ZTE Axon AXON 7 Quick start guide

Type
Quick start guide

This manual is also suitable for

1
ZTE A2017G
Quick Start Guide
2
1
ZTE AXON 7
Quick Start Guide ..............................2
ZTE AXON 7
Kurzanleitung...................................19
ZTE AXON 7
Guide de démarrage rapide.............36
2
ZTE AXON 7
Quick Start Guide
3
LEGAL INFORMATION
Copyright © 2016 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted,
reproduced, translated or used in any form
or by any means, electronic or mechanical,
including photocopying and microlm,
without the prior written permission of ZTE
Corporation.
ZTE Corporation reserves the right to make
modications on print errors or update
specications in this guide without prior
notice.
Notice
We offer self-service for our smart terminal
device users. Please visit the ZTE ofcial
website (at www.ztedevice.com) for more
information on self-service and supported
product models. Information on the website
takes precedence.
Disclaimer
ZTE Corporation expressly disclaims any
liability for faults and damages caused by
unauthorized modications of the software.
Images and screenshots used in this guide
may differ from the actual product. Content in
this guide may differ from the actual product
or software.
4
Trademarks
ZTE and the ZTE logos are trademarks of
ZTE Corporation. Google and Android are
trademarks of Google, Inc. The
Bluetooth
®
trademark and logos are owned by the
Bluetooth SIG, Inc. and any use of such
trademarks by ZTE Corporation is under
license.
microSDXC Logo is a trademark of
SD-3C, LLC.
Qualcomm
®
Snapdragon™ processors are
products of Qualcomm Technologies, Inc.
Qualcomm and Snapdragon are trademarks
of Qualcomm Incorporated, registered in the
United States and other countries. Used with
permission.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, Dolby
Atmos, and the double-D symbol are
trademarks of Dolby Laboratories.
Other trademarks and trade names are the
property of their respective owners.
5
Product Safety Information
Don’t make or receive phone
calls while driving. Never text
while driving.
For body-worn operations,
maintain a separation of 5 mm.
Small parts may cause choking.
Your phone can produce a loud
sound.
To prevent possible hearing
damage, do not listen at high
volume levels for long periods.
Avoid contact with anything
magnetic.
Keep away from pacemakers
and other electronic medical
devices.
Turn off when asked to in
hospitals and medical facilities.
Turn off when told to on aircraft
and at airport.
Turn off when near explosive
materials or liquids.
6
Don’t use at gas stations.
Your phone may produce a bright
or ashing light.
Don’t dispose of your phone in
re.
Avoid extreme temperatures.
Avoid contact with liquids. Keep
your phone dry.
Do not attempt to disassemble
your phone.
Only use approved accessories.
Don’t rely on your phone as a
primary device for emergency
communications.
7
Getting to Know Your Phone
Auxiliary
microphone
Front camera
Indicator light
nano-SIM /
microSDXC
card tray
Touch screen
Main
microphone
Charging /
USB Type-C jack
Speaker
Power key
Volume key
Proximity &
Light sensor
Earpiece
3.5mm Headset jack
Back camera
Dual-Flash
Fingerprint sensor
Menu key
Home key
Recent apps
key
8
Before Getting Started
Installing the nano-SIM / microSDXC
Card
Switch off your phone before installing the
nano-SIM / microSDXC card.
1. Insert the tip of the tray eject tool into the
hole on the card tray.
2. Pull out the card tray and place the nano-
SIM card or microSDXC card on the tray,
as shown. Then carefully install the tray
back.
9
CAUTION:
To avoid damage to the phone, please do not
use other kinds of nano-SIM cards, and do not
use a non-standard nano-SIM card cut from a
SIM card. You can get the standard nano-SIM
card from your service provider.
Charging the Battery
Your phone’s battery should have enough
power for the phone to turn on, nd a signal,
and make a few calls. You should fully charge
the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and cables.
The use of unapproved accessories could
damage your phone or cause the battery to
explode.
CAUTION:
Do not change the built-in rechargeable
battery in your phone by yourself. The
battery can only be changed by ZTE or ZTE
authorised service provider.
1. Connect the adapter to the charging jack.
Ensure that the adapter is inserted in the
correct direction.
10
2. Connect the charger to a standard AC
power outlet.
3. Disconnect the charger when the battery
is fully charged.
NOTE:
If the battery is extremely low, you may
be unable to power on the phone even
when it is being charged. In this case, try
again after charging the phone for at least
30 minutes. Contact customer service if
you still cannot power on the phone after
prolonged charging.
The battery is not removable and do not
remove the rear cover please.
Press and hold the
Power
key for about
10 seconds to force the mobile phone
restart.
11
Radio Frequency (RF) Exposure
General Statement on RF Energy
Your phone contains a transmitter and a
receiver. When it is ON, it receives and
transmits RF energy. When you communicate
with your phone, the system handling your call
controls the power level at which your phone
transmits.
Specic Absorption Rate (SAR)
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits
for exposure to radio waves recommended
by international guidelines. These guidelines
were developed by the independent scientic
organization ICNIRP and include safety
margins designed to assure the protection of
all persons, regardless of age and health.
The guidelines use a unit of measurement
known as Specic Absorption Rate, or SAR.
