Pulsar PSCL12030 is a switch mode power supply with universal AC input voltage range, high efficiency, and IP67 case. It is a stabilized DC power supply intended for supplying equipment that requires a stabilized voltage of 12V DC.
The power supply unit is protected against short-circuit, overload, and overvoltage. It has an output current of 3A at temperatures below 30°C, and 2.1A at temperatures of 40°C. Its ripple voltage is 100mV p-p max.
The power supply unit can be used in closed rooms with normal air humidity and temperatures within the range from -10°C to +40°C. It is easy to install, with a simple connection procedure. The power supply does not require any specific maintenance procedures, but it should be cleaned with compressed air in case of significant dust accumulation.
Pulsar PSCL12030 is a switch mode power supply with universal AC input voltage range, high efficiency, and IP67 case. It is a stabilized DC power supply intended for supplying equipment that requires a stabilized voltage of 12V DC.
The power supply unit is protected against short-circuit, overload, and overvoltage. It has an output current of 3A at temperatures below 30°C, and 2.1A at temperatures of 40°C. Its ripple voltage is 100mV p-p max.
The power supply unit can be used in closed rooms with normal air humidity and temperatures within the range from -10°C to +40°C. It is easy to install, with a simple connection procedure. The power supply does not require any specific maintenance procedures, but it should be cleaned with compressed air in case of significant dust accumulation.
Pulsar PSCL12030 is a switch mode power supply with universal AC input voltage range, high efficiency, and IP67 case. It is a stabilized DC power supply intended for supplying equipment that requires a stabilized voltage of 12V DC.
The power supply unit is protected against short-circuit, overload, and overvoltage. It has an output current of 3A at temperatures below 30°C, and 2.1A at temperatures of 40°C. Its ripple voltage is 100mV p-p max.
The power supply unit can be used in closed rooms with normal air humidity and temperatures within the range from -10°C to +40°C. It is easy to install, with a simple connection procedure. The power supply does not require any specific maintenance procedures, but it should be cleaned with compressed air in case of significant dust accumulation.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI