LARSON 92002052 User manual

Type
User manual
NOTE: construction styles may vary.
Guardsman Collection
GUIDE TO MEASURING
5
LARSON
®
Vendor Number: 62847
www.LARSONdoors.com
GUARDSMAN COLLECTION
Required: 1" wide x 1" deep mounting surface
1-in
NOTE: construction styles may vary.
MODELS
STANDARD
DOOR WIDTH OPENING WIDTH RANGE OPENING HEIGHT RANGE
Zions
Courtyard
Garden View
SoHo
Mesa
Orleans
32-in 31-7/8-in to 32-3/8-in
79-3/4-in to 81-in
36-in 35-7/8-in to 36-3/8-in
Provide the opening size as indicated on the chart below. The overall
product width and height is adjusted so the unit fits inside the opening.
A 1-in x 1-in mounting surface is required.
RECESS MOUNT APPLICATION
SINGLE
A standard 36-in-x 80-in door is shown. The rails mount inside the
opening and require a 1" wide by 1" deep mounting surface.
DOUBLE
A standard 72-in opening shown. 71 7/8-in to 72 3/8-in opening
size. A 1" wide by 1" deep mounting surface is required.
A
WIDTH
B
WIDTH
C
WIDTH
D
HEIGHT
D
A
B
C
RECORD
YOUR
MEASUREMENTS
38-in
LH RH
LOCK BOX LOCATION
Hardware location for Guardsman Collection doors are
gured from the top down to the center of the top hole.
Based on a standard 80-in door, this measurement is 38-in.
NOTE:
Make sure that your new handle does not interfere with
prime door handle; always check projection depths when
purchasing hardware.
Adjusted lead times and pricing varies.
KNOW YOUR HINGING
When ordering, specify left-hinge or right-hinge
as viewed from outside.
  • Page 1 1

LARSON 92002052 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI