EnGenius EMP9605H is a high-performance wireless networking device designed for long-range data transmission. With its high output power and advanced antenna architecture, it provides a stable and reliable connection even in challenging environments. Here are some of the key features and capabilities of the EMP9605H:
- Long-Range Connectivity: The EMP9605H boasts an impressive output power of up to 28dBm, enabling it to transmit signals over extended distances, making it ideal for applications such as wireless bridges or connecting remote devices.
- Enhanced Sensitivity: The device features exceptional receive sensitivity, allowing it to pick up even weak signals, ensuring a stable connection even in areas with limited signal strength.
EnGenius EMP9605H is a high-performance wireless networking device designed for long-range data transmission. With its high output power and advanced antenna architecture, it provides a stable and reliable connection even in challenging environments. Here are some of the key features and capabilities of the EMP9605H:
- Long-Range Connectivity: The EMP9605H boasts an impressive output power of up to 28dBm, enabling it to transmit signals over extended distances, making it ideal for applications such as wireless bridges or connecting remote devices.
- Enhanced Sensitivity: The device features exceptional receive sensitivity, allowing it to pick up even weak signals, ensuring a stable connection even in areas with limited signal strength.
ETI—Brands that communicate
TM
888.735.7888 www.engeniustech.com
EMP9605H
T H E L E A D E R I N L O N G R A N G E B U S I N E S S C L A S S W I R E L E S S D AT A
EMP9605H is a mini-PCI type IIIA
802.11n radio module with up to
28dBm high output power that
provides ultra long-range wireless
networking in 2.4GHz radio operation
and supports up to 300Mpbs data rate.
The shrinking dimension and light
weight can easily be integrated into
wide range embedded systems.
High Speed, High Output RF Power
802.11 b/g/n 2.4GHz 2T2R Mini
PCI Module
Features
B E S T R E C E I V E S E N S I T I V I T Y L E V E L
I N I T S C L A S S
-95dBm@6Mbps
-80dBm@54Mbps
-94dBm@MCS0/MCS8
-76dBm@MCS7/MCS15
R A D I O O P E R A T I O N
IEEE 802.11 b/g/n
D A T A R A T E S
U
p to 300Mbps
A N T E N N A A R C H I T E C T U R E
2x2 MIMO Operation
M M C X A N T E N N A C O N N E C T O R
Two MMCX connectors
S P E C I F I C A T I O N S
Hardware Specifications
Standard
WECA(WiFi & WiFi5 Compliance), IEEE802.11b/g/n, RoHS
Chipset
Atheros AR9220
Physical Interface
32-bit Mini-PCI Type III A, 2 x MMCX Connector
Available transmit power (5V)
802.11n (2.4GHz) 802.11g 802.11b
27dBm @ MCS0~2/MCS8~10 23dBm @ MCS5/MCS13
26dBm @ MCS3/MCS11 22dBm @ MCS6/MCS14
24dBm @ MCS4/MCS12 21dBm @ MCS7/MCS15
26dBm @ 6~24Mbps 23dBm @ 48Mbps
25dBm @ 36Mbps 21dBm @ 54Mbps
28dBm@1~11Mbps
Power Requirements
Advanced Power Consumption Management
Jump Wire ON : External DC power in supported, Voltage=5V
Jump Wire OFF : Only Support DC Power from Mini-PCI Slot=3.3V
Current Consumption Information
Tx Current Consumption
(without jump wire)
Continuous [email protected] <2A
Continuous [email protected] <2A
Rx Current Consumption Continuous Rx <450mA
Card on Current Data Communicating with AP <450mA
Sleep Current Sleep Mode <100mA
Frequency Band
802.11b/g/n
2.412GHz ~ 2.472GHz
Data rate
Up to 300Mbps
Receive Sensitivity (Typical)
802.11n (2.4GHz) 802.11g 802.11b
-94dBm @ MCS0/MCS7 -76dBm @ MCS8/MCS15 -95dBm @ 6Mbps -79dBm @ 54Mbps
-97dBm@1Mbps -90dBm@11Mbps
Available transmit power (3.3V)
802.11n (2.4GHz) 802.11g
802.11b
25dBm @ MCS0~2/MCS8~10 21dBm @ MCS5/MCS13
24dBm @ MCS3/MCS11 20dBm @ MCS6/MCS14
22dBm @ MCS4/MCS12 19dBm @ MCS7/MCS15
24dBm @ 6~24Mbps 21dBm @ 48Mbps
23dBm @ 36Mbps 19dBm @ 54Mbps
26dBm@1~11Mbps
Software Specifications
Security
WPA, WPA2, 64/128 bits WEP, TKIP and AES
Hardware base IEEE 802.11i encryption engine
Environment & Physical
Temperature Range
-30°C to 80°C (-22°F to 176°F)
Humidity (non-condensing)
0%～95% typical
Dimensions
66mm (L) x 59.5mm (W) x 5mm (H)
Weight
16g
* Theoretical wireless signal rate based on IEEE standard of 802.11 b, g, n chipset used.
Actual throughputmay vary. Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice.
A D V A N C E D P O W E R C O N S U M P T I O N
M A N A G E M E N T
Effectively reduce the total power consumption on
the platform up to 3.3V, but also support External
DC 5V power for high power transmission.
-
1
EnGenius EMP9605H is a high-performance wireless networking device designed for long-range data transmission. With its high output power and advanced antenna architecture, it provides a stable and reliable connection even in challenging environments. Here are some of the key features and capabilities of the EMP9605H:
- Long-Range Connectivity: The EMP9605H boasts an impressive output power of up to 28dBm, enabling it to transmit signals over extended distances, making it ideal for applications such as wireless bridges or connecting remote devices.
- Enhanced Sensitivity: The device features exceptional receive sensitivity, allowing it to pick up even weak signals, ensuring a stable connection even in areas with limited signal strength.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Motorola Orthus User manual
-
Contec FXA2000 Owner's manual
-
Contec FXE2000 Owner's manual
-
-
-
Ubiquiti Networks SR71-15 Datasheet
-
Abocom WM5100 User manual
-
Dell PowerConnect W-AP105 Datasheet
-
Zebra AP-6532-66040-EU Datasheet
-