The SAR limit for mobile devices is 2 W/kg
and the highest SAR value for this device
when tested at the head was 0.348 W/kg*,
and when tested at the body was 1.099
W/kg*. As mobile devices offer a range of
functions, they can be used in other positions,
such as on the body as described in this user
guide**.
12
As SAR is measured utilizing the device’s
highest transmitting power, the actual SAR of
this device while operating is typically below
that indicated above. This is due to automatic
changes to the power level of the device
to ensure it only uses the minimum power
required to communicate with the network.
* The tests are carried out in accordance with
EN 50360, EN 62209-1, EN 62209-2.
** Please see body worn operation.
Body Worn Operation
Important safety information regarding radio
frequency radiation (RF) exposure:
To ensure compliance with RF exposure
guidelines the phone must be used with a
minimum of 5 mm separation from the body.
Failure to observe these instructions could
result in your RF exposure exceeding the
relevant guideline limits.
13
Limiting Exposure to Radio Frequency
(RF) Fields
For individuals concerned about limiting
their exposure to RF elds, the World Health
Organization (WHO) provides the following
advice:
Precautionary measures: Present scientic
information does not indicate the need
for any special precautions for the use of
mobile phones. If individuals are concerned,
they might choose to limit their own or their
children’s RF exposure by limiting the length
of calls, or using ‘hands-free’ devices to keep
mobile phones away from the head and body.
Further information on this subject can be
obtained from the WHO home page http://
www.who.int/peh-emf (WHO Fact sheet 193:
June 2000).
Regulatory Information
The following approvals and notices apply in
specic regions as noted.
Please nd the section Declaration of RoHS
Compliance and CE DOC in the end of this
manual.
14
Declaration of RoHS
Compliance
To minimize the environmental impacts and
take more responsibilities to the earth we
live on, this document shall serve as a formal
declaration that ZTE AXON 7 manufactured
by ZTE CORPORATION is in compliance with
the Directive 2011/65/EU of the European
Parliament - RoHS (Restriction of Hazardous
Substances) with respect to the following
substances:
1. Lead (Pb)
2. Mercury (Hg)
3. Cadmium (Cd)
4. Hexavalent Chromium (Cr (VI))
5. Polybrominated biphenyls (PBBs)
6. Polybrominated diphenyl ethers (PBDEs)
ZTE AXON 7 manufactured by ZTE
CORPORATION, meets the requirements of
EU 2011/65/EU.
15
Disposal of Your Old Appliance
1. When this crossed-out
wheeled bin symbol is
attached to a product,
it means the product is
covered by the European
Directive 2012/19/EU.
2. All electrical and
electronic products
should be disposed
of separately from the
municipal waste stream
via designated collection
facilities appointed by the
government or the local
authorities.
3. The correct disposal of
your old appliance will
help prevent potential
negative consequences
for the environment and
human health.
For this product’s recycling information based
on WEEE directive, please send an e-mail to
16
EC DECLARATION OF
CONFORMITY
It is hereby declared that following designated
product:
Product Type: LTE/WCDMA/GSM(GPRS)
Multi-Mode Digital Mobile Phone
Model No: ZTE A2017G
Product Description: LTE/WCDMA/
GSM(GPRS) Multi -Mode Digital Mobile
Phone
Complies with
the essential protection
requirements of Directives on Radio and
Telecommunication Terminal Equipment
(Directive 1999/5/EC) ,Restriction of the
Certain Hazardous Substances in electrical
and electronic equipment (Directive 2011/65/
EU), Eco-design Requirements for Energy-
Related Products (Directive 2009/125/EC)
and their amendments.
This declaration applies to all specimens
manufactured identical to the samples
submitted for testing/evaluation.
The assessments were based on the following
regulations and standards:
17
Requirement Standard Report No.
Assessment
Body
Health and
safety
EN 609501:2006+A
11:2009+A1:2010+
A12:2011+A2: 2013
SET2016-
06878
PHOENIX
TESTLAB
GmbH (Notied
Body No.0700)
EN 50332-2: 2003;
EN 50332-1: 2000
EN 50566: 2013/
AC:2014;
EN 50360:
2001+A1: 2012
EN 62209-1: 2006;
EN 62209-2: 2010;
EN 62479: 2010
SET2016-
09165
SET2016-
08394
PHOENIX
TESTLAB
GmbH (Notied
Body No.0700)
EMC
EN 301 489-1
V1.9.2; EN 301
489-3 V1.6.1;
EN 301 489-17
V2.2.1;EN 301
489-7 V1.3.1
EN 301 489-24
V1.5.1;
SET2016-
08077
PHOENIX
TESTLAB
GmbH (Notied
Body No.0700)
Radio
Spectrum
EN 301 908-1
V7.1.1;
EN 301 908-2
V6.2.1;
EN 301 908-13
V6.2.1;
EN 301511 V9.0.2;
EN 300 328 V1.8.1;
EN300 440-1
V1.6.1;
EN 300 440-2
V1.4.1;
EN 300 330-2
V1.6.1;
EN 300 330-1
V1.8.1
SET2016-
08776
SET2016-
08777
SET2016-
08775
SET2016-
09162
SET2016-
09163
SET2016-
09614
PHOENIX
TESTLAB
GmbH (Notied
Body No.0700)
18
RoHS
IEC 62321:
2008+2013+ 2015
160402228
SHA-001
Intertek Testing
Services
Ltd.,Shanghai
ErP (EC)No 278/2009 4787413983
UL-CCIC
Company
Limited
Guangzhou
Branch
This declaration is the responsibility of the
manufacturer:
ZTE Corporation
ZTE Plaza, Keji Road South, Hi-
Tech, Industrial Park, Nanshan
District,Shenzhen, Guangdong, 518057,
P.R.China
Authorised person signing for the company:
Yao Cuifeng Chief Quality Ofcer of
ZTE Corporation
Name in block letters & position in the
company
Shenzhen, 14
th
June 2016
Place & date Legally valid signature
This equipment may be
operated in:
AT BE
CY CZ DK EE FI FR
DE GR HU IE IT LV
LT LU MT NL PL PT
SK SI ES SE GB IS
LI NO CH BG RO TR
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

ZTE Axon AXON 7 Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI