PARALLEL BARS
Fitness Station
Installation Instructions
REF: FS102 - PARALLEL BARS Fitness Station
pg 1 of 7
x8 (M12 135* cup square hex)
x8 (M12 Nylocs)
PARTS required
REF: FS102 - PARALLEL BARS Fitness Station
x4 (SLABBED 1 side)
x2 (‘FITNESS STATION’ Metal 1.8m BAR)
x8 (Covered end cap R60)
NOT STANDARD END CAP - has a
radius cut into it
FS2a
FS2a
FS2a
FS2a
FS2a
pg 2 of 7
TOOLS required
REF: FS102 - PARALLEL BARS Fitness Station
pg 3 of 7
Foundation Details
REF: FS102 - PARALLEL BARS Fitness Station
TIMBER SUPPORT POST
CONCRETE
SOIL
FINISHED GROUND LEVEL
pg 4 of 7
Surfacing Details
REF: FS102 - PARALLEL BARS Fitness Station
pg 5 of 7
= MINIMUM SPACE
= SURFACE AREA
1
Assembly Instructions
REF: FS102 - PARALLEL BARS Fitness Station
Attach the Fitness station bars to the FS2a timbers
Using M12 135* cup square hex / NYLOCS / Covered end cap R60
M12 x 135mm CUP
SQUARE and COVERED
END R60
NOT STANDARD END CAP -
has a radius cut into it
NOTE: Fitness Station bars ALWAYS
attach to SLABBED FACE / FLAT SIDE
pg 6 of 7
FITNESS STATION 1.8m BAR
FS2a
Additional Drawings
REF: FS102 - PARALLEL BARS Fitness Station
pg 7 of 7
1.43m
1.35m
0.73m
GL
Ground Level
/
