Kingston Technology KVR16LE11K4/32 Datasheet

Category
Memory modules
Type
Datasheet

Kingston Technology KVR16LE11K4/32 is a powerful memory module kit designed to enhance your computing experience. With a capacity of 32GB (4x8GB) and a speed of DDR3-1600, it offers fast and reliable performance for demanding applications. Its low voltage requirement of 1.35V or 1.5V ensures efficient operation while reducing power consumption. Whether you're a gamer, content creator, or multitasker, this memory kit provides the speed and capacity you need to handle your tasks smoothly.

Kingston Technology KVR16LE11K4/32 is a powerful memory module kit designed to enhance your computing experience. With a capacity of 32GB (4x8GB) and a speed of DDR3-1600, it offers fast and reliable performance for demanding applications. Its low voltage requirement of 1.35V or 1.5V ensures efficient operation while reducing power consumption. Whether you're a gamer, content creator, or multitasker, this memory kit provides the speed and capacity you need to handle your tasks smoothly.

KVR16LE11K4/32
32GB (8GB 2Rx8 1G x 72-Bit x 4 pcs.)
PC3L-12800 CL11 240-Pin ECC DIMM Kit
DESCRIPTION
ValueRAM's KVR16LE11K4/32 is a kit of four 1G x 72-bit (8GB)
DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 2Rx8, ECC,
low voltage, memory modules, based on eighteen 512M x 8-bit
FBGA components per module. Total kit capacity is 32GB. The
SPDs are programmed to JEDEC standard latency DDR3-1600
timing of 11-11-11 at 1.35V or 1.5V. Each 240-pin DIMM uses
gold contact fingers. The electrical and mechanical specifica-
tions are as follows:
FEATURES
JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~
1.575V) Power Supply
VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
800MHz fCK for 1600Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
Bi-directional Differential Data Strobe
Thermal Sensor Grade B
Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
Asynchronous Reset
PCB: Height 1.18” (30mm), double sided component
Document No. VALUERAM1420-001.A00 03/05/14 Page 1
Memory Module Specifi cations
Continued >>
SPECIFICATIONS
CL(IDD) 11 cycles
Row Cycle Time (tRCmin) 48.125ns (min.)
Refresh to Active/Refresh 260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 35ns (min.)
Maximum Operating Power (1.35V) = 2.041 W*
(Per module)
UL Rating 94 V - 0
Operating Temperature 0
o
C to 85
o
C
Storage Temperature -55
o
C to +100
o
C
*Power will vary depending on the SDRAM.
Document No. VALUERAM1420-001.A00 Page 2
Units: millimeters
30.00
18.80
15.80
11.00
8.00
0.00
133.35
0.00
54.70
TECHNOLOGY
MODULE DIMENSIONS:
  • Page 1 1
  • Page 2 2

Kingston Technology KVR16LE11K4/32 Datasheet

Category
Memory modules
Type
Datasheet

Kingston Technology KVR16LE11K4/32 is a powerful memory module kit designed to enhance your computing experience. With a capacity of 32GB (4x8GB) and a speed of DDR3-1600, it offers fast and reliable performance for demanding applications. Its low voltage requirement of 1.35V or 1.5V ensures efficient operation while reducing power consumption. Whether you're a gamer, content creator, or multitasker, this memory kit provides the speed and capacity you need to handle your tasks smoothly.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI