AVENTICS Intermediate-flanges Assembly Instructions

Intermediate-flanges
AVENTICS
Brand
AVENTICS
Model
Intermediate-flanges
Type
Assembly Instructions

This manual is also suitable for

AVENTICS Intermediate-flanges JP1 enable the easy and space-saving connection of multiple pneumatic cylinders to a common air supply. They are suitable for use with AVENTICS multi-position cylinders and are available in a range of sizes to accommodate different cylinder bore diameters. The intermediate flanges are made of high-quality aluminum and are designed for durability and long service life. They are easy to install and can be used in a variety of applications, including packaging, material handling, and machine tools.

AVENTICS Intermediate-flanges JP1 enable the easy and space-saving connection of multiple pneumatic cylinders to a common air supply. They are suitable for use with AVENTICS multi-position cylinders and are available in a range of sizes to accommodate different cylinder bore diameters. The intermediate flanges are made of high-quality aluminum and are designed for durability and long service life. They are easy to install and can be used in a variety of applications, including packaging, material handling, and machine tools.

The data specified above only serve to
describe the product. No statements
concerning a certain condition or suitability
for a certain application can be derived from
our information. The given information does
not release the user from the obligation of
own judgement and verification. It must be
remembered that our products are subject
to a natural process of wear and aging.
An example configuration is depicted on the
title page. The delivered product may thus
vary from that in the illustration.
Translation of the original operating
instructions. The original operating
instructions were created in the German
language.
1829927207–BDL–001–AA/12.2014
Subject to modifications. © All rights
reserved by AVENTICS GmbH, even and
especially in cases of proprietary rights
applications. It may not be reproduced or
given to third parties without its consent.
AVENTICS GmbH
Ulmer Straße 4
30880 Laatzen
Phone +49 (0) 5 11-21 36-0
Fax: +49 (0) 511-21 36-2 69
www.aventics.com
[email protected]
Further addresses:
www.aventics.com/contact
Montageanleitung | Assembly instructions | Instructions de montage
Istruzioni di montaggio | Instrucciones de montaje | Monteringsanvisning
Zwischenflansch für Mehrstellungszylinder
Intermediate flange for multi-position cylinders
Bride intermédiaire pour vérin multipositions
Flangia intermedia per cilindro multiposizione
Brida intermedia para cilindro con varias posiciones
Mellanfläns för flerstegscylinder
JP1
1829927207/12.2014
Replaces: –, DE/EN/FR/IT/ES/SV
1AVENTICS | JP1 | 1829927207–BDL–001–AA
1.
2.
5.
3.
4.
6.
SW
X
X
MD
SW
MD
Ø [mm] SW MD [Nm]
32–40 10 5
50–63 13 10
80–100 16 20
125 18 25
Ø Zylinder/cylinder/vérin/
cilindro/cilindro/cylinder
SW Schlüsselgröße/wrench
size/taille de la clé/
Misura della chiave/
tamaño de llave/
nyckelstorlek
MD Drehmoment/torque/
couple/coppia/par de
apriete/vridmoment
X = Auf Anschlag einschrauben
Screw to stop
Visser jusqu'à la butée
Avvitare fino alla battuta
Enroscar hasta el tope
Skruva in i anslaget
  • Page 1 1

AVENTICS Intermediate-flanges Assembly Instructions

Intermediate-flanges
AVENTICS
Brand
AVENTICS
Model
Intermediate-flanges
Type
Assembly Instructions
This manual is also suitable for

AVENTICS Intermediate-flanges JP1 enable the easy and space-saving connection of multiple pneumatic cylinders to a common air supply. They are suitable for use with AVENTICS multi-position cylinders and are available in a range of sizes to accommodate different cylinder bore diameters. The intermediate flanges are made of high-quality aluminum and are designed for durability and long service life. They are easy to install and can be used in a variety of applications, including packaging, material handling, and machine tools.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers