800-422-2952 www.babylock.com
When sewing with thick, lofty or high-pile fabrics like eece,
sherpa or faux fur, it’s easy for the fabric to get caught by the
needle. This foot is designed with an inclined toe that gradually
attens the fabric as it feeds through your machine, preventing
the fabric from catching.
INSTRUCTIONS:
1. Raise presser foot and raise the needle to the highest position.
2. Loosen and remove screw using the screwdriver included with
your machine.
3. Attach the Heavy Weight Foot and tighten the screw.
4. Select a straight stitch. Sew.
Heavy Weight Foot
(BLQP-HW)
Instructions
Baby Lock
Sewing Accessories
LNIS-BLQP-HW
