2. Ten Tronics
  3. Bluetooth Adapter
Bluetooth Adapter

Ten Tronics Bluetooth Adapter User manual

  • Hello! I have analyzed the user manual for the Music Receiver CSR Bluetooth v5.0. This document provides details on its Bluetooth v5.0 capabilities, audio outputs, and LED status indicators. I am ready to answer any questions you may have about this device and its functionality.
  • How do I boot or turn off the device?
    How do I start the first pairing?
    What is the pairing timeout limit?
    What should i do if pairing timeout?
In-Wall CSR Bluetooth v5.0 Music Receiver
Specifications & Features
Audio Inputs :Bluetooth receiver or stereo audio line level .
Audio source select: Source is auto switch, the priority is BT first when playing.
Audio output: Stereo audio phone jack or 3-pin Screw terminal.
Power input(5VDC): Power jack or 3-pin Screw terminal.
Stereo audio output: For connection to any speaker system.
Bluetooth version: v5.0.
Bluetooth receive Distance:10 Meters.
Power source:5VDC/1A
Bluetooth Blue LED Status :
Pairing mode: 1s on/off(0.5ms/0.5ms) flash 1 times
Linked mode: Always on
Connectable mode: 5s on/off(0.5ms/4.5ms) flash 1 times
How about use button to pairing :
§Press button 3 seconds to boot, press button 3 seconds to off.
§The first pairing, hold down button 5 seconds to make the Bluetooth pairing boot.
§The pairing timeout limit is 90 seconds.
§If pairing timeout, you need hold down button 1 second to re-pairing.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from thatto which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with
any other antenna or transmitter.
RF Exposure Statement:
For the product,under normal use condition is at least 20cm away from the body of the
user,the user must keeping at least 20 cm distance to the product.
/