User Guide
Product Description
The intelligent universal remote control is integrated in a large
number of infrared code libraries, which can be used to add various
infrared remote controls through this device. To realize intelligent
application scenarios
Pairing Idicator
Reset Button Power Plug
Preparation for use
Mobile phone
connection Wi-Fi Smart phone Wi-Fi Wireless
Router Smart Remote Controller
Wi-Fi
Make sure both the mobile phone and the smart remote controller keep the same
Wi-Fi network to ensure the effective connection between the mobile phone
and the smart remote controller
Install the “Smart Life”APP
Step A .Find out “Smart Life”app in Apple app store, Google Play, or scan the
QR code bellow and install it.
The free app”Smart Life” is compatible with mobile devices the support IOS8.0
above, Android 4.4 above
Step B .Enter the register interface, input the email address/phone number for
getting the verification code to register an account. Please just login if you
already have a Smart Life account.
Access settings
Connect the smart remote controller to the power supply, and connect to the
family 2.4GHz band router through the network cable;
Confirm that the network indicator (green light) is always on (if the indicator is
in other states, long press the "reset button" until the green light is on)
Make sure that the mobile phone is connected to the home 2.4GHz band router.
At this time, the mobile phone and the remote controller are in the same LAN
Open the "My Home" page of the “smart life ”app and click the add button "+" in
the upper right corner of the page;
Click "Gateway and other" on the left side of the page, and select the “universal
remote controller”according to the icon;
Follow the prompts to operate the device to connect to the network, after adding it,
you can find the device in the "My Home" list
Reset Button
Product specification
Packing list
Smart Remote Controller X 1
Data cable X 1
User Manual X 1
Screw X 3
Screw plug X 3
Fixed bracket X 1
Product name
Model
Input
Operation temperature
Working humidity
Product Size
Wireless connection
Smart Remote Controller
TI01
5V 1A
-10 C~55 C
10%-90%RH(No condensation)
¢90X20mm
Wi-Fi
Smart Remote Controller
Wi-Fi
FCC NOTE：
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference received, including interference that
may cause undesired operation .
The manufacturer is not responsible for any radio or tv interference caused by
unauthorized modifications or change to this equipment.
Such modifications or change could void the user's authority to operate the
equipment. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interferencewill not occur in a particular
installation. If this equipment doescause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
To maintain compliance with FCC's RF exposure guidelines, this
equipment should be installed and operated with a minimum
distance of 20cm between the radiator and your body.
