Angelo Decor AD97030 Operating instructions

Angelo Decor
Brand
Angelo Decor
Model
AD97030
Type
Operating instructions
Riga Fountain AD97030
Thank you for buying an Angelo Decor Fountain!
We hope you will find these instructions helpful in setting up your fountain.
If
y
ou have an
y
issues with this item, please DO NOT return the unit to place of purchase.
Please visit our web site, www.an
g
elodecor.com, for assistance and warrant
y
information.
First unpack carton carefully, arranging parts safely in your working area.
Install the optional "clicking"
bamboo feature by placing
it on the holder as shown.
Align the top, then lower
and slide it into place.
Feed the tubing from the
top piece down the
opening in the top of the
fountain body.
Assemble all parts in your
work area.
Now simply fill with clean water and plug into a grounded GFCI outlet
We recommend keeping bowl 3/4 full of water to avoid pump burnout.
Product must be properly stored for winter.
Install the optional "clicking"
bamboo feature by placing
it on the holder as shown.
Align the top, then lower
and slide it into place.
Locate the tubing from inside
the fountain and connect it to
the pump.
Feed the tubing from the
top piece down the
opening in the top of the
fountain body.
The pump is preset to 75%
strength. If splash is a
concern, adjust as needed.
Place the pump flat
inside the reservoir.
Align the pump cord
with the groove and
slide the pump access
door in place.
Assemble all parts in your
work area.
The final assembly should look
like this
  • Page 1 1

Angelo Decor AD97030 Operating instructions

Angelo Decor
Brand
Angelo Decor
Model
AD97030
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents