the freedom of sound...
be ree
To pair with a Bluetooth device, follow these steps:
1. With the Bluetooth device and the BeFree speaker both turned on, press and hold the Bluetooth
button on the speaker for three seconds to make the speaker discoverable. The Bluetooth indicator
light will blink to show the speaker is in discoverable mode
2. Set your Bluetooth device to "Discoverable." This will allow your device to discover the BeFree
speaker
3. On your device, locate the Bluetooth device list. Select "Befreesound" from the list
4. If your device asks for a passkey, enter digits 0000 and press OK. Some devices also ask you to accept
the connection. Your Bluetooth device indicates when pairing is complete. The Befree speaker indicates
pairing is complete when the Bluetooth indicator stops blinking on and o and remains on
Model: BFS-6700
INSTRUCTION MANUAL
Limited Warranty Information
http://www.befreesound.com
info@befreesound.com
Party Lights Triple 10 Inch Subwoofers
Bluetooth Portable Speaker with USB/ SD Input,
FM Radio, Remote Control and Microphone
Included in the package:
(Batteries not included)
Front Panel Reference Guide
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15
1. Battery Charge Indicator Light
- Light which turns on if the battery is running low on charge. If so, the speaker needs to be
plugged in an electrical outlet for the battery to be recharged
2. MIC VOL
- Knob which controls the volume for the Microphone
3. ECHO VOL
- Knob which controls the sound echo for the Microphone
4. MIC/PRIO
- The button which switched from wireless microphone to the wired Microphone
5. Previous Song Selector
- The button which chooses the previous song on a playlist
6. Play and Pause
- A button used to play and pause the music from various source connected to the machine
7. Next Song Selector
- The button which chooses the next song on a playlist
8. MODE
- The button which changes between the sources connected (Bluetooth, USB, Aux) to the device
9. Bluetooth, USB, Aux light indicator
- Indicates which device in connected based on the light ashing speed.
10. VOLUME
- Knob which controls the increase and decrease of volume
11. L/RIGHT EQUALIZER
- Equalizer control for sound control
12. MIC INPUT
- Wired microphone input
13. DC12V INPUT
- Optional charging input
14. TF/USB CARD
- Input option for USB or Mini SD Card
15. AUDIO INPUT
- Wiled audio input option
1. AC INPUT
- Power cord input
2. POWER
- Device power button
3. LED POWER
- Light power button
1
2
3
Rear Panel Reference Guide
12
5
8
11
9
3
6
10
7
4
12 13
14
1. Power Button
2. MODE: Changes Play Source
3. Previous Song Selector
4. Play and Pause
5. Next Song Selector
6. RECOR: Record button
7. VOL+: Increase Volume
8. REPLAY: Playback
9. Mute Button
10. CH-/EQ: Pre-set equalizer setting(in USB,Mini SD mode only)
11. RPT/DEL
12. 0:Digital input selection (in USB,Mini SD mode only)
13. INT/ALL/SCAN: in USB,Mini SD mode only
14. VOL-: Decrease Volume
Remote Control Reference Guide
/