Panasonic CYVMD9000U Operating instructions
- Category
- CD players
- Type
- Operating instructions
Panasonic CYVMD9000U
The Panasonic CYVMD9000U is a versatile and feature-rich device that combines a DVD/Video CD/CD player with a high-resolution display. Here are some of its key capabilities:
- Adjustable Display: The display can be tilted, adjusted front-to-back, and folded down temporarily, allowing you to find the perfect viewing angle.
- DVD Playback: The CYVMD9000U can play DVDs, Video CDs, and CDs, providing a wide range of entertainment options.
- DVD Menu Navigation: Easily navigate DVD menus and select content, audio, subtitles, and more using the remote control.
- Repeat and Slow Playback: Repeat specific sections or entire discs, and slow down playback for a closer look at details.
Panasonic CYVMD9000U
The Panasonic CYVMD9000U is a versatile and feature-rich device that combines a DVD/Video CD/CD player with a high-resolution display. Here are some of its key capabilities:
- Adjustable Display: The display can be tilted, adjusted front-to-back, and folded down temporarily, allowing you to find the perfect viewing angle.
- DVD Playback: The CYVMD9000U can play DVDs, Video CDs, and CDs, providing a wide range of entertainment options.
- DVD Menu Navigation: Easily navigate DVD menus and select content, audio, subtitles, and more using the remote control.
- Repeat and Slow Playback: Repeat specific sections or entire discs, and slow down playback for a closer look at details.
E
N
G
L
I
S
H
10
CY-VMD9000U
25
E
N
G
L
I
S
H
9
CY-VMD9000U
24
General
Press and hold [TILT] on the display unit
for more than 1 second.
Press ["] or [#] to adjust the tilt angle.
Press [%] or [$] to move the display to
the front or rear position.
1
Cautions:
≥ For smooth adjustment, make sure to first return the lateral angle to the neutral position and then adjust
the tilt angle.
≥ Do not manually change the position of the unit by using force.
≥ Do not place any object on the display unit, or subject it to undue force.
Notes:
≥ Press [MODE] to return to the regular mode.
≥ The monitor position setting menu is automatically closed if no operation is performed for about 60 seconds.
≥ Vertical angle (TILT) and front-rear position data are saved in the memory, so when the display unit is drawn
out next, it is automatically set at the angle and in the position adjusted before.
≥ After adjusting its angle, also adjust the brightness to make it easy for you to watch. (➡ page 54)
≥ The monitor position can also be set on the main menu screen. (➡ page 44)
≥ The car model and installation conditions may impose some restrictions on the adjustment of the monitor’s
angle and position.
Monitor position setting menu
Display Open/Close
OPEN: Press (OPEN/CLOSE).
If the unit stops halfway, press
(OPEN/CLOSE) again and
draw it all the way in.
CLOSE: Press (OPEN/CLOSE) again.
(After return the lateral angle to the neutral
position.)
Power
Turn the key in the ignition until the accessory
indicator lights.
ON: Press [MODE] (POWER) on the display
unit.
Press [PWR] or [MODE] on the remote
control.
OFF: Press and hold [MODE] (POWER) again
for more than 2 seconds on the main
unit.
Press and hold [PWR] again or [MODE]
again for more than 2 seconds on the
remote control.
Volume
["] (VOLUME): Up
[#] (VOLUME): Down Setting range: 0 to 40
Note:
≥ The sound level for each source is stored
in memory.
Mute
MUTE ON: Press [MUTE].
MUTE OFF: Press [MUTE] again.
Mode
Press [MODE] to change the mode.
Monitor Position Adjustment
Tilt Angle/Front-Rear Position
≥ Position
“REAR” and the tilt angle “5”
cannot be selected at the same time.
Display Unit Lateral Angle Adjustment
Hold the display unit by the non-slip part in the upper half of
it, and adjust its lateral angle.
Caution:
≥ There is the danger of your fingers being pinched if
you hold the unit by lower part. Hold the unit by the
upper half of it, and move it carefully without apply-
ing undue force.
Folding down the Display Temporarily
Fold down: Press [TILT] on the display unit.
Raise: Press [TILT] again on the display unit.
Note:
≥ Even when the unit is power off, you can fold down the display temporarily.
1
2
2
POWER
P•MODE
[]
(OPEN/CLOSE)
[MUTE]
[#] ["]
(VOLUME)
VOLUME
MENU
MUTE
MODE
NAVI
NAVIGATION
ASPECT
OPEN/CLOSE
ASP
ENTER
TILT
ACC
ON
[]
[]
TILT
[]
WARNING:
Do not insert hands, fingers or foreign objects into the unit while the display is moving.
Inserting your hands, fingers or foreign objects into the unit can cause injuries and damage to the unit.
VTR 1
VTR 2
DVD (Video CD/CD) player
Source
( page 38)
( page 38)
( page 26)
Radio
CD changer control
( page 34)
( page 32)
*
*
(When a CD changer is connected.)
*When connecting to CA-TU7000U/9000U.
P
•
M
O
D
E
[MODE]
[PWR]
["] [#]
VOL
[MUTE]
["] [#]
[%] [$]
(MONITOR
POSITION
ADJUSTMENT)
FrontRear
[%][$]
1 to 5
["][#]
Tilt angle Front-rear position
When using CY-VMD9000U itself:
Supplied speaker volume
When connecting to CA-TU7000U:
External speaker volume connected to this unit
Notes:
≥ When the display unit is opened or closed, a loud beep
sounds three times.
≥ Opening/closing the display can be operated when the
power is turned off.
View from above
E
N
G
L
I
S
H
11
CY-VMD9000U
26
Basic Disc Operations
E
N
G
L
I
S
H
12
CY-VMD9000U
27
Insert the disc.
≥ The mode that supports that disc is selected, and play-
back starts.
≥ The disc format is automatically identified. (➡ page 23)
≥ When the menu screen appears, see “Selecting a Menu
Item” on page 27.
To make sure the play setting
Press [ENTER] during the playback.
Stop and Disc Eject
Disc Insert and Playback
Mode Selection
Press [<] (EJECT) on the display unit.
Press [MODE] to change to the DVD (Video CD, CD) mode.
Notes:
≥Loading a disc when the power is off allows the power to
be turned on.
≥You can play a disc even if the monitor is closed.
≥If you leave a disc at the disc slot for approximately
30 seconds, the disc is loaded into the compartment
automatically after loud beep is energized three times.
≥The sound may be interrupted for a few moments while
the disc is being identified.
POWER
VOLUME
MENU
MUTE
MODE
NAVI
NAVIGATION
ASPECT
ASP
ENTER
[MODE]
[<] (EJECT)
[%] [$]
[#] ["]
[ENTER]
[MODE]
[%] [$] ["] [#]
[ENTER]
[DVD] (DVD MENU)
[RET] (RETURN)
[0] to [9]
(SELECT MENU)
P
•
M
O
D
E
[:]
[9]
Only for the remote control
Label side
Insert a disc after making sure that there is no disc in the disc compartment.
(If “NO DISC” is displayed, insert the disc.)
Cautions:
≥Do not use irregularly shaped disc.
≥Do not insert foreign matter into the disc slots.
Selecting a Menu Item
DVD:
Press [%], [$], [#] or ["] to select the desired menu.
DVD/video CD with playback control (➡ page 89):
Press [0] to [9] on the remote control.
Press [ENTER].
Some DVD discs have unique menu structures called DVD menu.
Although the DVD menu’s contents and operation differ from disc to
disc, the following explains basic operation when this feature is used.
To display the menu:
DVD: Press [DVD] (DVD MENU) during playback.
Video CD: Press [RET] (RETURN) during playback.
To input the number again or return to the previous display:
Press [RET] (RETURN).
Note for video CD with playback control:
≥Pressing [:] [9] during playback will return to the menu display.
1
2
DVD MENU
1. SUBTITLE
2. AUDIO
3. ANGLE
Example:
DVD
VIDEO
VIDEO
CD
Perform these operations with the remote control.
Operations vary according to the disc.
For details, refer to the guide provided with the disc.
1. Love Supremes
2. Impressions
3. In a Sentimental Mood
Select your favorite music.
Number:
Video CD
Example:
Meaning of symbols
Indicates the compatible types of disc.
DVD
VIDEO
VIDEO
CD
CD
Notes:
≥Disc Limitations
Due to limitations of certain discs, some DVD video and video CD discs may not operate as described in
these Operating Instructions. Refer to the disc jacket for further details.
≥This unit does not support DVD and video CD karaoke functions.
DVD mode display
Play setting
Disc format
(➡ page 23)
Playing time
Title/chapter number
Subtitle language/audio language/angle
Input is not possible when the operation is
not supported by the disc.
Mode display
Video CD mode display
Play setting
Sound setting
(Stereo/monaural)
Playing time
Track number
Mode display
E
N
G
L
I
S
H
13
CY-VMD9000U
28
Basic Disc Operations (Continued)
E
N
G
L
I
S
H
14
CY-VMD9000U
29
1
Only for the remote control
Input preferred title/chapter
number.
To input the number again:
Press [RET] (RETURN).
Press [TITLE] (TITLE/CHAPTER).
≥Playback will start automatically.
Notes:
≥ If no operation is performed, the display returns to the regular
mode.
≥You can select the desired setting on the menu display. (➡ See
below.)
Press [%], [$], [#] or ["] to select
the preferred menu.
Note:
≥Operations vary according to the disc. For details, refer to the guide
provided with the disc.
Note:
≥Operations vary according to the disc. For details, refer to the guide
provided with the disc.
Press [ENTER].
Starting Playback
from a Specific
Title/Chapter
DVD Menu
Use this menu during
playback to select content,
audio, subtitle, etc., from a
menu (the DVD menu)
that is unique to each disc.
Press [TITLE] (TITLE/CHAP-
TER) to select the input mode.
Press [DVD] (DVD MENU) during
playback.
Press [%], [$], [#] or ["] to select
the preferred title.
Press [ENTER].
Title Menu
If the DVD has multiple
titles recorded on it, it is
possible to select the pre-
ferred title form the title
menu to start playback.
Press and hold [DVD] (DVD MENU)
for more than 2 seconds during play-
back.
DVD MENU
1. SUBTITLE
2. AUDIO
3. ANGLE
Example:
Regular mode
Chapter number input mode
Title number input mode
(“CHAP” lights on yellow.)
(“TITLE” lights on yellow.)
TITLE MENU
Rivers Castles
Lovers Woods
Example:
2
3
1
2
3
1
2
3
DVD
VIDEO
DVD
VIDEO
DVD
VIDEO
Note:
≥It is possible to press [%][$] on the display unit instead of [:][9] on the remote control except the
DVD
’s menu play.
Stop
Pause
Slow Playback
Press [∫] (STOP) during playback.
≥When play is stopped, the player records the point where [∫]
(STOP) was pressed. (Continued playback function)
Press [1] (PLAY) again, and play will resume from this point.
To cancel continued playback:
Press [∫] (STOP) again in the stop mode.
Press [
[ [
] (PAUSE) during playback.
To resume normal playback:
Press [1] (PLAY) or [
[ [
] (PAUSE) again.
Press and hold [9] for more than 0.5 seconds in the pause mode.
≥Playback is at about 1/3 normal speed.
To resume normal playback:
Press [1] (PLAY).
To pause:
Press [
[ [
] (PAUSE) again.
Note:
≥Reverse slow playback is not possible.
Repeat
Press [REP] (REPEAT) during playback.
Press [REP] (REPEAT) again to cancel.
Chapter/
Track
Press and hold [REP] (REPEAT) for more than
2 seconds during playback.
Press and hold [REP] (REPEAT) for more than
2 seconds again to cancel.
Title
[∫] (STOP)
[
[ [
] (PAUSE)
[1] (PLAY)
[:] [9]
[%] [$] ["] [#]
[ENTER]
[DVD] (DVD MENU)
[RET] (RETURN)
[0] to [9]
(TITLE/CHAPTER NUMBER)
P
•
M
O
D
E
[REP] (REPEAT)
[TITLE]
(TITLE/CHAPTER)
Go to Beginning
Fast Forward/
Fast Backward
[9]: Next track (chapter)
[:]: Beginning of the current track (chapter)
Previous track (Press twice.)
Note:
≥When playing a DVD video, there are cases where it is not possible
to return to the start of a chapter that spans 2 titles.
Press and hold for more than 0.5 seconds.
[9]: Fast forward
[:]: Fast backward
Release to resume the regular play on the regular speed.
≥The speed changes if the button is held down as follows.
Regular speed > 1.5 times > 10 times > 20 times
Listening to DVD/Video CD
To return the previous display:
Press [RET] (RETURN).
To return the previous display:
Press [RET] (RETURN).
E
N
G
L
I
S
H
16
CY-VMD9000U
31
E
N
G
L
I
S
H
15
CY-VMD9000U
30
Basic Disc Operations (Continued)
Switching the
Subtitle Language
Press [SUB] (SUB TITLE) during playback.
It is possible to change the subtitle language during play if the multi-
ple languages are recorded on the disc.
Switching the
Audio Language
Press [AUDIO] during playback.
It is possible to change the audio language during play if multiple
audio languages are recorded on the disc.
Switching the
Angle
Press [ANGLE] during playback.
For DVDs which contain scenes which have been shot simultaneous-
ly from a number of different angles the same scene can be viewed
each of these different angles during play.
Switching between
Stereo and
Monaural
Press and hold [0] (ST/MONO) for more than 2 seconds.
It is possible to switch the audio between stereo sound and monaural
sound (L or R).
Notes:
≥ If no operation is performed for 5 seconds, the display returns to the regular mode.
≥It may not be possible to switch language unless the unit is at the DVD menu (➡ page 29) or is at the DVD set-
tings (➡ page 56).
≥The language on the DVD settings has a priority over when the power is turned on or the disc is loaded.
≥The number of languages depends on the disc. Some disc have only one language or have no language.
Note:
≥ There may be a brief delay before the subtitles appear.
: The left channel audio is output on both the left
and right speakers.
: The right channel audio is output on both the left
and right speakers.
DVD
VIDEO
DVD
VIDEO
DVD
VIDEO
VIDEO
CD
ST
MONO Lch
MONO Rch
: Stereo sound
[%] [$]
[0] (ST/MONO)
[SUB] (SUB TITLE)
[AUDIO]
[ANGLE]
[REP] (REPEAT)
P
•
M
O
D
E
Only for the remote control
CD mode display
Track number
Playing time
Play setting
“OVER 1” shows when the number
of tracks is 21 or more.
Number of track
Go to Beginning
Fast Forward/
Fast Backward
[$]: Next track
[%]: Beginning of the current track
Previous track (Press twice.)
Press and hold.
[$]: Fast forward
[%]: Fast backward
Release to resume the regular play.
Repeat
Press [REP] (REPEAT) during playback.
Press [REP] (REPEAT) again to cancel.
Listening to CD
Mode display
E
N
G
L
I
S
H
17
CY-VMD9000U
32
CD Changer Basics
E
N
G
L
I
S
H
18
CY-VMD9000U
33
CD changer functions are designed for optional Panasonic CD changer unit.
Preparation:
≥Connect the CD changer, and load a magazine (disc).
Notes:
≥Loading a magazine when the power is off allows the power to be turned on.
≥Ejecting the magazine when the unit is in the CD changer mode allows the power to be turned off.
Track Search
Press and hold for more than 0.5 seconds.
[$] (TRACK): Fast forward
[%] (TRACK): Fast backward
Release to resume the regular play.
CD Changer Mode
Press [MODE] to change to CD changer mode
and playback starts.
Disc Selection
["] (DISC): Next disc.
[#] (DISC): Previous disc.
Track Selection
[$] (TRACK):Next track.
[%] (TRACK):Beginning of the current track.
Previous track (Press twice.)
1
2
3
Various Way of Listening (Only for the Remote Control)
Random Play
Track
Disc
Scan Play
Track
Disc
Repeat Play
Track
Disc
Press [4] (RANDOM).
All the available tracks on all discs in the magazine plays in a
random sequence.
≥Press [4] (RANDOM) again to cancel.
Press and hold [4] (RANDOM)
for more than 2 seconds.
All the available tracks on the current disc plays in a random
sequence.
≥Press and hold [4] (RANDOM) again to cancel.
Press [5] (SCAN).
The first 10 seconds of each track on the discs plays in
sequence.
≥Press [5] (SCAN) again to cancel.
With the scanning of all tracks over, the original program starts
playing form the beginning.
Press and hold [5] (SCAN)
for more than 2 seconds.
The first 10 seconds of the first track of all the discs in the maga-
zine plays in sequence.
≥Press and hold [5] (SCAN) again to cancel.
With the scanning of all tracks over, the original disc starts
playing from the beginning.
Press [6] (CH REPEAT).
Repeat the current track.
≥Press [6] (CH REPEAT) again to cancel.
Press and hold [6] (CH REPEAT)
for more than 2 seconds.
Repeat the current disc.
≥Press and hold [6] (CH REPEAT) again to cancel.
[MODE]
["] [#] (DISC)
[%] [$] (TRACK)
[4] (RANDOM)
[5] (SCAN)
[6] (CH REPEAT)
P
•
M
O
D
E
Note:
≥Load a magazine with CDs when “NO MAGA-
ZINE” is displayed.
When connecting to CA-TU7000U/9000U
CD changer mode display
Track number*
1
Playing time
Play setting
“OVER 1” shows when the number
of tracks is 21 or more.
Disc number
Number of disc in
CD changer
Caution:
≥Do not use irregularly shaped disc.
VOLUME
MENUMUTE MODE NAVI
NAVIGATION ASPECT
POWER
ASP
ENTER
DISC/BAND
TRACK/
TUNE
P•MODE
Mode display
*
1
Not shown correctly when the num-
ber of tracks is 100 or more.
Number of track
E
N
G
L
I
S
H
20
CY-VMD9000U
35
E
N
G
L
I
S
H
19
CY-VMD9000U
34
Radio
Radio Mode
Press [MODE] to change to radio mode.
Band
["] (BAND): FM band
[#] (BAND): AM band
Tuning
[$] (TUNE): UP
[%] (TUNE): Down
Press and hold [$] (TUNE) or [%] (TUNE) for more
than 0.5 seconds, then release. Seeking will start.
1
2
3
When connecting to CA-TU7000U/9000U
Radio mode display
Band
Stereo indicator
Frequency
Preset memory
Note:
≥The stereo indicator lights during reception of an FM stereo
broadcast.
One-Touch Selection of a Station
Manual Preset
Memory
Manually save a station in the
preset memory.
1 Select a band and frequency (step 1, 2 and 3 on the previ-
ous page).
2 Press and hold [1] to [6] on the remote control for more than
2 seconds.
The frequency blinks once,
and a receiving station is
saved in the memory.
Auto Preset Memory
Automatically save strong
stations in the preset memo-
ry.
1 Select a band (step 1 and 2 on the previous page).
2 Press and hold [ENTER] for more than 2 seconds.
≥The 6 strongest available stations will be automatically saved in
the memory under preset numbers 1 to 6.
≥Once set, the preset stations are sequentially scanned for 5 sec-
onds each.
≥To stop scanning, press [1] to [6] on the remote control.
Note:
≥New stations are overwritten on existing saved stations after following this procedure.
Preset Station
Calling
1 Select a band (step 1 and 2 on the previous page).
2 Press [1] to [6] on the remote control.
VOLUME
MENUMUTE MODE NAVI
NAVIGATION ASPECT
POWER
ASP
ENTER
DISC/BAND
TRACK/
TUNE
P•MODE
[MODE]
["] [#] (BAND)
[%] [$] (TUNE)
[ENTER]
[1] to [6]
(PRESET MEMORY)
P
•
M
O
D
E
Mode display
Up to 6 stations each can be saved in the FM1, FM2, AM1 and AM2 preset station memories.
E
N
G
L
I
S
H
22
CY-VMD9000U
37
E
N
G
L
I
S
H
21
CY-VMD9000U
36
Useful Functions
Private Mode
Default: OFF
VOLUME
MENUMUTE MODE NAVI
NAVIGATION ASPECT
POWER
ASP
ENTER
[ASP] (P MODE)
•
DISC/BAND
TRACK/
TUNE
P•MODE
[A] (P MODE)
•
P
•
M
O
D
E
When connecting to
CA-TU7000U/9000U
You can mute the sound from the rear speakers connect-
ed to the front monitor (this unit), when you have different
modes at the front and rear monitor, after connecting the
rear monitor.
You can enjoy the sound from the rear monitor by using
headphones.
Private mode ON: Press and hold [ASP] (P • MODE) for more than 2 seconds on the display unit.
Press and hold [A] (P • MODE) for more than 2 seconds on the remote control.
Private mode OFF:Press and hold [ASP] (P • MODE) again for more than 2 seconds on the display
unit.
Press and hold [A] (P • MODE) again for more than 2 seconds on the remote con-
trol.
“P • MODE” indicator lights when
the private mode is activated.
Notes:
≥Be sure to set to OFF when you do not use the private mode.
≥It is not possible to choose and set the BAL/FAD on the sound setting menu while private mode is
activated when connecting to CA-TU7000U.
≥It is not possible to choose and set the SP SET UP/SP DELAY on the sound setting menu while pri-
vate mode is activated when connecting to CA-TU9000U.
≥When MAIN-IN is set to ON, private mode will be inactivated.
E
N
G
L
I
S
H
00
CY-VMD9000U
39
E
N
G
L
I
S
H
23
CY-VMD9000U
38
Useful Functions (Continued)
E
N
G
L
I
S
H
24
Press [MODE] to change to the VTR1 or VTR2 mode.
Select the same mode (VTR1 or VTR2) as the terminal that
is connected to a VCR or camcorder (VTR1-IN or VTR2-
IN).
Shift the transmission gear into the reverse position.
≥The display shows a picture from the rear view camera.
Press and hold [MENU] for more than 2 seconds.
Notes:
≥You can see a picture from the rear view camera even if
the power of the display unit is inactivated.
≥You can see a picture from the rear view camera if you
change the mode to the same one (VTR1 or VTR2) as
the terminal to which the rear view camera was con-
nected (VTR1-IN or VTR2-IN).
Press [$] or [%] to select an item.
: Picture and sound come out. These are in
the same mode as the front monitor (this
unit).
: Picture and sound in the VTR1 mode
always come out.
: Picture and sound in the VTR2 mode
always come out.
: Picture and sound in the DVD player mode
(disc in this unit) always come out.
≥ Only sound in the CD player mode.
Press [ENTER] to set.
Notes:
≥Press [MODE] to return to the regular mode.
≥The display returns to the previous one with no operation for 60 seconds after changing to the rear
monitor setting menu.
≥Picture and sound from the car navigation system connected to an RGB input cord are not available
at the rear monitor.
≥Radio and CD changer mode is not available at the rear monitor when connecting to CA-
TU7000U/9000U.
≥You can mute the sound from the rear speakers connected to the front monitor (this unit), so that
you can have different modes at the front and rear monitor. (➡ page 36)
AUTO
VTR1
VTR2
DVD
VTR1-IN VTR2-IN
(Example)
Camcorder
CY-VMD9000U
Control unit
VCR
P
a
n
a
s
o
n
i
c
(Example)
Rear view camera
CY-VMD9000U
Control unit
VTR1-IN VTR2-IN
1
2
3
VIDEO-OUT
CY-VMD9000U
Control unit
Rear monitor
(CY-VM5800U)
(Example)
VTR-IN
VCR/Camcorder
Preparation:
≥ Connect a VCR or camcorder.
(➡ page 77)
Rear View Camera
Preparation:
≥ Connect a rear view camera and a reverse
lead. (➡ page 79)
≥ Select a terminal in the “CAMERA IN”
screen according to the terminal actually
connected to the rear view camera.
(➡ page 48)
Rear Monitor
You can have different picture or sound at the
front and rear monitor at the same time.
Default: AUTO
Preparation:
≥ Connect another monitor. (➡ page 77)
VOLUME
MENUMUTE MODE NAVI
NAVIGATION ASPECT
POWER
ASP
ENTER
[MODE] [%] [$]
(SELECT)
[ENTER]
[MENU]
DISC/BAND
TRACK/
TUNE
P•MODE
[MODE] [MENU]
[%] [$]
(SELECT)
[ENTER]
P
•
M
O
D
E
Rear monitor setting menu
E
N
G
L
I
S
H
00
CY-VMD9000U
41
E
N
G
L
I
S
H
25
CY-VMD9000U
40
Useful Functions (Continued)
E
N
G
L
I
S
H
26
Car Navigation
Preparation:
≥ Connect a car navigation system.
≥ Select a terminal in the “NAVI SETUP”
screen according to the terminal actually
connected to the car navigation system.
(➡ page 46)
VOLUME
MENUMUTE MODE NAVI
NAVIGATION ASPECT
POWER
ASP
ENTER
[MODE] [NAVI] (NAVIGATION)
P•MODE
DISC/BAND
TRACK/
TUNE
[MODE][NAVI] (NAVIGATION)
P
•
M
O
D
E
When you connect a car navigation system
through RGB cord [Panasonic car navigation
(not available yet)]:
Car navigation ON: Press [NAVI] (NAVIGATION).
Car navigation OFF: Press [NAVI] (NAVIGATION) again.
Notes:
≥When you connect a Panasonic car navigation system
with a built-in DVD player, use an RGB cord as well.
≥The sound that a Panasonic car navigation system gen-
erates comes from the speakers supplied with CY-
VMD9000U/CY-VMC7000U.
When you connect a car navigation system to
VTR1-IN or VTR2-IN terminal (other brand’s
car navigation system):
Car navigation ON: Press [NAVI] (NAVIGATION).
Car navigation OFF: Press [NAVI] (NAVIGATION) again.
Or press [MODE] to change to the VTR1 or VTR2 mode.
Select the same mode (VTR1 or VTR2) as the terminal that
connected to a car navigation system (VTR1-IN or VTR2-
IN).
(Example)
Panasonic car
navigation system
DVD video/audio
output
RGB: car navigation
VTR1-IN VTR2-IN
CY-VMD9000U
Control unit
RGB input cord
CY-VMD9000U
Display unit
(Example)
Other brand’s car
navigation system
CY-VMD9000U
Control unit
VTR1-IN VTR2-IN
E
N
G
L
I
S
H
00
CY-VMD9000U
43
E
N
G
L
I
S
H
27
CY-VMD9000U
42
Useful Functions (Continued)
E
N
G
L
I
S
H
28
Normal (Default)
≥ The conventional display image has a 4 to 3
ratio of horizontal to vertical.
≥ In this case, a blank area remains on the
right and left sides of the display.
Full
≥ The screen is extended horizontally as a
whole to the aspect ratio of 16 to 9.
≥ The extension ratio is the same at any point
of the screen.
Press [ASP] (ASPECT) on the display unit or press [A] (ASPECT) on the remote control to change the
aspect ration as follows.
Notes:
≥This adjustment is common to VTR1/VTR2 and DVD (video CD) mode.
≥You cannot change the aspect in the menu screen and a screen in the CD mode. These are fixed to
“Full”.
≥The “Zoom” and “Just” screens do not apply to the car navigation images.
≥When the rear view camera is in operation with the transmission gear shift in the reverse position,
the image is shown on the “Full” screen only.
≥In some cases, the picture looks different from the original one due to your selection of aspect.
Cautions:
≥ This is to remind you that compression or extension of the screen using the aspect ratio (screen mode)
changing function of this product for commercial purpose of profit making or viewing/listening by the
public could infringe on the rights of the author protected by the copyright law.
≥ If you expand a normal picture (4 to 3) by using “Just”, “Zoom” or “Full” aspect the full of the screen, you
might not see the periphery of the picture, or you might see deformed picture. Therefore, use the
“Normal” mode to see the original picture as the author intended it.
Aspect Ratio
Default: Normal
Mode: 4 types
VOLUME
MENUMUTE MODE NAVI
NAVIGATION ASPECT
POWER
ASP
ENTER
[ASP] (ASPECT)
DISC/BAND
TRACK/
TUNE
P•MODE
[A] (ASPECT)
P
•
M
O
D
E
Zoom
≥ The screen is fully extended at the normal
aspect ratio of 4 to 3.
≥ The top and bottom of the screen are slight-
ly cut.
Just
≥ The screen is extended horizontally to the
aspect ratio of 16 to 9.
≥ The extension ratio increases toward the
right and left ends of the screen.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Panasonic CYVMD9000U Operating instructions
- Category
- CD players
- Type
- Operating instructions
Panasonic CYVMD9000U
The Panasonic CYVMD9000U is a versatile and feature-rich device that combines a DVD/Video CD/CD player with a high-resolution display. Here are some of its key capabilities:
- Adjustable Display: The display can be tilted, adjusted front-to-back, and folded down temporarily, allowing you to find the perfect viewing angle.
- DVD Playback: The CYVMD9000U can play DVDs, Video CDs, and CDs, providing a wide range of entertainment options.
- DVD Menu Navigation: Easily navigate DVD menus and select content, audio, subtitles, and more using the remote control.
- Repeat and Slow Playback: Repeat specific sections or entire discs, and slow down playback for a closer look at details.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Panasonic CYVMD9000U Operating instructions
-
-
-
-
-
-
-
-
-