Viz-Art Automation LIBRA MOBIL Installation guide

Type
Installation guide
LIST OF ITEMS:
Base stand
Mounting set
Wheels 4pcs.
Installation manual
1. Installation & Adjusment:
A. Install 4 wheels „A” to the base stand of LIBRA mobil
B. Join stand elements B1, B2 using elements C. Fasten wih
screws to the base stand A. Install in marked place
elements D. Use screws from mounting set.
C.
D. On expected height install element E (according to picure
below). Optional shelf F Install in marked place as on
picture below. Use mounting screws from mounting set.
E. Mounting arms B attach do back side of display/TV, using
mounting screws from mounting set.
WARNING! Correct mounting of elements is required for
safety usage (as on piture below)
LIBRA MOBIL
Mobile stand for flat display/TV
1/2
F. On element E, hang Flat screen with already mounted
arms G. Check correction of installation.
WARNING! Correct mounting of arms G on a mount E is
required for safety usage (as on piture below)
G. Tighten the locking screws until you feel resistance.
Ensure that monitor/TV is stable on mount
2. Technical Specification:
Product model:
LIBRA MOBIL
Adjustment:
Up-Down 31 degree or fixed
Weight:
30 kg
Capacity:
75 kg
3. Mounting kit set :
bolts:
Hex. M5x16 4 pcs.
Hex. M6x16 4 pcs.
Hex. M8x16 4 pcs.
Hex.. M5x25 4 pcs.
Hex. M6x25 4 pcs.
Hex. M8x45 4 pcs.
Flat head. M6x25 4 pcs.
Hex Head M6x35 2 pcs.
Hex Head M8x45 8 pcs.
Hex Head M8x55 4 pcs.
nuts:
M8 8 pcs.
washers:
ø 8x16 – 12 pcs.
ø 6x24 – 4 pcs.
ø 6x18 – 4 pcs.
spacers:
ø 6x15 – 4 pcs.
ø 8x30 – 4 pcs.
tools:
Hex. 4 1 pcs.
Hex. 5 1 pcs.
Hex. 6 1 pcs.
wheels:
4 pcs.
Produced by: VIZ-ART Automation
tel.+48 22/6138899 www.viz-art.pl
2/2
  • Page 1 1
  • Page 2 2

Viz-Art Automation LIBRA MOBIL Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI