GE Appliances UVD6361SPSS Installation guide
- Type
- Installation guide
GE Appliances UVD6361SPSS is a 36" telescopic downdraft system designed to remove smoke, grease, odors, and moisture from the air while cooking. It features a powerful 500 CFM venting system with adjustable fan speed and removable, dishwasher-safe aluminum mesh grease filters for easy cleanup. The system can be installed with either a right or left discharge direction and retracts into the countertop when not in use.
GE Appliances UVD6361SPSS is a 36" telescopic downdraft system designed to remove smoke, grease, odors, and moisture from the air while cooking. It features a powerful 500 CFM venting system with adjustable fan speed and removable, dishwasher-safe aluminum mesh grease filters for easy cleanup. The system can be installed with either a right or left discharge direction and retracts into the countertop when not in use.
UVD6361SP
Universal 36" Telescopic Downdraft System
For answers to your Monogram, Café™, GE Profile™ or GE Appliances
product questions, visit our website at geappliances.com or call
GE Answer Center® Service, 800.626.2000.
Specification Revised 8/23
NOTE: Telescopic downdraft vents are not
recommended to be installed with cooktops
that are flush mounted.
Approved for use with the following Monogram,
GE Profile™ Series and GE® Series cooktops–36"
electric models, 36" gas-sealed burner models
and 36" induction models.
NOT APPROVED FOR USE WITH STANDARD
BURNER GAS COOKTOPS.
NOTE: The countertop must be at least 26" deep
witha flat surface area of 23-1/2" or more, front to
back.In addition, other clearances to the front edge
of thecountertop must be considered.
NOTE: Dimensions shown are for reference only.
Before cutting out countertop, refer to instructions
packed with downdraft and cooktop.
NOTE: Installation on cabinets/countertops against
the wall will not be possible in most applications.
Against the wall installations are limited to
dimension requirements. Refer to installation
instructions packed with product for further details.
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
2.0
4.0
2.4
2.0
7.0
17.6
29.5
36.5
3.5
0.4
22 1/4
36
32 1/4
Open Chimney View
UVD6361SPSS, UVD6361DPBB
UVD6361SP
Universal 36" Telescopic Downdraft System
Specification Revised 8/23
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
DUCT PIECES EQUIVALENT LENGTH* DUCT PIECES EQUIVALENT LENGTH*
1 ft. (per foot length)
1 ft. (per foot length)
12 ft.
7 ft.
14 ft.
12 ft.
33 ft.
2 ft.
2 ft.
4 ft.
4 ft.
24 ft.
24 ft.
33 ft.
SHOULD NOT EXCEED 100 EQUIVALENT FT.
* Equivalent length of duct pieces is based
on actualtest conducted by GE Evaluation
Engineering andreflects requirements for
good venting performance.
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1
/4" X 10"
T
O 6" ROUND
T
RANSITION
9
0° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUN
D
W
ALL CAP
W
ITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1
/4" X 10"
W
ALL CAP
W
ITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
6" ROUND
STRAIGHT
3-1/4" X 10"
STRAIGHT
3-1/4" X 10"
90° ELBOW
3-1/4" X 10"
45° ELBOW
3-1/4" X 10"
45° ELBOW
6"
90° ELBOW
6"
45° ELBOW
3-1/4" X 10"
TO 6" ROUND
TRANSITION
6" ROUND
TO 3-1/4 X 10"
TRANSITION
90° ELBOW
6" ROUND
ROOF CAP
3-1/4" X 10"
WALL CAP
WITH DAMPER
6" ROUND
ROOF VENT
3-1/4" X 10"
TO 6" ROUND
TRANSITION
90° ELBOW
6" ROUND
WALL CAP
WITH DAMPER
6" ROUND
TO 3-1/4 X 10"
TRANSITION
VENTING DUCT INFORMATION
PLAN THE DUCTWORK
1. This downdraft blower system is designed for use with
3-1/4" x 10" ductwork (can be transitioned to 6" round).
Two dierent discharge directions are available with side-
to-side adjustment for the accurate alignment of ductwork.
2. For best performance: choose the ducting option which
allows the shortest length of ductwork and a minimum
number of elbows and transitions. Check location of floor
joists, wall joists, wall studs, electrical wiring or plumbing
for possible interference.
STEPS TO DETERMINE FLEXIBLE DUCTING’S
EQUIVALENT LENGTH
1. Measure the actual amount of oset (Maximum 3"
recommended). The eect upon airflow is dependent
uponthe amount of oset.
2. Calculate the equivalent ducting allowances using:
(__in. oset) x (14 ft. per inch) =__ft. equivalent length.
3. Total equivalent length of ducting should not exceed
the maximum recommendation of 100 feet for optional
venting performance.
Left discharge
(as shipped)
Right
discharge
For answers to your Monogram, Café™, GE Profile™ or GE Appliances
product questions, visit our website at geappliances.com or call
GE Answer Center® Service, 800.626.2000.
UVD6361SP
Universal 36" Telescopic Downdraft System
Specification Revised 8/23
FEATURES AND BENEFITS
500 CFM – Make sure everyone is focused only on your food with
a 500-CFM venting system that removes smoke, grease, odors and
moisture from the air.
Adjustable fan speed – Adjust your vents to match your cooking
techniques with infinite fan control that removes grease, odors
and moisture.
Grease filters – Keep your clean-up to a minimum with a removable
grease filter that helps eliminate hand scrubbing.
Aluminum mesh filters – Easy to remove, dishwasher safe.
Hides into countertop – Raises over cooktop surface and retracts
when not in use.
Model UVD6361SPSS – Stainless Steel
JVB36/30DK
-
1
-
2
-
3
GE Appliances UVD6361SPSS Installation guide
- Type
- Installation guide
GE Appliances UVD6361SPSS is a 36" telescopic downdraft system designed to remove smoke, grease, odors, and moisture from the air while cooking. It features a powerful 500 CFM venting system with adjustable fan speed and removable, dishwasher-safe aluminum mesh grease filters for easy cleanup. The system can be installed with either a right or left discharge direction and retracts into the countertop when not in use.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI