2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Mounting kits
  6. Shuttle
  7. PV02
PV02

Shuttle PV02 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Shuttle PV02 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the Shuttle PV02?
    What is the purpose of the Shuttle PV02?
    What are the dimensions of the Shuttle PV02?
    What material is the Shuttle PV02 made of?
    What VESA standards does the Shuttle PV02 support?
    What is included in the scope of delivery for the Shuttle PV02?
    How do I install the Shuttle PV02?
Product Specification
www.shuttle.com
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121-47 69 00
[email protected]
Pa
g
e 1
|
11 Au
g
us
t
2011
©2009 by Shuttle Computer Handels GmbH (Germany). All Information subject to change without notice. Pictures for illustration puposes only.
VESA mount accessory PV02 –
for XG41 series Slim PCs
Its optional VESA75/100 wallmount allows the Shuttle Slim-PC XG41 to
be installed on to walls or just affixed on the rear side of a monitor
which is particularly interesting for the industry segment, company
buildings and public institutions.
Feature Highlight
Scope of
delivery
 VESA mount
 2 screws
Marterial
 Metal, black
Dimensions
 approx. 22 x 10 x 8 cm WHD
 (without mounting screw)
Compatibility
 Compatible with Shuttle XG41 Slim-PC
series
 Supports 75 and 100mm VESA standards
Shuttle Accessor
y
PV02
Article number: PV02
Order number: POI-PV02
Images for illustration purposes only.
Mounting screw
Product Specification
www.shuttle.com
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121-47 69 00
[email protected]
Pa
g
e 2
|
11 Au
g
us
t
2011
©2009 by Shuttle Computer Handels GmbH (Germany). All Information subject to change without notice. Pictures for illustration puposes only.
XG41 VESA Mount (PV02) – Quick Installation Guide
Please install with reference to the following
steps:
Due to safety reasons, please turn off your
computer completely first and unplug it
from the power supply.
Please unpack the PV02 VESA mount
accessory and two screws.
Fasten the VESA MOUNT at rear of LCD
monitor with two screws.
As shown, install the XG41 in the VESA
MOUNT and push it towards the direction
as indicated by the red arrow.
Slide the latch into the lock position.
Check that it is properly aligned, then
tighten securely with one thumbscrew.
/