AEG L9FSC969R User manual

Brand: AEG

Model: L9FSC969R

Category: Washing machines

Type: User manual

USER

MANUAL

EN User Manual

Washing Machine

L9FSC969R

CONTENTS

1. SAFETY INFORMATION.............................................................................................3

2. SAFETY INSTRUCTIONS.............................................................................................4

3. INSTALLATION............................................................................................................6

4. PRODUCT DESCRIPTION.........................................................................................11

5. THE WATER SOFTENER (SOFTWATER TECHNOLOGY)......................................13

6. BEFORE FIRST USE................................................................................................... 16

7. CONTROL PANEL..................................................................................................... 16

8. DIAL AND BUTTONS................................................................................................18

9. PROGRAMMES..........................................................................................................21

10. SETTINGS................................................................................................................ 25

11. DAILY USE................................................................................................................26

12. HINTS AND TIPS..................................................................................................... 31

13. CARE AND CLEANING.......................................................................................... 32

14. TROUBLESHOOTING.............................................................................................37

15. CONSUMPTION VALUES.......................................................................................40

16. TECHNICAL DATA..................................................................................................41

17. ACCESSORIES.........................................................................................................42

18. PRODUCT INFORMATION SHEET IN REFERENCE TO E.U. REGULATION

1369/2017........................................................................................................................43

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com/webselfservice

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

www.aeg.com

1. SAFETY INFORMATION

Before the installation and use of the appliance,

carefully read the supplied instructions. The

manufacturer is not responsible for any injuries or

damages that are the result of incorrect installation or

usage. Always keep the instructions in a safe and

accessible location for future reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a

safe way and understand the hazards involved.

• Children between 3 and 8 years of age and persons

with very extensive and complex disabilities shall be

kept away unless continuously supervised.

• Children of less than 3 years of age should be kept

away unless continuously supervised.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of

it appropriately.

• Keep detergents away from children.

• Keep children and pets away from the appliance when

the door is open.

• If the appliance has a child safety device, it should be

activated.

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2

General Safety

• Do not change the specification of this appliance.

• This appliance is intended to be used in household

and similar applications such as:

– staff kitchen areas in shops, offices and other

working environments;

ENGLISH

– by clients in hotels, motels, bed & breakfast and

other residential type environments;

– areas for communal use in blocks of flats or in

launderettes.

• Do not exceed the maximum load of 9 kg (refer to the

"Programme chart" chapter).

• The operating water pressure at the water entry point

from the outlet connection must be between 0.5 bar

(0.05 MPa) and 8 bar (0.8 MPa).

• The ventilation opening in the base must not be

covered by a carpet, mat, or any floor covering.

• The appliance must be connected to the water mains

using the new supplied hose sets, or other new hose

sets supplied by the Authorised Service Centre.

• Old hose sets must not be reused.

• If the mains power supply cable is damaged, it must

be replaced by the manufacturer, its Authorised

Service Centre or similarly qualified persons to avoid

an electrical hazard.

• Before any maintenance operation, deactivate the

appliance and disconnect the mains plug from the

socket.

• Do not use high pressure water sprays and/or steam

to clean the appliance.

• Clean the appliance with a moist cloth. Use only

neutral detergents. Do not use abrasive products,

abrasive cleaning pads, solvents or metal objects.

SAFETY INSTRUCTIONS

2.1 Installation

The installation must comply

with relevant national

regulations.

• Remove all the packaging and the

transit bolts including rubber bush

with plastic spacer.

• Keep the transit bolts in a safe place.

If the appliance is to be moved in the

future they must be reattached to lock

the drum to prevent an internal

damage.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Do not install or use a damaged

appliance.

• Follow the installation instructions

supplied with the appliance.

• Do not install or use the appliance

where the temperature can be less

than 0°C or where it is exposed to the

weather.

www.aeg.com4

• The floor area on which the appliance

is to be installed must be flat, stable,

heat resistant and clean.

• Make sure that there is air circulation

between the appliance and the floor.

• When the appliance is in its

permanent position, check if it is

levelled correctly with the aid of a

spirit level. If it is not, adjust the feet

accordingly.

• Do not install the appliance directly

above a floor drain.

• Do not spray water on the appliance

and do not expose it to excessive

humidity.

• Do not install the appliance where the

appliance door cannot be fully

opened.

• Do not put a closed container to

collect possible water leakage under

the appliance. Contact the Authorised

Service Centre to ensure which

accessories can be used.

2.2 Electrical connection

WARNING!

Risk of fire and electric

shock.

• The appliance must be earthed.

• Always use a correctly installed

shockproof socket.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug and to the mains

cable. Should the mains cable need

to be replaced, this must be carried

out by our Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• Do not touch the mains cable or the

mains plug with wet hands.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• UK and Ireland only. This appliance is

fitted with a 13 A mains plug. If it is

necessary to change the mains plug

fuse, use only a 13 A ASTA (BS 1362)

fuse.

• This appliance complies with the

E.E.C. Directives.

2.3 Water connection

• Do not cause damage to the water

hoses.

• Before connection to new pipes,

pipes not used for a long time, where

repair work has been carried out or

new devices fitted (water meters,

etc.), let the water flow until it is clean

and clear.

• Ensure that there are no visible water

leaks during and after the first use of

the appliance.

• Do not use an extension hose if the

inlet hose is too short. Contact the

Authorised Service Centre for the

replacement of the inlet hose.

• It is possible to see water flowing

from the drain hose. This is due to the

testing of the appliance with the use

of water in the factory.

• You can extend the drain hose to

maximum 400 cm. Contact the

Authorised Service Centre for the

other drain hose and the extension.

2.4 Use

WARNING!

Risk of injury, electric shock,

fire, burns or damage to the

appliance.

• Follow the safety instructions on the

detergent packaging.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

• Make sure that all metal objects are

removed from the laundry.

• Do not wash fabrics which are heavily

soiled with oil, grease or other greasy

substances. It can damage rubber

parts of the washing machine.

Prewash such fabrics by hand before

loading them into the washing

machine.

• Do not touch the glass door while a

programme is in operation. The glass

can get hot.

ENGLISH

2.5 Internal lighting

WARNING!

Risk of injury.

• Visible LED radiation, do not look

directly into the beam.

• The LED lamp is dedicated to drum

lighting. This lamp cannot be reused

for other lighting purposes.

• To replace the internal lighting,

contact the Authorised Service

Centre.

2.6 Service

• To repair the appliance contact an

Authorised Service Centre.

• Use original spare parts only.

2.7 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains electrical and water supplies.

• Cut off the mains electrical cable

close to the appliance and dispose of

it.

• Remove the door catch to prevent

children or pets from becoming

trapped in the drum.

• Dispose of the appliance in

accordance with local requirements

for the disposal of Waste Electrical

and Electronic Equipment (WEEE).

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Unpacking

WARNING!

Remove all the packaging

and the transit bolts before

installing the appliance.

WARNING!

Use the gloves.

1. Remove the external film. If

necessary, use a cutter.

2. Remove the cardboard top and the

polystyrene packaging materials.

3. Remove the internal film.

4. Open the door and remove the

polystyrene piece from the door seal

and all the items from the drum.

www.aeg.com

5. Carefully put the appliance down on

its rear side.

6. Put the front polystyrene packaging

element on the floor under the

appliance.

Make sure not to damage

the hoses.

7. Remove the polystyrene protection

from the bottom.

8. Fully clean and dry the bottom of the

appliance.

CAUTION!

Do not use alcohol, solvents

or chemical products.

9. Make sure to identify the different

sizes and the positions of the sound

barriers. Refer to the illustration:

• A (FRONT) = Front of the

appliance

• B (BACK) = Rear of the appliance

10. Remove the adhesive strip from the

silent barriers.

11. Attach the four barriers to bottom of

the appliance.

12. Refer to the illustration. Make sure

that the barriers are securely

attached.

ENGLISH

Attach the sound barriers at

a room temperature.

13. Pull up the appliance in vertical

position.

14. Remove the power supply cable and

the drain hose from the hose holders.

It is possible to see water

flowing from the drain hose.

This is due to the testing

with water of the appliance

in factory.

15. Remove the three bolts by using the

spanner supplied with the appliance.

16. Pull out the plastic spacers.

17. Put the plastic caps, that you find in

the user manual bag, in the holes.

We recommend that you

keep the packaging and the

transit bolts for any

movement of the appliance.

3.2 Installation on suspended

flooring

Suspended wooden floors are

particularly susceptible to vibration.

To limit vibration we recommend placing

a waterproof wooden panel, at least 15

mm thick, under the appliance. It should

be screwed to at least 2 floor beams and

should extend beyond the front feet.

If possible, install the appliance where

the floor is more stable.

3.3 Positioning and levelling

1. Install the appliance on a flat hard

floor.

Make sure that the

appliance does not touch

the wall or other units.

2. Loosen or tighten the feet to adjust

the level.

WARNING!

Do not put cardboard, wood

or equivalent materials

below the appliance feet to

adjust the level.

www.aeg.com8

The appliance must be level and stable.

A correct adjustment of the

appliance level prevents the

vibration, noise and the

movement of the appliance

when in operation.

When the machine is

installed on a plinth or if a

washer dryer is stacked on

the washing machine, use

the accessories described in

chapter 'Accessories'. Read

carefully the instructions

supplied with the appliance

and with the accessory.

3.4 The inlet hose

1. Connect the water inlet hose to the

back of the appliance.

2. Position it toward left or right

depending on the position of the

water tap.

Make sure that the inlet hose

is not in vertical position.

3. If necessary, loose the ring nut to set

it in the correct position.

4. Connect the water inlet hose to the

cold water tap with 3/4" thread.

CAUTION!

Make sure that there are no

leaks from the couplings.

Do not use an extension

hose if the inlet hose is too

short. Contact the service

centre for the replacement

of the inlet hose.

3.5 Water drainage

The drain hose should be positioned at a

height of not less than 60 cm and not

more than 100 cm from the floor.

ENGLISH

You can extend the drain

hose to maximum 400 cm.

Contact the authorized

service centre for the other

drain hose and the

extension.

It is possible to connect the drain hose in

different ways:

1. Make a U shape with the drain hose

and put it around the plastic hose

guide.

2. On the edge of a sink - Fasten the

guide to the water tap or to the wall.

Make sure that the plastic

guide cannot move when

the appliance drains.

Make sure that the drain

hose end is not immersed in

the water. There may be a

return of dirty water into the

appliance.

3. To a stand pipe with vent-hole -

Insert the drain hose directly into a

drain pipe. Refer to the illustration.

The end of the drain hose

must always be ventilated ,

i.e. the inner diameter of the

drain pipe (min. 38 mm -

min. 1.5") must be larger

than the external diameter

of the drain hose.

4. If the end of the drain hose looks like

this (see the picture), you can push it

directly into the stand pipe.

5. Without the plastic hose guide, to

a sink spigot - Put the drain hose in

the spigot and tighten it with a

clamp. Refer to the illustration.

Make sure that the drain

hose makes a loop to

prevent particles going into

the appliance from the sink.

www.aeg.com10

6. Position the hose directly to a built-

in drain pipe in the room wall and

tighten it with a clamp.

4. PRODUCT DESCRIPTION

4.1 Special features

Your new washing machine meets all

modern requirements for an effective

treatment of laundry with low water,

energy and detergent consumption and

proper care of fabric.

• The SoftWater Technology acts as

water softener and removes harsh

minerals from the inlet water and

supplies soft water for the washing.

Wash after wash, fabric stiffness,

shrinkage and colour fading are

prevented.

• The Oko-Mix technology has been

designed to protect the fabric fibres

thanks to different pre-mixing phases

that dissolves first the detergent and

then fabric softener in the water

before they are distributed in the

laundry. So every fibre is reached and

cared for.

• The ProSense technology detects

the laundry load size defining the

programme duration in 30 seconds.

The washing programme is tailored to

the laundry load and the type of fabric

without consuming more time, energy

and water than necessary.

• The steam has a quick and easy way

to refresh the clothes. The gentle

steam programmes remove odours

and reduce creases in dry fabrics so

they need little ironing.

The Plus Steam option, finishes every

cycle with gentle steam that relaxes

the fibres and reduces fabric creasing.

Ironing will be easier!

• The Stains option pre-treats stubborn

stains optimizing the effectiveness of

the stain remover.

• Thanks to the Soft Plus option, the

fabric softener is uniformly spread out

in the laundry and deeply penetrates

the fabric fibres favouring a perfect

softness.

ENGLISH

4.2 Appliance overview

1 2 3

12 13

Worktop

Detergent dispenser and salt

compartment

Control panel

Door handle

Rating plate

Internal light

Drain pump filter

Feet for levelling the appliance

Drain hose

Inlet hose connection

Mains cable

Transit bolts

Hose support

4.3 Detergent dispenser and

salt compartment

Always follow the

instructions that you find on

the packaging of the

detergent products. Anyway,

we recommend not to

exceed the maximum

indicated level in each

compartment ( ).

▼

Salt

Compartment for washing phase:

powder detergent, stain remover.

When using liquid

detergent, make sure

that the special

container for liquid

detergent is inserted.

Refer to 'Filling the

detergent and

additives' in 'Daily

Use' chapter.

Compartment for liquid additives

(fabric conditioner, starch).

www.aeg.com12

Salt

Compartment for salt.

Read carefully 'The

Water Softener

technology ( Soft

Water)'.

Maximum level for detergent/

additives quantity.

When selecting a prewash

phase, put the detergent/

additive in a dosing ball

inside the drum.

After a washing cycle, if

necessary, remove any

detergent residue from the

detergent dispenser.

5. THE WATER SOFTENER (SOFTWATER

TECHNOLOGY)

5.1 Introduction

The water contains harsh minerals. The

higher the content of these minerals the

harder the water is.

Hard water can reduce the effectiveness

of the detergent, reduce the softness of

fabrics and contribute towards shrinkage

and colour fading.

This appliance is equipped with a water

softener able to provide the right degree

of water softening to preserve the fabric

integrity, colour brightness and ensuring

good wash performances at low

temperature.

The water softener should be adjusted

according to the water hardness of your

inlet water. A correct setting allows to

achieve the best washing results and the

maximum garments protection.

To set the water softener correctly,

please refer to 'How to set the water

hardness level'.

5.2 How to set the water

hardness level

The appliance allows you to chose

between 7 levels corresponding to 7

different ranges of water hardness.

Depending on the country, the water

hardness is expressed in equivalent

scales: e.g. French degrees (°f), German

degrees (°d), English degrees (°e),

mmol/l and ppm.

If necessary, please contact your local

water authority to check the water

hardness in your area.

Check in the "Water hardness levels"

table which is the proper level.

To set the water hardness level:

1. Press the On/Off button for a few

seconds to activate the appliance.

2. Wait about 10 seconds for appliance

internal check.

3. Touch the Stains/Prewash and the

Plus Steam buttons simultaneously

(by touching the two buttons at the

same instant, as shown in the next

drawing) for some seconds until the

display shows the default level C04

and the indicator

goes on. It

means the water softener is active

during washing only.

ENGLISH

4. Touch repeatedly the Stains/Prewash

button until the desired level appears

(from C01 to C07).

5. Touch the Start/Pause button to

confirm your choice and exit the

menu.

How to set the water softener

also during rinse phase

The factory setting allows to soften the

water during washing phase only. This

setting satisfies most of the use

condition. However, if the inlet water is

particularly hard (C06 and C07 levels),

we suggest to set the water softener also

during rinsing phase to preserve the

fabric softness.

Once you have entered the menu by

pressing Stains/Prewash and the Plus

Steam buttons:

1. Touch the Plus Steam button. The

goes on.

This setting increases

the salt consumption.

2. Touch the Start/Pause button to

confirm your choice and exit the

menu.

How to deactivate the water

softener

Once you have entered the menu by

pressing Stains/Prewash and the Plus

Steam buttons:

1. By touching the Plus Steam button

twice, the water softener is excluded

completely. The indicator

and

go off and the appears in

the display.

2. Touch the Start/Pause button to

confirm your choice and exit the

menu.

Water hardness levels

Levels Water hardness range

°f

(French de-

grees)

°d

(German de-

grees)

°e

(English de-

grees)

mmol/l ppm

C01 ≤5 ≤3 ≤ 4 ≤0.5 ≤ 50

C02 6 - 13 4 - 7 5 - 9 0.6 - 1.3 60 - 130

C03 14 - 21 8 - 11 10 -15 1.4 - 2.1 140 - 210

C04

22 - 29 12 - 16 16 - 20 2.2 - 2.9 220 - 290

C05 30 - 37 17 - 20 21 - 26 3.0 - 3.7 300 - 370

C06 38 - 45 21 -25 27 - 32 3.8 - 4.5 380 - 450

C07 ≥46 ≥26 ≥33 ≥4.6 ≥460

Factory setting, able to satisfy most of the use conditions.

www.aeg.com14

5.3 Pouring salt

The water softener function acts through

special resins present in the appliance.

To regenerate the resins and make them

ready to soften the water pour a special

salt in the compartment

Salt

1. Open the detergent dispenser.

▼

Salt

2. Open the compartment

Salt

Max

▼

Max

▼

3. Pour the special salt.

Max

▼

Max

▼

Max

▼

SALT

4. Close the salt compartment and the

detergent dispenser.

Regularly check if there is

enough salt.

The compartment

Salt

can contain about

600 gr of salt that are sufficient for about

20 - 300 washing cycles (or 4 - 70 weeks)

depending on the set water hardness

level and whether the water softener is

activated during wash phase only. If the

water softener is activated also during

rinse phase, the salt refilling lasts 5 - 80

washing cycles (or 1 - 18 weeks)

depending on the set water hardness

level. Refer to 'How to set the water

hardness level'.

The display shows the indicator

when

compartment

Salt

needs to be refilled

with salt, even if a little salt still remains.

WARNING!

Pour the salt in the

compartment

Salt

only.

WARNING!

Do not put anything but salt

in the compartment

Salt

. If

any other detergent/additive

is poured inadvertently in

this compartment, please

refer to 'Eliminating

detergent or other additives

from salt compartment' in

'Troubleshooting' chapter.

Only use special salt for

dishwasher and/or washing

machine. The proper salt can

be ordered form the web

site!

Other types of salts are less

efficient and over time could

damage the water softener

technology permanently. Do

not use fine salt!

The appliance works

normally even without salt,

but without exploiting its full

potential. If you use the

appliance without salt for a

long time, once the salt is

finally refilled, the water

softener function is

completely restored after a

few long washing cycles.

ENGLISH 15

6. BEFORE FIRST USE

During installation or before

first use you may observe

some water in the appliance.

This is a residual water left in

the appliance after a full

functional test in the factory

to ensure the appliance is

delivered to customers in

perfect working order and is

no cause for concern.

1. Make sure that all transit bolts have

been removed from the appliance.

2. Make sure that the electrical power is

available and the water tap is open.

3. Make sure that there is salt in the

compartment marked by

Salt

and set

the proper water hardness level.

Refer to "How to set the water

hardness level".

4. Pour 2 litres of water into the

detergent compartment marked by

This action activates the drain system.

5. Pour a small quantity of detergent

into the compartment marked by

6. Set and start a programme for cotton

at the highest temperature without

any laundry in the drum.

This removes all possible dirt from the

drum and the tub.

7. CONTROL PANEL

7.1 Control panel description

612 11 10 8

7913

Programme dial

Display

Energy saving touch button (Eco)

Time saving touch button (Time

Save)

Skipping phase touch button

(Option)

• Wash phase skipping (Only Rinse)

• Wash and rinse phase skipping

(Spin only)

• Only drain (Drain only)

Start/Pause touch button (Start/

Pause)

Extra rinse touch button (Extra Rinse)

www.aeg.com16

Delay start touch button (Delay Start)

Super steam touch button (Plus

Steam)

Anti-stain and prewash touch button

(Stains/Prewash)

Spin reduction touch button (Spin)

On/Off push button (On/Off)

Temperature touch button (Temp.)

7.2 Display

MIX

Maximum load indicator. The icon flashes during laundry load esti-

mation (refer to "PROSENSE load detection" paragraph).

Maximum laundry indicator. It flashes when the laundry load exceeds the

maximum declared load of the selected programme.

Salt refilling indicator. The compartment

Salt

needs salt refilling: the com-

partment is empty or the salt is not enough.

Delay start indicator.

Door locked indicator.

The digital indicator can show:

• Programme duration (e. g. ).

• Delay time (e. g. or ).

• Cycle end ( ).

• Warning code (e.g. ).

Energy saving indicators. The indicator appears by selecting a pro-

gramme for cotton at 40 °C or 60 °C.

Washing phase indicator: it flashes during prewash and wash phase.

Rinsing phase indicator: it flashes during rinse phase.

ENGLISH 17

The indicator appears when the Soft Plus option is activated.

Spin and drain phase indicator. It flashes during spin and drain phase.

MIX

OKO MIX indicator.

Steam phase indicator.

Anti-crease phase indicator.

Child safety lock indicator.

Time saving indicator.

Temperature indicator. The indicator appears when a cold wash is

set.

Spin speed indicator.

Rinse hold indicator.

Quiet indicator.

Pre-wash indicator.

Stain indicator.

Extra rinse indicator.

8. DIAL AND BUTTONS

8.1 On/Off

Pressing this button for a few seconds

allows to activate or deactivate the

appliance. Two different tunes sound

while switching the appliance on or off.

As the Stand-by function automatically

deactivates the appliance to decrease

the energy consumption in a few cases,

you may need to activate the appliance

again.

For more details, refer to Stand-by

paragraph in Daily Use chapter.

8.2 Introduction

The options/functions are

not selectable with all

washing programmes. Check

the compatibility between

options/functions and

washing programmes in the

"Programme Chart". An

option/function can exclude

another one, in this case the

appliance doesn't allow you

to set the incompatible

options/functions together.

Make sure the screen and

touch buttons are always

clean and dry.

www.aeg.com

8.3 Temp.

When you select a washing programme,

the appliance automatically proposes a

default temperature.

Touch this button repeatedly until the

desired temperature value appears on

the display.

When the display shows the indicators

and , the appliance does not

heat the water.

8.4 Spin

When you set a programme, the

appliance automatically selects the

maximum spin speed.

Touch this button repeatedly to:

• Decrease the spin speed.

The display shows only

the spin speeds available

for the set programme.

• Activate the Rinse Hold option .

The water of the last rinse is not

drained out to prevent the fabrics

from creasing. The washing

programme ends with water in the

drum and the final spin phase is not

performed.

The display shows the indicator .

The drum turns regularly to reduce

creasing.

The door stays locked. The drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

Touch Start/Pause button: the

appliance performs the spinning

phase and drains the water.

• Activate the Quiet option.

All spinning phases (intermediate spin

and final spin) are suppressed and the

programme ends with water in the

drum. This helps to reduce creasing.

As the programme is very quiet, it is

suitable for use at night time when

cheaper electricity tariffs are available.

In some programmes the rinses are

performed with more water.

The display shows the indicator .

The door stays locked. The drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

Touch the Start/Pause button: the

appliance performs only the draining

phase.

The appliance empties the

water out automatically after

approximately 18 hours.

8.5 Stains/Prewash

Press this button repeatedly to activate

one of the two options.

The relevant indicator goes on in the

display.

• Stains

Select this option to pre-treat heavily

soiled or stained laundry using stain

remover.

Pour the stain remover into

compartment

. The stain remover

is pre-mixed and heated with

detergent in order to improve its

effectiveness.

This option can increase

the programme duration.

This option is not

available with a

temperature lower than

40 °C.

• Prewash

Use this option to add a prewash

phase at 30 °C before the washing

phase.

This option is recommended for

heavily soiled laundry, especially if

containing sand, dust , mud and other

solid particles.

Put the detergent for

prewash in a dosing ball

inside the drum.

This option can increase

the programme duration.

These two options cannot

be set together.

ENGLISH 19

8.6 Extra Rinse

With this option you can add up to 3

rinses accordingly to the selected

washing programmes.

Useful for people allergic to detergents

and with sensitive skin.

The

indicator shows the selected

number of rinses.

This option increases the programme

duration.

If the Extra Rinse is set as a

default option and you

select a compatible washing

programme, the display

shows . In this case, by

pressing the Extra Rinse

button , it is possible to add

just one rinse.

8.7 Plus Steam

This option adds a steam phase followed

by a short anti-crease phase at the end

of the washing programme.

The steam phase reduces fabric creasing

and facilitates the fabric ironing.

The indicator flashes on the display

during steam phase.

This option can increase the

programme duration.

When the programme stops the display

shows a zero

, the indicator is

steady on and the indicator starts

flashing. The drum performs smooth

movements for about 30 minutes to keep

the steam benefit. By touching any

button the anti-crease movements stop

and the door unlocks.

A small laundry load helps to

reach better results.

8.8 Eco

The Eco option reduces the energy

consumption maintaining good washing

results.

Set this option for slightly or normally

soiled items washed at 30°C or higher

temperatures.

Water and energy consumption may

depend on different causes, such as

water pressure, its hardness and

temperature, ambient temperature, type

and quantity of laundry, the set options,

spin speed and voltage fluctuations in

the electricity network. The display shows

the indicator .

If you select the Cotton

programme at 40°C or 60°C

and no other options are set,

the display shows the

indicator ; these are

the standard cotton

programmes, the most

efficient programmes in

terms of combined energy

and water consumption.

8.9 Time Save

With this option you can decrease the

programme duration.

• If your laundry is normally or lightly

soiled, it may be advisable to shorten

the washing programme. Touch this

button once to decrease the duration.

• In case of smaller load, touch this

button twice to set an extra quick

programme.

The display shows the indicator .

This option can also be used

to shorten the Steam

programme duration.

8.10 Skipping phase button

(Option)

By touching this button you can set:

• Only Rinse at first touch. The washing

programme starts from the rinsing

phase by skipping the wash phase.

All set options (except

permanent extra rinse)

are deselected

automatically.

• Spin only at second touch. The

appliance skips wash and rinse phase.

www.aeg.com

Page is loading ...

AEG L9FSC969R User manual

Brand: AEG

Model: L9FSC969R

Category: Washing machines

Type: User manual

Download PDF

report

AEG L9FSC969R User manual

AEG L9FSC969R User manual

Related papers

Other documents