Brodit 804704 Datasheet

Category
Holders
Type
Datasheet
27 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 804704
804704 ProClip
Left mount, NOT for the Coupe model
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288047041
Item no 804704 fits:
Cadillac CTS 11-13 (For USA)
1(2)
1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Pull/flip the rubber sealant on the A-post open.
2. Insert the angled edge on the lower part of the ProClip into the gap and hook it behind the A-post panel edge.
3. Press firmly upwards with your left hand on the bottom part of the ProClip and leftward on the right side of the
ProClip with your other hand. Press until you see or hear/feel the angled edge on the upper part of the ProClip
hook around the A-post panel edge by the windshield.
4. The ProClip is in place.
2(2)
  • Page 1 1
  • Page 2 2

Brodit 804704 Datasheet

Category
Holders
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI