Home » MAXIM » MAXIM 58740 Wafer 22 Inch RD LED Surface Mount 4000K Installation Guide

MAXIM 58740 Wafer 22 Inch RD LED Surface Mount 4000K Installation Guide

Contents

1 Before Getting Started

2 Contents

3 Lamp Care Instructions

4 Installation Instructions

5 Cleaning &

inside.

Carefully remove all packaging materials and retain for future use.

Keep all hardware parts and packaging out of reach of small children.

Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.

Ensure that you have all required contents for complete assembly.

Take care when lifting. Assemble the product in close proximity to where you intend to position the item.

Do not over tighten the screws and bolts as this may damage the threads.

Do not let children play with this product.

MAXIM 58740 Wafer 22 Inch RD LED Surface Mount 4000K

A X1

B X1

C X2

D X3

E X8

F X8

G X2

H X1

Lamp Care Instructions

1. Carefully read through the instruction sheet before assembly and using the product.

grounding connection. Fix the driver on the junction box.

2. Fix the mounting plate to the driver, align with the slot, push upward and rotate to install.

3. Screw the installation plate on the ceiling by using the screws and expansion anchor bolts (No need in Wooden

Board).

4. Install the fixture on the mounting plate, align with the clamping position, push upward and rotate to install.

Cleaning & Maintenance

On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.

For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood

polish.

Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.