Shimano CS-HG50-7 Service Instructions

Shimano
Brand
Shimano
Model
CS-HG50-7
Type
Service Instructions

This manual is also suitable for

Shimano CS-HG50-7 cassette sprocket is a 7-speed cassette sprocket compatible with freewheel bodies that can accommodate a 1.0mm wide sprocket. Shimano CS-HG50-7 is made for recreational riding and can be used with a variety of group sets, including Shimano's Acera, Alivio, and Altus group sets. It features a wide range of gear ratios to help you tackle hills and maintain a comfortable cadence on flat terrain. The sprockets are made of durable steel and are designed to withstand the rigors of everyday riding.

Shimano CS-HG50-7 cassette sprocket is a 7-speed cassette sprocket compatible with freewheel bodies that can accommodate a 1.0mm wide sprocket. Shimano CS-HG50-7 is made for recreational riding and can be used with a variety of group sets, including Shimano's Acera, Alivio, and Altus group sets. It features a wide range of gear ratios to help you tackle hills and maintain a comfortable cadence on flat terrain. The sprockets are made of durable steel and are designed to withstand the rigors of everyday riding.

H
Y
P
E
R
G
L
I
D
E
-
C
J
A
P
A
N
U
.
S
.
P
A
T
4
2
6
8
2
5
9
L
O
C
K
4
0
0
k
g
/
c
m
O
N
A
M
I
H
S
Installation of the sprockets
The 6 sprockets are secured by means of rivets.
Lock ring
For installation of the HG sprockets, use the special tool
(TL-LR15) to tighten the lock ring.
To replace the HG sprockets, use the special tool (TL-
LR15) and TL-SR21 to remove the lock ring.
Tightening torque:
30 - 50 N·m {261 - 434 in. lbs.}
Lock ring
Tool
(TL-SR21)
Disassembly
Assembly
TL-LR15
TL-LR15
Group name Tooth combination
12, 14, 16, 18, 21, 24, 28T
Cassette sprocket tooth combination
(Gears : 7)
E
F
G
H
I
14, 16, 18, 21, 24, 28, 32T
13, 15, 17, 20, 23, 26, 30T
13, 15, 17, 19, 21, 23, 26T
13, 14, 15, 17, 19, 21, 23T
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
* Service Instructions in further languages are available at :
http://techdocs.shimano.com
Please note: specifications are subject to change for improvement without notice. (English)
© Apr. 2009 by Shimano Inc. XBC SZK Printed in Singapore.
General Safety Information
WARNING
• Check that the wheels are fastened securely before riding the bicycle. If the
wheels are loose in any way, they may come off the bicycle and serious
injury may result.
• Obtain and read the service instructions carefully prior to installing the
parts. Loose, worn or damaged parts may cause the bicycle to fall over
and serious injury may occur as a result. We strongly recommend only
using genuine Shimano replacement parts.
• Obtain and read the service instructions carefully prior to installing the
parts. If adjustments are not carried out correctly, the chain may come off
and this may cause you to fall off the bicycle which could result in serious
injury.
• Read these Technical Service Instructions carefully, and keep them in a
safe place for later reference.
Note
• Always be sure to use the sprocket set bearing the
same group marks. Never use in combination with a
sprocket bearing a different group mark.
• Be sure to read the service instructions for the Rear
Drive System in conjunction with these service
instructions.
• Parts are not guaranteed against natural wear or
deterioration resulting from normal use.
• For maximum performance we highly recommend
Shimano lubricants and maintenance products.
• For any questions regarding methods of installation, adjustment,
maintenance or operation, please contact a professional bicycle dealer.
Technical Service Instructions SI-0099A-001
Cassette sprocket
g
a
-
18
T
-
S
H
I
M
A
N
O
H
Y
P
E
R
G
L
I
D
E
C
a
g
-
1
5
T
a
g
-
1
3
T
Group marks
SI-0099A-001-00
Group name Tooth combination
13, 14, 15, 16, 17, 19, 21TJ
K
L
M
ac
13, 15, 17, 20, 24, 29, 34T
12, 13, 14, 15, 17, 19, 21T
13, 15, 17, 19, 21, 24, 28T
11, 13, 15, 18, 21, 24, 28T
<F, G, H, I, J, K, M>
a
b
1
1
T
H
Y
P
E
R
G
L
I
D
E
-
C
J
A
P
A
N
U
.
S
.
P
A
T
4
2
6
8
2
5
9
L
O
C
K
4
0
0
k
g
/
c
m
O
N
A
M
I
H
S
The 5 sprockets are secured by means of rivets.
<L, ac>
H
Y
P
E
R
G
L
I
D
E
-
C
J
A
P
A
N
U
.
S
.
P
A
T
4
2
6
8
2
5
9
L
O
C
K
4
0
0
k
g
/
c
m
O
N
A
M
I
H
S
The 6 sprockets are secured by means of rivets.
<E>
Lock ring
Lock ring
Sprocket spacers (1.0 mm)
Sprocket spacers (1.0 mm)
For each sprocket, the surface
that has the group mark should
face outward and be positioned
so that the triangle (
U) mark on
each sprocket and the A part
(where the groove width is
wide) of the freewheel body are
aligned.
The groove is wide at
one place only.
a
c
-
1
4
T
A
U mark
  • Page 1 1

Shimano CS-HG50-7 Service Instructions

Shimano
Brand
Shimano
Model
CS-HG50-7
Type
Service Instructions
This manual is also suitable for

Shimano CS-HG50-7 cassette sprocket is a 7-speed cassette sprocket compatible with freewheel bodies that can accommodate a 1.0mm wide sprocket. Shimano CS-HG50-7 is made for recreational riding and can be used with a variety of group sets, including Shimano's Acera, Alivio, and Altus group sets. It features a wide range of gear ratios to help you tackle hills and maintain a comfortable cadence on flat terrain. The sprockets are made of durable steel and are designed to withstand the rigors of everyday riding.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents