Falcon Electronics FEMS901D-1 User manual

Brand: Falcon Electronics

Model: FEMS901D-1

Type: User manual

Falcon Electronics FEMS901D-1 is a digital wireless heavy-duty backup camera system with a 7-inch LCD monitor and up to four camera options. It utilizes 2.4G wireless video and audio transmission, providing a stable and interference-free connection. The system features a 100-meter transmission range in open areas, making it suitable for large vehicles or trailers. It includes a waterproof camera with a 100-degree viewing angle and night vision capability, ensuring clear visibility in various conditions.

PB 1

INSTRUCTION

MANUAL

Digital Wireless

Heavy-Duty Back-Up

Camera

2-3-4 Camera options

with 7” LCD Monitor

ANNOUNCENMETS ...........................................................................................................................................1

1. FUNCTIONS & SPECIFICATIONS ............................................................................................................2

2. APPLICATION ..................................................................................................................................................3

3. PRODUCT INTRODUCTION ..................................................................................................................... 3

REMOTE CONTROL ..........................................................................................................................................7

ACCESSORY .......................................................................................................................................................... 7

CONTENTS

ANNOUNCEMENTS

For your safety, do not watch video or control the monitor when driving.

Drivers/operators: please do not disassemble the product housing.

WARNING - When installing this product, please install it in the position which

is allowed by the law, we do not take any legal liability for the product installed

illegally.

WARNING - When in cold weather, the monitor may show dark spots when

starting up, once it powers on and warms up after power-on, the screen will be

back to normal.

1. FUNCTIONS & SPECIFICATIONS

Monitor - 4 Ways Quad System

• 7 Inch Digital Panel A+

• Screen Ratio: 16:9

• Resolution: 800*RGB*480

• Button function: 7 mechanical buttons

• Remote control function: 7 keys of remote control

• Wireless video input: 4 ways video input

• Wireless audio input: 1-way audio input

• Digital wireless encryption technology to code connection, have strong anti-interference capacity

• 2.4G wireless video signal input 14 signal frequency points (2412MHz~2484MHz)

• 2.4G wireless transmitter: The distance can reach 100M in the open area

• Power supply: DC12V~24V

• Power Consumption: 5W

• Working temperature: 0° C ~ 60° C

• Storage temperature: -10° C ~ 70° C

• Size: 180×121×24mm

Camera

• Model: AC-301W

• Image sensor: 1/4” CMOS OV7725

• Resolution: 640*480 VGA

• Image View angle: 100° degrees

• Night Vision distance: 3m

• With in-built high sensitive microphone(optional)

• Waterproof: IP67

• 2.4G wireless transmitter: The distance can reach 100M in the open area

• Power supply: DC12V ~ 24V

• Power Consumption: 3W

• Working temperature: 0° C ~ 60° C

• Storage temperature: -10° C ~ 70° C

• Size: 86.5mm*74.5mm*77mm

2 3

2. APPLICATION

This product use high resolution LCD screen and 2.4G digital wireless technology, it uses

embedded processor and embedded operation system, integrates the newest technol-

ogies in IT areas, like the compression/decompression technology in audio & video, the

shockproof technology in structure. It is easy to install, simple connections, no radiation,

low power consumption, no ﬂicker, colorful and real image, universal for any vehicles.

3. PRODUCT INTRODUCTION

7” LCD Monitor

1. 2.4G antenna

2. Monitor Screen

3. LOGO

4. MENU: Open the menu or quit the menu

5. Brightness decrease

6. Brightness increase

7. Power: Long-time press for turning on/off the monitor

8. Volume decrease

9. Volume increase

10. MODE

CAMERA

WIRELESS CAMERA DIAGRAM

1. 2.4G antenna

2. U-shape metal bracket

3. Power supply connector: DC12-24V

4. Pairing switch

Operation

1. Long-time push for starting up, short-time push the power button to be standby mode

2. Pairing setting:

Push “MENU “button or the “MENU” key of remote control open the menu interface push “MODE” button

or the “MODE” key of remote control switch to pairing option. Push or the up/down key of

remote control to switch other options, push “MODE” again to open pairing setting at the same time, push

the red pairing switch on camera, it takes 2-5 seconds to show “pairing” which means pairing successfully or

it will show “over time” pairing failed. Start re-pairing process. After pairing successfully, push “MENU” button

to quit the current setting.

4 5

2. TIME SETTING:

On the menu interface, push “ ” button or “ ” key of remote control, switch to “time setting

“option. Push MODE button or MODE key of remote control enter “year” “month” “day” “hour” “minute

“setting.

Push button or key of remote control to increase and decrease adjusting.

Push button or button key of remote control to setting each part after ﬁnishing

setting, then push MODE button or MODE key of remote control to save the time setting.

Push “MENU” to quit the current setting.

2. LANGUAGE SETTING:

On the menu interface, push “ ” button or “ ” key of remote control, switch to Language

option, push MODE button or MODE key on remote control to conﬁrm. Push button

or on remote control to change language. Push MODE button or MODE key on remote control to

reserve language setting, then MENU to quit.

4. RESTORE THE DEFAULT SETTING

On the menu interface, push “ ” button or “ ” key of remote control, switch to Restore the default

setting option. Push MODE key on the remote control to conﬁrm.

Push button or “ ” key on remote control. To conﬁrm push MODE key on remote con-

trol to conﬁrm settings. Push MENU when done.

5. When starting up, it shows the blue light, when turning off, it shows the red light.

6. CONNECTIONS

1. LCD Monitor

2. Camera

3. The camera pairing switch

4. The power supply connector of camera: DC12-24V

5. The power supply connector monitor: DC12-24V

6. Reversing trigger line

6 7

REMOTE CONTROL

1. POWER: Turn on/off monitor

2. MODE: conﬁrm menu/ switch image

3. Brightness decrease: To adjust left

4. MENU: open the menu or quit the menu

5. Brightness decrease: To adjust left

6. Volume increase: To adjust up

7. Volume decrease: To adjust down

ACCESSORY

1. Power cable 5PCS

2. Remote control 1PCS

3. User Manual 1PCS

4. Hex wrench 4MM 1PCS 3MM 1PCS 4.2.4G antenna *5PCS

5. 3m extension 2.4G antenna *1PCS

6. 2.4G wireless camera*4PCS

Falcon Electronics FEMS901D-1 User manual

Falcon Electronics FEMS901D-1 User manual

Falcon Electronics FEMS901D-1 User manual

Other documents