INKEE GC30 User guide

*注：本手册以双色温为例说明！

上

1. When using this product for the ﬁrst time, please exit the transportation mode ﬁrst:

Rotate the control ring to activate the screen, and the transportation mode interface will

be displayed ①， Next, you need to continuously rotate the control ring clockwise several

times ② until the progress bar at the top of the screen is full③. Enter the main menu and

successfully exit the transport mode.④

Note: This manual uses Bi-color as an example!

Bowen Mount

Transformable adapter

Universal Control Ring

Charging Interface

Display Screen

Standard Reﬂector

2. Enter the transportation mode: When the machine is locked①, continuously rotate the

control ring ② counterclockwise until the green progress bar at the top of the screen is full③,

and the green airplane icon appears④, which means entering the transportation mode.

Turn half a block clockwise and

hold on for 2 seconds to enter

the color temperature adjustment

Turn half a block counterclockwise without letting

go and hold on for 2 seconds to enter the mode

adjustment(rotate the control ring while

maintaining this interface to select the mode)