2. Martec
  3. MLOO34512
MLOO34512

Martec MLOO34512 Operating instructions

  • Hello, I'm your chat assistant. I've reviewed the provided document, which is the installation instructions for MARTEC ORBIT tricolour LED ceiling lights. This document includes important safety warnings, installation steps, and technical specifications for the MLOO34512, MLOO34518, MLOO34524, and MLOO34528 models. I'm ready to answer your questions about these light fixtures and their installation.
  • Can these lights be used outdoors?
    What is the IP rating of these lights?
    What are the available color temperatures?
    Is the LED modular replaceable?
ORBIT
TRICOLOUR LED CEILING LIGHT 12W,18W,24W,28W
Model No's : MLOO34512, MLOO34518, MLOO34524,MLOO34528
IP20 INDOOR USE ONLY
Technical specifications:
Input Voltage AC200-240V 50Hz
Wattage:12W,18W,24W,28W
CRI >80
Metal Housing and acrylic lens cover
Material :Polycarbonate
LED type :LED Modular ( non replaceable)
Beam Angle 120°
Tricolour Temperature 3000K,4000K,5000K
Lifetime 35,000hrs
IP Rating IP20
Protection: Class 1 Requires earth connection.
12 Watt
3000K - 900lm
4000K-1000lm
5000K-950Im
18 Watt
3000K-1400Im
4000K-1600lm
5000K-1500Im
24 Watt
3000K - 1700lm
4000K-1900lm
5000K-1800Im
28 Watt
3000K-2200Im
4000K-2400lm
5000K-2300Im
Tricolour /Lumens Model
Installation diagram :
B
A
C
•Not designed for outdoor use.( Indoor use only)
•This fitting must be earthed.
•Failure to follow these instructions will result in breakages
and will invalidate the warranty on this product
•For safety reasons, any installation, repair or inspection must
be done by authorized personnel, in accordance with
Australian Standards
If product is functioning irregularly, please turn off the power
and contact Martec Pty Ltd.
•Do not perform unauthorized modification to this light fixture
1. Disconnect power
2. Remove diffuser ‘A’ by twisting anticlockwise.
3. Drill required holes in the ceiling using the holes in the
fixture ‘B’ as a template.
4. Use screws and suitable fixture system to secure the fixture
to the ceiling ensuring that the mains wire is through the
entry hole ‘C’
5. Connect the Active (L), Neutral (N) and Earth according to the
markings on the terminal block.
6. Select Colour Temperature by toggling the switch on driver.
7. Re-attach diffuser ‘A’
8. Restore power
Installation Instructions:
Warning:
Page1
2
YEAR
Replacement
Warranty
LED Modular
THIS CEILING LED LIGHT MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN, AND AN ELECTRICAL SAFETY
CERTIFICATE MUST BE ISSUED ON COMPLETION OF THE INSTALLATION.
www.martecaustralia.com.au | 02 8778 7500 | [email protected] Page 2
Warranty :
Warranty does not include damage or loss arising from incorrect installation, operation or maintenance of this product, damage
caused through modification, incorrect installation, service by unqualified or unauthorised personnel or lack of regular maintenance
and cleaning. Proof of installation by qualified personnel may be required, e.g.. Electrical Safety Certificate. Proof of purchase must
be supplied with all warranty claims.
This warranty is provided in addition to any other rights and remedies of the customer under any law. In applications not intended
for household, personal or domestic use, liability is limited to replacement or reimbursement of product only.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major failure.
Any claim under this replacement warranty must be made within 2 years of the date of purchase of the product.
For all warranty information please refer to the Martec website.
www.martecaustralia.com.au
4
/