Validity
The installation instructions apply to the models: TL WP (12001), TS WP (12002), TSL WP (12003)
Brief description
If, contrary to expectations, a front roller breaks, a roller holder, cpl., can be mounted.
Order number for roller holder set, cpl. CS: W5.6331
Procedure
Pull the plug out of the mains socket or switch off at the wall
switch.
1
0
1
0
Dismount the cover plate.
Dismount the side panel.
Dismount the drum belt.
Dismount the rest of the original roller.
Using a metal saw, saw off any protruding parts.
Mount the roller set, cpl., 2.
Turn the roller set, cpl., 2 90 ° if mounting on the other side of
the appliance.
Mount the drum belt.
Mount the side panel.
Mount the cover plate.
Plug the appliance in at the mains or turn the wall switch on.
Carry out a test run.
1
0
1
0
Installation instructions
J12001.532-0
Roller holder
19.03.13
Heat pump dryer
One-family household
1
-
1
