LIST OF ITEMS:
Base stand
Mounting set
Wheels 4pcs.
Installation manual
1. Installation & Adjusment:
A. Install 4 wheels „A” to the base stand of LIBRA mobil
B. Join stand elements B1, B2 using elements C. Fasten wih
screws to the base stand – A. Install in marked place
elements D. Use screws from mounting set.
C.
D. On expected height install element E (according to picure
below). Optional shelf F – Install in marked place as on
picture below. Use mounting screws from mounting set.
E. Mounting arms B attach do back side of display/TV, using
mounting screws from mounting set.
WARNING! Correct mounting of elements is required for
safety usage (as on piture below)
LIBRA MOBIL
Mobile stand for flat display/TV
1/2
F. On element E, hang Flat screen with already mounted
arms G. Check correction of installation.
WARNING! Correct mounting of arms G on a mount E is
required for safety usage (as on piture below)
G. Tighten the locking screws until you feel resistance.
Ensure that monitor/TV is stable on mount
2. Technical Specification:
Product model:
LIBRA MOBIL
Adjustment:
Up-Down – 31 degree or fixed
Weight:
30 kg
Capacity:
75 kg
3. Mounting kit set :
bolts:
Hex. M5x16 – 4 pcs.
Hex. M6x16 – 4 pcs.
Hex. M8x16 – 4 pcs.
Hex.. M5x25 – 4 pcs.
Hex. M6x25 – 4 pcs.
Hex. M8x45 – 4 pcs.
Flat head. M6x25 – 4 pcs.
Hex Head M6x35 – 2 pcs.
Hex Head M8x45 – 8 pcs.
Hex Head M8x55 – 4 pcs.
nuts:
M8 – 8 pcs.
washers:
ø 8x16 – 12 pcs.
ø 6x24 – 4 pcs.
ø 6x18 – 4 pcs.
spacers:
ø 6x15 – 4 pcs.
ø 8x30 – 4 pcs.
tools:
Hex. 4 – 1 pcs.
Hex. 5 – 1 pcs.
Hex. 6 – 1 pcs.
wheels:
4 pcs.
Produced by: VIZ-ART Automation
tel.+48 22/6138899 www.viz-art.pl
2/2
/
