Ronix 2250 User manual

Category
Power tools
Type
User manual

Ronix 2250 is a versatile power tool designed for a range of drilling applications in wood, steel, and concrete. It features a powerful 850W motor that delivers up to 3000RPM, ensuring efficient and precise drilling. The variable speed control allows you to adjust the speed according to the material and task, while the keyed chuck provides a secure hold on drill bits.

Ronix 2250 is a versatile power tool designed for a range of drilling applications in wood, steel, and concrete. It features a powerful 850W motor that delivers up to 3000RPM, ensuring efficient and precise drilling. The variable speed control allows you to adjust the speed according to the material and task, while the keyed chuck provides a secure hold on drill bits.

IMPACT DRILL 13 mm
2250
USER MANUAL 1
SPECIFICATION
Model 2250
Voltage 220-240V
Frequency 50-60Hz
Power input 850W
No load speed 0-3000RPM
Chuck Size 13mm
Chuck Typ Keyed
Max Drilling capacity in Wood 20mm
Max Drilling capacity in Steel 13mm
Max Drilling capacity in Concrete 13mm
Weight 2Kg
OVERVIEW
Drill chuck
Side handle
Drilling / Hammer drilling
mode switch
Direction
switch
Locking
button
Operating switch
with speed
regulator wheel
Depth rod
IMPACT DRILL
2
NOTE:
In order to achieve the best performance of your product, please
read this instruction manual carefully before using, and keep it for
future reference.
CAUTION:
To reduce the risk of electric shock do not open this device, there are
not serviceable parts for customers. Please refer any maintenance or
repair to qualified personnel.
This sign means the existence of dangerous voltage at the inside of
the unit, which states a risk of electric shock.
This sign means that there are important instructions of operation
and handling in the manual that comes with this device.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING!
- Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and or serious injury.
- Save all warnings and instructions for future reference.
- The term “power tool” in the warnings refers to your mains-operated
(corded) power tools or battery operated (cordless) power tool.
.WORK AREA SAFETY
- Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
- Don’t operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
USER MANUAL 3
.ELECTRIC SAFETY
- Power tool plugs must match the outlet. Never modify the plug in any
way. Don’t use any adaptor plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
- Avoid body contact with earthed or grounded surfaces such as pipe,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
- Don’t expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
- Don’t abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increased the risk of
electric shock.
- When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Using a cord suitable for outdoor use will reduce the risk
of electric shock.
- If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
- Use of power supply via a RCD with a rated residual current of 30mA
or less is always recommended.
.PERSONAL SAFETY
- Stay alert, watch what you are doing and use common sense when
operating a power tool. Don’t use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
- Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
- Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
IMPACT DRILL
4
carrying the tool. Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites accidents.
- Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
- Don’t overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
- Dress properly. Don’t wear loose clothing or jewelry. Keep your hair,
clothing, and gloves away from moving parts. Loose cloths, jewelry or
long hair can be caught in moving parts.
- If devices are provided for connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust-related hazards.
POWER TOOL USE AND CARE
- Don’t force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
- Don’t use the power tool if the switch doesn’t turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and
must be repaired.
- Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories,
or storing power tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
- Store idle power tools out of the reach of children and don’t allow
persons unfamiliar with power tool or these instructions to operate the
power tool. Power tools are dangerous in the hand s of untrained users.
- Maintain power tools. Check for misalignment or binding of moving
parts, breakage o parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
- Keep cutting tools sharp and clean. Properly maintained cutting tools
USER MANUAL 5
with sharp cutting edges are less likely to bind and are easier to control.
- Use the power tool, accessories and tool bits etc. in accordance with
the instruction, taking into account the working conditions and the work
to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
SERVICE
- Have your power tool serviced by qualified repair person using only
identical replacement parts. This will ensure that the safety of power tool
is maintained.
- Follow instruction for lubricating and changing accessories.
- Keep handles dry, clean and free from oil and grease.
HAMMER DRILL SAFETY WARNINGS
- Wear ear protectors when impact drilling. Exposure to noise can cause
hearing loss.
- Use auxiliary handle(s), if supplied with tool. Loss of control can cause
personal injury.
- Hold power tool by insulated gripping surface, when performing an
operation where the cutting accessory may contact hidden wiring or its
own cord. Cutting accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator and
electric shock.
- Always be sure you have a firm footing. Be sure no one is below when
using the tool in high locations.
- Hold the tool firmly with both hands.
- Keep hands away from rotating parts.
- Don’t leave the tool running. Operate the tool only when hand-held.
- Don’t touch the bit or the work piece immediately after operation; they
may be extremely hot and cold burn your skin.
- Some material contains chemical which may be toxic. Take caution to
prevent dust inhalation and skin contact. Follow material supplier safety data.
IMPACT DRILL
6
THIS DRILL HAS THE FOLLOWING FUNCTION
The operating switch (6) is used for all work carried out with the drilling
machine. With the speed selection via the regulator wheel you have
optimum control of the machine.
The machine can be set to continuous operation with the locking button (5).
The side handle (2) gives you an additional way of holding the machine firmly.
Depending on the position of the hammer drilling/drilling switch(3), you
can use your drilling machine as a percussion drill or rotating drill.
The direction switch (4) controls the direction of motion when the
machine is used as a screwdriver or if you would like to remove a drilling
bit that has become jammed.
Using the adjustable bit stop you can fix the depth of blind holes
accurately during drilling.
PREPARING THE DRILLING MACHINE
WARNING!
When performing the following work, always ensure that the machine is
not connected to the mains power supply
.INSERTING THE SIDE HANDLE (2)
In order to assemble the side handle (2), release it by rotating the
lower part anti-clockwise so that you can easily pull the handle over
the drill chuck on to the flange located behind it. Then turn the handle
to a working position that is comfortable for you and fix it in place by
tightening it (rotating the lower part clockwise).
.ADJUSTING THE BIT STOP
The side handle (2) has a retainer for the bit stop. Insert a drill. Now release the
handle. Push the bit stop forwards until its end is in line with the end of the drill.
Now push the bit stop back until the distance between the end of the bit stop
and the end of the drill corresponds to the depth to which you would like to drill.
USER MANUAL 7
.INSERTING THE DRILL
First remove the mains supply from the socket. Turn the ring of the drill
chuck (1) until the clamping jaws are open wide enough. Insert the drill
into the clamping jaws of the drill chuck (1).
WORKING WITH THE DRILLING MACHINE
Ensure that the mains power supply voltage is the same as the operating
voltage of your machine. For details, please see the type plate. Insert
the correct drill for the type of job to be performed. If necessary, adjust
the bit stop. Adjust the speed of the machine using the regulating wheel
on the operating switch (6). The more the operating switch (6) is pressed
in, the faster the drill rota tes. Set the direction switch (4) to the desired
direction of motion. Never alter the position of the hammer drilling switch
(3) or the direction switch (4) when the machine is switched on. The
machine is switched on by pressing the operating switch (6). When
the operating switch (6) is released, the machine stops. If you would
like to use continuous operation press the locking button (5) while the
operating switch (6) is pressed. In order to switch off the machine during
continuous operation, press the operating switch (6) again and then let
it go. Do not touch the drill chuck (1) while the machine is switched on.
DRILLING TIPS
- Always insert the correct size and type of drill or screwdriver.
- Set the machine to the correct speed.
- Always hold the machine tightly by the handle and second handle (2).
- When drilling wood and metal, set the hammer-drilling switch (3) to drilling.
- When drilling masonry, set the Hammer-drilling switch (3) to hammer drilling.
- When using the machine as a screwdriver, set the Hammer-drilling
switch (3) to drilling.
- Set the direction switch (4) to the correct direction.
- Never change the direction of motion when the machine is switched on.
IMPACT DRILL
8
CARE OF THE TOOLS
.OVERLOAD
Never use excessive force when drilling. Too much pressure reduces
the speed of the machine, and the required power is greatly reduced.
This may result in overload, which can damage the motor of the drilling
machine. When the drilling machine becomes too hot, allow it to run for
two minutes without a load and then interrupt working for a short time.
Clean the drilling machine with a clean cloth and a brush. Ensure that
the ventilation slits are not blocked.
WARNING!
Always use the additional grips which come with the appliance. Losing
control of the appliance may result in injuries.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Ronix 2250 User manual

Category
Power tools
Type
User manual

Ronix 2250 is a versatile power tool designed for a range of drilling applications in wood, steel, and concrete. It features a powerful 850W motor that delivers up to 3000RPM, ensuring efficient and precise drilling. The variable speed control allows you to adjust the speed according to the material and task, while the keyed chuck provides a secure hold on drill bits.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI