Angelo Decor AD95220 Operating instructions

Brand: Angelo Decor

Model: AD95220

Type: Operating instructions

Thank you for buying an Angelo Décor Fountain!

We hope you will find these instructions helpful in setting up your fountain.

If you have any issues with this item, please DO NOT return the unit to place of purchase.

Please visit our web site, www.angelodecor.com, for assistance and warranty information.

First unpack carton carefully, arranging parts safely in your working area.

Unpack and arrange all

parts. Feed the tubing attached to

the top piece through the

opening as shown above.

Set the top section of the

bamboo into place by lowering

and turning to lock in place.

Now simply fill with clean water and plu

into a

rounded GFCI outle

Final assembly should

look like this

Unpack and arrange all

parts. Feed the tubing attached to

the top piece through the

opening as shown above.

Set the top section of the

bamboo into place by lowering

and turning to lock in place.

Set the bamboo tray into place as shown above left. Carefully set

the "tipping" bamboo place into the holder as shown above right.

You may need to do some slight adjusting in this step to get the

tipping rhythm just right.

Place the bamboo mallet in

the bottom bowl to catch the

final spill. It will help to

control any potential

splashing.

Connect the tubing to the

pump. Adjust the pump to

full strength. If splash is a

concern, adjust the flow

control as needed.

Place the pump inside the

reservoir being certain it is

fully submersed, sitting flat

and the tubing is not

kinked.

Install the pump

access door by

sliding it into

place.

Angelo Decor AD95220 Operating instructions

Angelo Decor AD95220 Operating instructions

Angelo Decor AD95220 Operating instructions

Related papers

Other documents