OWNER’S MANUAL
Mini Hi-Fi
System
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
CM9960 (CM9960, CMS9960F)
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
www.lg.com
MFL69365170
1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specied herein may
result in hazardous radiation exposure. To prevent
direct exposure to laser beam, do not try to open the
enclosure.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
NOTICE: For safety marking information including
product identication and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
Getting Started 3
Getting Started
1
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Check the specication page of this owner’s manual
to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result
in electric shock or re. Periodically examine the
cord of your device, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of
the device, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
This device is equipped with a portable battery or
accumulator.
How to Safely remove the batteries or the
battery pack from the equipment: To Remove the
old batteries or battery pack, follow the assembly
steps in reverse order. To prevent contamination of
the environment and bring on possible threat to
human and/or animal health, the old batteries or the
battery pack must be put in an appropriate container
at designated collection points. Do not dispose
of batteries or battery pack together with other
waste. It is recommended that you use local, free
reimbursement systems batteries or battery packs,
(may not be available in your area). The batteries or
the battery pack should not be exposed to excessive
heat such as sunshine, re or the like.
CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.
Symbols
~
Refers to alternating current(AC).
0
Refers to direct current(DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
Note: Do not look directly at the light emitting part
when the LIGHTING is turned on.
If the illumination brightness is glaring, switch on the
room lights or turn off the LIGHTING of the unit.
Table of Contents4
Table of Contents
1 Getting Started
2 Safety Information
6 Unique Features
7 Playable file Requirement
7 – Music file requirement
7 – Compatible USB Devices
7 – USB device requirement
8 Remote control
10 Front panel
10 Rear panel
11 Top panel
2 Connecting
13 How to Affix the Ferrite Core
13 – About Ferrite Core
13 Connecting to speakers
14 Optional Equipment Connection
14 – AUX IN Connection
15 – PORT. IN Connection
15 – USB Connection
16 – Antenna Connection
3 Operating
17 Basic Operations
17 – CD/USB Operations
17 – Auto Play
18 – Selecting a folder and
an MP3/WMA file
19 – Deleting an MP3/WMA file
19 Playback Effect
19 – DJ EFFECT
19 – SCRATCH Effect
20 – AUTO DJ
20 – DJ PRO
20 – Adjusting TEMPO
21 – MIX
21 – AUTO SYNC
22 Using BLUETOOTH® wireless technology
22 – Listening to music stored on the Bluetooth
devices
24 Using the Music Flow Bluetooth App
24 – About “Music Flow Bluetooth” App
24 – Install “Music Flow Bluetooth” App onto
Your Bluetooth Device
25 – Activate Bluetooth with “Music Flow
Bluetooth” App
26 Radio Operations
26 – Listening to the radio
26 – Improving poor FM reception
26 – Presetting the Radio Stations
26 – Deleting all the saved stations
27 Sound adjustment
27 – Setting the sound mode
27 – Setting the USER EQ
28 Advanced Operations
28 – Recording to USB
30 – JUKE BOX Playback
31 Other Operations
31 – Turn off the sound temporarily
31 – CHILDSAFE Mode
31 – Displaying file information
(ID3 TAG)
31 – DEMO
31 – Using Microphone
32 – Using H/P MODE
32 – VOICE CANCELLER
33 – KEY CHANGER
33 – Lighting Effects
Table of Contents 5
1
2
3
4
5
33 – PARTY THRUSTER
33 Setting the Clock
33 – Setting the Clock through “Music Flow
Bluetooth” App
33 – Using your player as an alarm clock
34 – Sleep Timer Setting
34 – Dimmer
34 Auto power down
35 – AUTO POWER On
35 – Auto function change
36 LG Sound Sync
37 WIRELESS PARTY LINK Connection
4 Troubleshooting
38 Troubleshooting
38 – General
5 Appendix
40 General specifications
41 Speakers specifications
41 Trademarks and Licenses
42 Maintenance
42 – Notes on Discs
42 – Handling the Unit
Getting Started6
Getting Started
1
Unique Features
Bluetooth®
Listens to music stored on your Bluetooth device.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc.)
Playback effects
Listens to music with various sound and playback
effects.
USB Direct Recording
Records music to your USB device.
Music Flow Bluetooth
Music Flow Bluetooth is an App designed to let you
take control of some of LG’s latest Audio devices.
Refer to page 24.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Getting Started 7
Getting Started
1
Playable file
Requirement
Music file requirement
MP3/WMA le compatibility with this unit is limited
as follows.
y Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
y Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
y Maximum les : Data CD : 999 / USB : 2000
y Maximum folders : Data CD : 99 / USB : 200
y File extensions : “.mp3”/ “.wma”
y Certain MP3/WMA les may not be played
depending on the type or format of the le.
y CD-ROM le format : ISO 9660/ JOLIET
y We recommend that you use Easy-CD Creator,
which creates an ISO 9660 le system.
The DTS is not supported. In case of DTS audio
format, audio is not output.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot use
it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
Compatible USB Devices
y MP3 Player : Flash type MP3 player.
y USB Flash Drive :
Devices that support USB2.0 or USB1.1.
y The USB function of this unit does not support all
USB devices.
USB device requirement
y Devices which require additional program
installation when you have connected it to a
computer, are not supported.
y Do not extract the USB device while in operation.
y For a large capacity USB, it may take longer than a
few minute to be searched.
y To prevent data loss, back up all data.
y If you use a USB extension cable or USB hub, the
USB device is not recognized.
y Using NTFS le system is not supported. (Only
FAT(16/ 32) le system is supported.)
y This unit recognizes up to 2,000 les.
y External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
y USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
y Some USB may not work with this unit.
Getting Started8
Getting Started
1
Remote control
Replacement of battery
(R03)
(R03)
Remove the battery cover on the rear of the remote
control, and insert the battery with 4 and 5
matched correctly.
• • • • • • • • • • • • • • a • • • • • • • • • • • • •
1 (Standby/On) : Switches the unit ON or OFF.
B (Open/Close) : Opens and closes the disc tray.
VOL (Volume) +/- : Adjusts speaker volume.
F (Function) : Selects the function and input source.
(Mute): Mutes the sound.
PRESET·FOLDER W/S :
- Searches for a folder of MP3/WMA les. When
a CD/USB containing MP3/WMA les in several
folders is being played, press PRESET·FOLDER
W/S to select the folder you want to play.
- Chooses a preset number for a radio station.
JUKEBOX/MEMORY :
- Stores radio stations.
- Deletes all the saved stations.
- Selects JUKE BOX mode.
- Makes your favorites list.
AUTO DJ : Selects the AUTO DJ mode. (For more
information refer to page 20)
DELETE :
- Deletes MP3/WMA les. (USB only).
- Deletes a song on the programmed list.
Getting Started 9
Getting Started
1
• • • • • • • • • • • • • • b • • • • • • • • • • • • •
REPEAT : Listens to your tracks/les repeatedly or
randomly.
TUNING-/+ : Selects the radio stations.
C/V (Skip/Search) :
- Skips Fast backward or Forward.
- Searches for a section within a track/le.
d/M (Play/Pause) :
- Starts or pauses playback.
- Selects STEREO/MONO.
Z (Stop):
- Stops playback or recording.
- Cancels DELETE function.
SOUND EFFECT : Chooses sound impressions.
REGION EQ : Chooses region equalizer.
INFO / SLEEP
- Sees informations about your music. An MP3 le
often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
- Sees the name of connected all Bluetooth device
in Bluetooth mode.
- In status of WIRELESS PARTY LINK Connection,
device name of SLAVE unit appears in the MASTER
unit and Device name of MASTER unit appears in
the SLAVE unit.
- Press and hold to set the system to turn off
automatically at a specified time.
(Dimmer : The display window will be darkened by
half.)
• • • • • • • • • • • • • • c • • • • • • • • • • • • •
0 to 9 numerical buttons : Selects numbered tracks,
les, or preset number.
CLOCK : Sets a clock and checks a time.
ALARM : With the ALARM function you can turn CD,
USB play and Tuner reception on at a desired time.
• • • • • • • • • • • • • • d • • • • • • • • • • • • •
VOICE CANCELLER : You can enjoy the function
while playing the music, by reducing singer vocal of
music in the various source.
DJ EFFECT : Selects DJ EFFECT mode. (Refer to
page 19)
SET : Conrms the setting.
KEY CHANGER (
/ ) : Changes the key to suit
your vocal range.
DJ LEVEL +/- : Adjusts the level of DJ EFFECT sound.
* : This button is not available.
USB REC : USB direct recording.
Getting Started10
Getting Started
1
Front panel
a
b dc e f
a Disc tray
b
Remote Sensor
c HEADPHONE
Connects a headphone.
d PORT. (Portable) IN
Connects a portable device.
e DANCE LIGHTING (Lighting ball)
- Shows the various lighting patterns and color.
- You can control angle up and down with your
nger.
f MIC (Microphone) 1/2
Connects a microphone.
Rear panel
a b d e fc
a Power cord
y Connect the power cord to wall outlet
directly if possible. Or when you use an
extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A
or 230 V / 15 A, otherwise the unit may
not operate properly because of the lack of
power supply.
y Do not overload the extension cord with
excessive electrical load.
>
Caution
b AUX IN 1/2 (L/R)
c ANTENNA (FM)
d R SPEAKERS
Connects the right speaker’s cables.
e L SPEAKERS
Connects the left speaker’s cables.
f SPEAKER LIGHTING
Connects the speaker lighting cables.
Getting Started 11
Getting Started
1
Top panel
jk lih opnm
32 1 zyx
c
d
e
f
g
w
q
r
s
t
a
b u
v
a 1/!(Standby/On)
b SCRATCH / LEVEL CONTROL, SEARCH KNOB
(A SIDE)
- Turns clockwise or counterclockwise to make
the scratch sound.
- Turns clockwise or counterclockwise to control
the DJ EFFECT level.
- Turns clockwise or counterclockwise to search
to the next/previous le or next/previous folder.
(CD/USB 1 only)
c SEARCH (A SIDE)
Searches to the next/previous le or next/
previous folder by pressing SEARCH repeatedly.
(CD/USB 1 only)
d OK (A SIDE)
Selects the desired le or folder after searching a
le or folder. (CD/USB 1 only)
e H/P MODE
Presses to select a headphone monitor mode.
f H/P VOLUME
Presses to select a headphone’s volume control
mode.
g MIC (Microphone) VOLUME
Presses to select a microphone’s volume control
mode.
h BASS BLAST
Selects BASS BLAST effect directly.
i LIGHTING
Changes the lighting patterns and colors or turns
off the lighting effects of DANCE LIGHTING and
SPEAKER LIGHTING.
j DJ PRO PAD
Presses a desired sound pad.
k AUTO SYNC
When using MIX, you can synchronize the tempo
of audio les being played in USB 1 and USB 2 by
pressing AUTO SYNC.
l Cross fader
Adjusts the sound volume of mixing les when
using MIX ON by pressing MIX.
m MIX
Mixes audio sound.
n PARTY THRUSTER
Slide the lever to create a party atmosphere.
o REGION EQ
Chooses region equalizer.
p B EJECT
Opens and closes the disc tray.
q KEY CHANGER (b/#)
Changes the key to suit your vocal range.
r VOICE CANCELLER
You can enjoy the function while playing the
music, by reducing singer vocal of music in the
various source.
s SEARCH (B SIDE)
Searches to the next/previous le or next/
previous folder by pressing SEARCH repeatedly.
(USB 2 only)
t OK (B SIDE)
Selects the desired le or folder after searching a
le or folder. (USB 2 only)
Getting Started12
Getting Started
1
u SCRATCH / LEVEL CONTROL, SEARCH KNOB
(B SIDE)
- Turns clockwise or counterclockwise to make
the scratch sound.
- Turns clockwise or counterclockwise to control
the USER EQ level.
- Turns clockwise or counterclockwise to search
to the next/previous le or next/previous folder.
(USB 2 only)
v F (Function) / WIRELESS LINK
- Selects the function and input source.
- Press and hold for 3 seconds to select
WIRELESS PARTY LINK mode.
w USB REC / DEMO
- Records to USB 1.
- Copys USB 2 to USB 1.
- Shows Demo mode.
x USER EQ
Selects the sound effect created by your own.
y Basic controls (USB 2 only)
Y/U (Skip/Search)
Skips Fast backward or Forward. /
Searches for a section within a track/le by
pressing and holding.
T (Play/Pause)
Starts or pauses playback.
I (Stop)
Stops playback or cancels DELETE function.
z A / B TEMPO
Adjusts TEMPO in USB function.
VOLUME
Adjusts speaker, microphone or headphone
volume.
1 USB a / USB b
You can play or record sound les by connecting
the USB device.
2 Basic controls (CD / USB 1 / BLUETOOTH /
RADIO only)
Y/U (Skip/Search)
- Skips Fast backward or Forward. /
Searches for a section within a track/le by
pressing and holding.
- Selects the radio stations.
T (Play/Pause)
-Starts or pauses playback.
- Selects Stereo/Mono.
I (Stop)
Stops playback or cancels DELETE function.
3 DJ EFFECT
Selects a desired DJ effect.
2 Connecting
Connecting 13
Connecting
2
How to Affix the Ferrite
Core
Ferrite core may not be provided depending on each
nation’s regulations.
About Ferrite Core
You must afx a ferrite core in order to reduce or
eliminate electrical interference.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the L SPEAKERS cables around the ferrite
core twice.
Wind the R SPEAKERS cables around the ferrite
core twice.
Wind the LEFT and RIGHT SPEAKER LIGHTING
cables all together around the ferrite core twice.
3. Close the ferrite core until it clicks.
Connecting to speakers
Connect the speaker cable plugs to the SPEAKERS
connector.
To connect the speaker light cable to the unit, insert
the cable to SPEAKER LIGHTING connectors on the
unit.
y
Make sure that the jacks and the speakers
are matched correctly.
y
Make sure to connect the cables to
connectors tightly on the unit.
>
Caution
Connecting14
Connecting
2
y
Do not try to lift the speaker alone. It needs
two persons to lift the speaker. Otherwise
it may result in the speaker malfunction
and cause personal injury and/or property
damage.
y
When you connect the speakers to the unit,
make sure to connect the speaker’s cable and
plug to the corresponding speaker connector.
y
The speakers must be placed a minimum
of 20 cm from the unit for preventing the
vibration caused by the speakers.
20 cm
20 cm
y
Check the volume level before playing music
to prevent inrm, child, and pregnant women
from being shocked by the sudden and loud
sound from the unit.
y
Do not use the unit in a limited space. It may
damage a person’s hearing. It is recommended
to use it in a wide space.
y
Be careful to make sure children not to put
their hands or any objects into the opening
speaker duct hole.
y
Use the speaker supplied with this unit
only. Using any other speaker may cause
malfunction.
y
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
y
Avoid looking at the speaker lights for a long
time. It may cause damage to eyesight.
>
Caution
Optional Equipment
Connection
AUX IN Connection
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN 1/2 (L/R) connector.
If your device has only one output for audio (mono),
connect it to the left audio jack on the unit.
Audio cable
DVD, Blu-ray player etc.
Red
White
Connecting 15
Connecting
2
PORT. IN Connection
Connect an output (earphone or line out) of portable
device (MP3 or PMP etc) to the PORT. IN connector.
Portable cable
MP3 player etc.
Listening to music from your portable
player or external device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the PORT. IN
connector of the unit.
Or
Connect the external device to the AUX IN 1/2
(L/R) connector of the unit.
2. Turn the power on by pressing
1
on the remote
control or
1
/
!
on the unit.
3. Press F on the remote control or F / WIRELESS
LINK on the unit to select AUX 1, AUX 2 or
PORTABLE function.
4. Turn on the portable player or external device and
start it playing.
Automatically switches to the PORTABLE
function when you connect the portable device
to the PORT. IN connector.
,
Note
USB Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
USB device
Removing the USB device from the unit :
1. Choose a different function/mode or
press
Z
on the remote control or
I
on
the unit twice in a row.
2. Remove the USB device from the unit.
,
Note
Connecting16
Connecting
2
Antenna Connection
Connect the supplied FM antenna for listening to the
radio.
Connect the FM wire antenna to the FM antenna
connector.
FM antenna
Be sure to fully extend the FM wire antenna.
,
Note
3 Operating
Operating 17
Operating
3
Basic Operations
CD/USB Operations
1. Insert the disc by pressing
B
on the remote
control or
B
EJECT on the unit or connect the
USB device to the USB port.
2. Select CD or USB function by pressing F on the
remote control or F / WIRELESS LINK on the unit.
To Do this
Stop
Press
Z
on the remote control or
I
on the unit.
Playback
Press
d
/
M
on the remote control or
T
on the unit.
Pause
Press
d
/
M
on the remote control or
T
on the unit during playback.
Searching
for a section
within a track/
le
Press and hold
C
/
V
on the
remote control or
Y
/
U
on the
unit during playback and release it at
the point you want to listen to.
Selecting
a track/le
directly
Press 0 to 9 numerical buttons on
the remote control to go to the
desired le or track directly.
Skipping to
the next/
previous
track/le
- In stop status,
Press
C
/
V
on the remote
control or
Y
/
U
on the unit to
go to the next/previous track/le.
- During Playback,
By using
C/V
buttons :
Press
V
on the remote control or
U
on the unit to go to the next
track/le.
Playing less than 2 seconds, press
C
on the remote control or
Y
on the unit to go to the previous
track/le.
Playing after 3 seconds, press
C
on the remote control or
Y
on
the unit to go to the beginning of
the track/le.
Playing
repeatedly or
randomly
Press REPEAT on the remote
control repeatedly. Refer to the note
for details about the display change.
y
The display changes in the following order.
USB MP3/WMA CD Audio CD
REPEAT TRK
REPEAT *DIR
REPEAT ALL
RANDOM
OFF
REPEAT TRK
REPEAT DIR
REPEAT ALL
RANDOM
OFF
REPEAT TRK
-
REPEAT ALL
RANDOM
OFF
*DIR : Directory
y
When you play JUKE BOX list, only REPEAT
TRK and REPEAT ALL are available.
y
Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
y
The next le name is displayed every 30
seconds. (Except RANDOM play, AUTO DJ
RANDOM play, the last le of playlist, etc.)
y
If you leave the disc tray open for 5 minutes,
it will close automatically.
,
Note
Auto Play
- AUDIO/MP3/WMA CD is played automatically
after disc tray is open and then closed.
- Automatically switches to the CD function if disc
tray is open and then closed when there is no disc
in disc tray.
- When CD or USB is inserted
- If you press
T
on the A SIDE of the unit,
the function is changed to CD or USB 1 and
playback starts. (Except Bluetooth / Tuner
Function)
- If you press
T
on the B SIDE of the unit, the
function is changed to USB 2 and playback
starts. (except MIXER ON mode)
Operating18
Operating
3
y
When CD or USB is inserted
- Function is changed to CD or USB 1 if
Y
/
U
,
I
, SEARCH on the A SIDE
of the unit is pressed. (Except Bluetooth/
Tuner Function)
- Function is changed to USB 2 if
Y
/
U
,
I
, SEARCH on the B SIDE of the unit is
pressed. (Except MIXER ON mode)
,
Note
Selecting a folder and
an MP3/WMA file
On the unit
1. Press SEARCH and rotate SCRATCH / LEVEL
CONTROL, SEARCH KNOB until a desired file
appears. You can also search a folder if you press
SEARCH again.
2. Press OK or
T
to play the selected file.
When you search a folder, press OK to select a
file in the folder, then press OK or
T
again. The
selected file is played.
On the remote control
1. Press PRESET·FOLDER
W
/
S
on the remote
control repeatedly until a desired folder appears.
2. Press
d
/
M
to play it. The first file of folder will play.
y
CD / USB Folders/Files are recognized as
below.
y
If there is no le in a folder, the folder will not
appear.
y
Folders will be presented as the following
order;
ROOT
FOLDER 1 FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
y
File will be played from
$
le No.1 to
$
le
No.14 one by one.
y
Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
y
*ROOT : The rst screen you can see when a
computer recognize the USB is “ROOT”.
,
Note
Operating 19
Operating
3
Deleting an MP3/WMA file
You can delete file, folder or format by pressing
DELETE. This function is supported only in stop
status. (USB only)
1. - Select the file you want to delete and press
DELETE.
- Select the folder you want to delete by pressing
PRESET·FOLDER
W
/
S
on the remote control
and press DELETE.
- Press and hold DELETE to format the USB
device.
Or
Press DELETE repeatedly during selecting the
MP3/WMA file.
The display changes in the following order.
- DEL FILE? : Deletes file
- DEL FOLDER? : Deletes folder
- FORMAT? : Formats USB
2. To delete file/folder or format, press
d
/
M
on the
remote control or press
T
on the unit.
If you want to exit the current mode, press
Z
on
the remote control or press
I
on the unit.
y
Do not extract the USB device during
operation. (play, delete, etc.)
y
Regular back up is recommended to prevent
data loss.
y
The delete function may not be supported
according to the USB status. (lock, etc.)
>
Caution
Playback Effect
The unit supports various sound and playback effects
: DJ EFFECT, SCRATCH, DJ PRO, AUTO DJ, TEMPO,
MIX, AUTO SYNC.
DJ EFFECT
It allows you to enjoy DJ EFFECT such as FLANGER/
PHASER/WAH/DELAY sound effect.
1. Press DJ EFFECT to select a desired DJ EFFECT
(FLANGER, PHASER, WAH, DELAY, OFF).
2. Turn SCRATCH / LEVEL CONTROL, SEARCH
KNOB clockwise or counterclockwise to adjust
the DJ EFFECT level between 0 to 15.
y
The DJ EFFECT mode is displayed for 3
seconds when a DJ EFFECT Key is inputted.
y
The current gage level is displayed when
adjusting gage.
y
If the function changed or the unit is turned
off and on, DJ EFFECT mode with DJ EFFECT
is turned off.
,
Note
SCRATCH Effect
You can output and mix the sound effects of the
SCRATCH.
Rotating SCRATCH / LEVEL CONTROL, SEARCH
KNOB to mix the scratch sound.
- You can hear effect of scratch sound depending
on the direction in which you rotate SCRATCH /
LEVEL CONTROL, SEARCH KNOB.
Operating20
Operating
3
AUTO DJ
Auto DJ blends the end of one song into the
beginning of another for seamless playback. It
equalizes volume across tracks/les for uninterrupted
playback.
Press AUTO DJ on the remote control repeatedly, the
display changes as followings. RANDOM (AUTO DJ
RANDOM) -> REPEAT ALL (AUTO DJ SEQUENTIAL)
-> (AUTO DJ OFF)
Mode
Display
Window
Description
RANDOM
RANDOM
(AUTO DJ
RANDOM)
The music is played
randomly on this
mode.
REPEAT
REPEAT ALL
(AUTO DJ
SEQUENTIAL)
The music is played
repeatedly on this
mode.
OFF
-
(AUTO DJ OFF)
-
y
AUTO DJ mode does not support searching
for a section within a track/le or to play
repeatedly or randomly.
y
If you move to other functions or stop the
music using
I
on the unit (or
Z
on the
remote control) on AUTO DJ mode, AUTO DJ
will be disable.
y
AUTO DJ is not supported in the music le
whose length is less than 60 seconds.
y
During recording, AUTO DJ is not available.
y
Only AUTO DJ SEQUENTIAL is selected when
played JUKE BOX list.
,
Note
DJ PRO
It allows you to mix CLUB, DRUM or USER sound
effect. Each mode has up to 6 sounds effect.
1. Press and hold DJ PRO PAD (CLUB, DRUM or
USER) to select a desired DJ PRO sound effect.
2. Press a DJ PRO PAD (1,2,3,4,5,6) of desired
sound.
y
If you want to use USER, you have to register
a source with “Music Flow Bluetooth” app. If
the source is not register to USER, “EMPTY”
or “NO SOUND” appears on the display
window.
y
Initial DJ PRO mode is CLUB sound effect.
y
DJ PRO mode is displayed for 3 seconds when
you press DJ PRO PAD (CLUB, DRUM or
USER).
y
The DJ PRO sound is mixed when you press a
DJ PRO PAD (1,2,3,4,5,6).
y
The currently playing DJ PRO sound is
stopped and the selected DJ PRO sound
outputs if you press a different DJ PRO PAD
(1,2,3,4,5,6) while DJ PRO sound is playing.
,
Note
Adjusting TEMPO
You can adjust the Tempo for USB function 1 or 2
from 50 (MIN) to 150 (MAX).
Rotate A TEMPO to adjust the tempo for USB 1.
Rotate B TEMPO to adjust the tempo for USB 2.
y
The tempo is set as 100 if you turn the unit
off, change the function or fully stop.
y
The tempo is kept when you pause and
resume play.
,
Note
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
