2. Home
  3. Domestic appliances
  4. Climate control
  5. Split-system air conditioners
  6. ACiQ
  7. 24AHB Next Gen Ducted Heat Pump System
24AHB Next Gen Ducted Heat Pump System

ACiQ 24AHB Next Gen Ducted Heat Pump System, -24AHB Next Gen Ducted Heat Pump System User guide

  • Hello! I am an AI chatbot trained to assist you with the ACiQ 24AHB Next Gen Ducted Heat Pump System User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
This QuickStart guide covers how to connect the thermostat to control your system. It is not meant to replace the
entire installation manual, and will not cover high voltage wiring, or refrigerant connections.
Thank you for purchasing a Next Gen Heat Pump system from ACiQ.
This system gives you the benets of a variable, inverter heat pump
condenser, combined with a smart air handler with a variable blower.
ACiQ-24AHB / ACiQ-24-HPB
ACiQ-36AHB / ACiQ-36-HPB
ACiQ-48AHB / ACiQ-48-HPB
Quick Start Guide
ACiQ Next Gen
Ducted Heat Pump System
Option 1 - Connecting the provided thermostat (recommended)
ACiQ’s provided thermostat is designed to operate the system at maximum eciency with full programmability. Refer
to the thermostat user’s manual for detailed instructions.
Using the supplied thermostat with your ACiQ Heat Pump is strongly recommended. Benets include:
• Simplest installation
• Works with the handheld remote
• Display Error Messages onscreen
• Maximum Comfort and Energy Savings
Indoor Unit
DIP Switch
Outdoor Unit
DIP Switch
ON ON
Factory
Default
Setting
1st board
(Front)
Thermostat
HAHB
2nd board
(Back)
Indoor Unit
Option 2 - Connecting a 24v Thermostat with communication wire connected
You can use any 24v thermostat. Select your thermostat prole from the options below and connect the
communication wire between the consenser and air handler as shown. Set the dip swithces as shown below.
Outdoor Unit
Indoor Unit
Communication
wire connection
Indoor Unit
DIP Switch
Outdoor Unit
DIP Switch
ON ON
THERMOSTAT CONNECTION (SELECT ONE):
Set jumpers as shown to
activate electric strip heat
S4-2 DIP switch o
Wiring for 3H and 2C thermostatWiring for 3H and 1C thermostat
Option 2 cont.
Wiring for 3H and 2C thermostat Wiring for 4H and 2C thermostat
S4-2 DIP switch o
Set jumpers as shown to
activate electric strip heat
S4-1 DIP switch o
Set jumpers as shown to activate
aux control (zone board, IAQ,
dehumidier, etc.)
S4-2 DIP switch o
Set jumpers as shown to
activate electric strip heat
S4-1 DIP switch o
Set jumpers as shown to activate
aux control (zone board, IAQ,
dehumidier, etc.)
S4-2 DIP switch o
Set jumpers as shown to
activate electric strip heat
S4-1 DIP switch o
Set jumpers as shown to activate
aux control (zone board, IAQ,
dehumidier, etc.)
S4-2 DIP switch o
Set jumpers as shown to
activate electric strip heat
S4-1 DIP switch o
Set jumpers as shown to activate
aux control (zone board, IAQ,
dehumidier, etc.)
Option 3 - Using a 24v thermostat without communication wire connected
You can use any 24v thermostat without connecting communication wire. You must connect the thermostat at both
indoor and outdoor terminal blocks as shown. Set the dip switches as shown.
Wiring for 3H and 1C thermostat
S4-2 DIP switch o
Set jumpers as shown to
activate electric strip heat
S4-1 DIP switch o
Set jumpers as shown to activate
aux control (zone board, IAQ,
dehumidier, etc.)
Option 3 cont.
Wiring for 3H and 2C thermostat
S4-2 DIP switch o
Set jumpers as shown to
activate electric strip heat
S4-1 DIP switch o
Set jumpers as shown to activate
aux control (zone board, IAQ,
dehumidier, etc.)
Wiring for 3H and 2C thermostat
S4-2 DIP switch o
Set jumpers as shown to
activate electric strip heat
S4-1 DIP switch o
Set jumpers as shown to activate
aux control (zone board, IAQ,
dehumidier, etc.)
Wiring for 4H and 2C thermostat
S4-2 DIP switch o
Set jumpers as shown to
activate electric strip heat
S4-1 DIP switch o
Set jumpers as shown to activate
aux control (zone board, IAQ,
dehumidier, etc.)
/