX Channel Data
11
Mode 1 Mode 2 Mode 3 Mode 4 DMX Value Details Description
1CH 1CH 1CH 1CH
56 - 59 Color 6 + Color 7
60 - 63 Color 7
64 - 68 Color 7 + Color 8
69 - 72 Color 8
73 - 76 Color 8 + Color 9
77 - 81 Color 9
82 - 85 Color 9 + Color 10
86 - 89 Color 10
90 - 93 Color 10 + Color 11
94 - 98 Color 11
99 - 102 Color 11 + Color 12
103 - 106 Color 12
107 - 110 Color 12 + Color 13
111 - 115 Color 13
116 - 119 Color 13 + Color 14
120 - 123 Color 14
124 - 127 Color 14+ Open
128 - 187 Color rotation (clockwise) fast ->slow
188 - 195 Rotation Halt
196 - 255 Color rotation (anticlockwise) slow ->fast
2CH 2CH 2CH 2CH
0 - 1 Close
2 - 7 Open
8 - 63 Strobe ,Slow ->Fast
64 - 71 Open
72 - 127 Pulse strobe ,Slow ->Fast
128 - 135 Open
136 - 160 Fade strobe ,Slow ->Fast
161 - 166 Open
167 - 191 Lightening strobe , Slow ->Fast
192 - 199 Open
200 - 209 Strobe mode 1
210 - 219 Strobe mode 2
220 - 229 Random slow strobe
230 - 239 Random medium speed strobe
240 - 249 Random fast peed
250 - 255 Open
3CH 3CH 3CH 3CH 0 - 255 Brightness ,Dark ->Bright
4CH 4CH 4CH 4CH
0 - 3 Open
4 - 7 Gobo1
8 - 11 Gobo2
12 - 15 Gobo3
16 - 19 Gobo4
12
Mode 1 Mode 2 Mode 3 Mode 4 DMX Value Details Description
4CH 4CH 4CH 4CH
20 - 23 Gobo5
24 - 27 Gobo6
28 - 31 Gobo7
32 - 35 Gobo8
36 - 39 Gobo9
40 - 43 Gobo10
44 - 47 Gobo11
48 - 51 Gobo12
52 - 55 Gobo13
56 - 59 Gobo14
60 - 63 Gobo15
64 - 67 Gobo16
68 - 71 Gobo17
72 - 113 Clockwise rotation Fast ->Slow
114 - 117 Halt
118 - 159 Anticlockwise Slow ->Fast
160 - 166 Gobo2 shake ,Slow ->Fast
167 - 172 Gobo3 shake ,Slow ->Fast
173 - 179 Gobo4 shake ,Slow ->Fast
180 - 185 Gobo5 shake ,Slow ->Fast
186 - 191 Gobo6 shake ,Slow ->Fast
192 - 198 Gobo7 shake ,Slow ->Fast
199 - 204 Gobo8 shake ,Slow ->Fast
205 - 211 Gobo9 shake ,Slow ->Fast
212 - 217 Gobo10 shake ,Slow ->Fast
218 - 223 Gobo11 shake ,Slow ->Fast
224 - 230 Gobo12 shake ,Slow ->Fast
231 - 236 Gobo13 shake ,Slow ->Fast
237 - 243 Gobo14 shake ,Slow ->Fast
244 - 349 Gobo15 shake ,Slow ->Fast
250 - 255 Gobo16 shake ,Slow ->Fast
5CH 5CH 5CH 5CH
0 - 127 Prism 1 Out
128 - 255 Prism 1 In
6CH 6CH 6CH 6CH
0 - 127 0°-> 360°
128 - 187 Clockwise rotation, Fast ->Slow
189 - 195 Halt
196 - 255 Anticlockwise rotation slow ->fast
7CH 7CH 7CH 7CH
0 - 255 Prism zoom out
0 - 255 Prism zoom in
8CH
0 - 127 Prism 2 Out
128 - 255 Prism 2 In
13
Mode 1 Mode 2 Mode 3 Mode 4 DMX Value Details Description
9CH
0 - 127 0°-> 360°
128 - 187 Clockwise rotation, Fast ->Slow
189 - 195 Halt
196 - 255 Anticlockwise rotation slow ->fast
8CH 8CH 8CH 10CH 0 - 255 Linear dimmer 0-100%
9CH 9CH 9CH 11CH 0 - 255 Linear focus 0-100%
10CH 10CH 10CH 12CH 0 - 255 X 0°-> 540°
11CH 11CH 11CH 13CH 0 - 255 X Fine tune 2° >117°
12CH 12CH 12CH 14CH 0 - 255 Y 0°-> 270°
13CH 13CH 13CH 15CH 0 - 255 Y Fine tune 2° >117°
14CH 14CH 14CH 16CH
0 - 149 Empty
150 - 159 Built-in program 1
160 - 169 Built-in program2
170 - 179 Testing program
180 - 255 Empty
15CH 15CH 15CH 17CH
0 - 69 Empty
70 - 79 Eect motors reset (wait 8 s)
80 - 89 XY motors reset (wait 8 s)
90 - 99 All motors reset (wait 8 s)
100 - 255 Empty
16CH 16CH 16CH 18CH
0 - 49 Empty
50 - 59 Turn on the lamp (wait 8 s)
60 - 69 Turn o the lamp (wait 8 s)
70 - 255 Empty
17CH 17CH 19CH 0-255 X Y speed
18CH 20CH
0 - 63 half color function on
64 - 127 Half color function o
128 - 191 Color wheel slide mode (linear slide )
192 - 255
Block light mode (Blocking the light during
changing color)
14
11. Drive Board
12. Lamp Changing Method
Drive board illustration.
1
2
Lamp Fixed Position
Press the Lamp to
make it leave the xed
position then tilt it out
Steel spring blade to hold
the lamp from falling
Theory
15
13. Body Covers Disassembling Method
Changing Method
1
Lamp Fixed Position
2
Remove the fan
3
Remove the lamp
1
Open both side axle covers
2
Remove head cover
3
Remove body cover
16
14. Base Part Info and Installation
15. Belt Changing Method
Attention
After repairing the base part,
put the cabinet cover and push
it back and x it with the four
corner screws .
Fix the base steel right into the
rubber seal strip before pushing
back the plastic base cover, then
tighten the screws of the plastic
cover.
!
1
Open basement
plastic cover
2
Loosen screws
and draw boards
unit out
3
Open boards
unit cover
1
Open basement
plastic cover
2
Loosen screws
and draw power
supply unit out
3
Open power
unit cover
Power Board
Basement Cover
Power
Supply Unit
Basement
Plastic Cover
Sealing Rubber Strips
Ignitor
DC380 PFC (below the ignitor)
24V Power Supply
Instructions
1. Open the arm covers [
1
2
]
2. Remove the center cover [
3
]
3. Remove the Y belt [
4
]
4. Remove the side screws [
5
]
5. Unplug the wire connector [
6
]
6. Reemove the light arm and body [
7
]
7. Remove the hexagon screws [
8
]
8. Remove the beam units [
9
]
9. Change X belt [
10
]
Screws
17
16. Attention Items
17. Common Faults
• Check the light seal situation and make sure it’s not
damaged before operating it .
• The device can be installed normally and upside-down,
• The device is only up to IP 54 waterproof standard wi-
thout fully sealing structure ,therefore do not immerse
it into water. Any damage caused by the incorrect
operation won’t be covered by warranty .
• Do not touch the device when using it in rain. Electric
leakage may occur. If wet, avoid electric shock by
always manipulating the xture with insulating gloves.
Correct Installations
1. The lamp cannot be ignited or intermittently
turns o
• Check the input 220V is correct.
• Check if the strobe channel is open or not.
• Check the fan speed by entering the main
menu INFO. (Fan 1 speed should be over
4500. Fan 2 speed should be over 3200)
• Check the PFC which should be with 220V
in and DC380V out.
• Check if the basement fans are running or
not.
2. Beam turns dim
• The bulb may be expired, try replacing it.
• Make sure the lens is clear.
• Clean the dust o the bulb and clean the
device regularly.
3. Motors not working
• Check and make sure the power supply is
suitable and fuse is not burnt.
• Check if the motor wires have been worn
out.
• Check if the motor is stuck or the x screws
loosened.
• Check if the IC on the PCB are loose, poorly
connected, or burnt.
• Check if the motor or the PCB is burnt.
4. Device can not be controlled with DMX value
blinking
• DMX setting might be incorrect or the devi-
ce might not be receiving a signal.
• DMX signal cable is not connected well.
• DMX cable signal + and signal - are inver-
sely weld.
• Serial connection is too long and the signal
get attenuated.
• Surrounding signal interference, the contro-
ller is damaged, or the signals incompatible.
• Running the built-in program mode.
5. Casting halo light
• Check and make sure the focus value is
suitable for the distance cast.
6. Device workin intermittently
• Check the fan if running normal or if it is
dusty.
7. The light can not be started
• Check if power supply is normal
• Make sure the power switch is on.
Note: All information is subject to change without prior notice.
IMPORTANT
In order to optimize the recovery and recycling of the materials that old appliances contain
and reduce the impact on human health and the environment, please make sure that this
product is recycled at the end of its life.
Importer:
ACSON COMERCIAL
C/Pallars, 405
08019 Barcelona
www.acson.com
[email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

ELAN Lighting CAB-330-BEAM-IP User manual

Brand
ELAN Lighting
Model
CAB-330-BEAM-IP
Category
Floodlights
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents