Angelo Decor AD93211 Operating instructions

Brand: Angelo Decor

Model: AD93211

Type: Operating instructions

Below you will find brief information for AD93211. This document provides instructions for setting up your Angelo Decor fountain. It guides you through unpacking, arranging parts, connecting tubing, positioning the pump and baffle plate, attaching the orb, and adding rocks. It also includes instructions on filling with water and plugging in.

Below you will find brief information for AD93211. This document provides instructions for setting up your Angelo Decor fountain. It guides you through unpacking, arranging parts, connecting tubing, positioning the pump and baffle plate, attaching the orb, and adding rocks. It also includes instructions on filling with water and plugging in.

Thank you for buyin

g

an An

g

elo Decor Fountain!

We hope you will find these instructions helpful in settin

g

up your fountain. If you need mor

e

information to properly care for your fountain, please DO NOT return the unit to place of purchase.

Please visit our web site, www.an

g

elodecor.com, for assistance and warranty information.

First unpack carton carefully, arran

g

in

g

parts safely in your workin

g

area

.

Pump is pre installed. Attach tubing, Sit pump at bottom, slide tube Rest baffle plate on notches, with

note flow control to adjust. through baffle plate as shown. tube directly above pump.

Proper plate and tube placement

A

ttach tube to metal pipe Tube should sit securely on pipe

Place orb on notch, be sure hose does not bend Cord goes in bottom groove

A

dd Included Rocks!

Now simply fill with clean water and plug into a grounded GFCI outlet

We recommend keepin

g

bowl 3/4 full of water to avoid pump burnout.

1

Angelo Decor AD93211 Operating instructions

Brand: Angelo Decor

Model: AD93211

Type: Operating instructions

Below you will find brief information for AD93211. This document provides instructions for setting up your Angelo Decor fountain. It guides you through unpacking, arranging parts, connecting tubing, positioning the pump and baffle plate, attaching the orb, and adding rocks. It also includes instructions on filling with water and plugging in.

Download PDF

Related papers

Other documents