2. Zephyr
  3. ZRC-00RG
ZRC-00RG

Zephyr ZRC-00RG, ZRG-E30BS, ZRGE30BS, ZRGM90BS User manual

  • Hello! I've reviewed the user manual for ZEPHYR charcoal filters, including models ZRC-00RG, ZRG-E30AS, ZRG-M90AS, ZRG-E30BS, and ZRG-M90BS. This document provides instructions on how to install these filters using rubber clips or magnets. It also details the removal of foam prior to filter bracket installation and procedures for enabling the filter replacement indicator. I'm ready to answer any questions you have regarding the installation process or other aspects of these filters.
  • How are the charcoal filters secured?
    What should be removed before installing the charcoal filter brackets?
    What should I do after installing the new charcoal filters?
12
7/8”
(22.5mm)
10 5/8”
(270mm)
INCLUDED MATERIALS
JUL22.0301
Remove all black foam from filter opening
before installing the charcoal filter brackets.
(2) #6 x 1” (4)
Place charcoal filters to back side of baffle
filters. Secure charcoal filters in place by
rubber clips. Depending on filter design
secure top and bottom of charcoal filters by
either rubber clips or magnets.
Magnet
Magnet
Clip
Clip
(28)
ZRC-00RG
For use with models: ZRG-E30AS , ZRG-M90AS , ZRG-E30BS , ZRG-M90BS
2277 Harbor Bay Pkwy
Alameda, CA 94502
1.888.880.8368
3
Follow instructions in hood
manual to enable the
“replace charcoal filter”
indicator on the hood
controls.
/