Enelion Electric Car Charging Cable User manual
- Type
- User manual
TOOLS REQUIRED TO MOUNT THE
UNIVERSAL HOOK
ON THE WALL:
• Drill with masonry drill bit 8 mm
• Electric screwdriver with PZ2 bit
TOOLS REQUIRED TO MOUNT
THE UNIVERSAL HOOK
TO A METAL POLE:
• Electric screwdriver with PH2 bit
INSTALLATION INSTRUCTIONS
FOR UNIVERSAL HOOK
FOR ELECTRIC CAR
CHARGING CABLE
12
SET COMPONENTS:
• Universal hook - 1 pc.
• Self-drilling screws PH2- 4 pcs.
• Plastic expansion wall plugs with PZ2
screws - 4 pcs.
• Screw plugs - 4 pcs.
PH2 PZ2
x4 x4 x4
WALL MOUNTING METHOD:
• Mark the locations of the dowel
holes by using the hook as a
template.
• Drill 4 holes 8 mm in diameter and
60 mm deep.
• Place the wall plugs in the holes.
• Place the bottom part of the plugs
on the screws.
• Screw the hook to the post with the
screws.
• Cover the heads of the screws with
the upper part of the plugs.
METAL POLE MOUNTING METHOD:
• Mark the screw locations on the surface
of the pole.
• Screw the hook to the post with the
self-drilling screws.
12
-
1
