Whirlpool AKZ 319/NB/02 User guide

Brand: Whirlpool

Model: AKZ 319/NB/02

Type: User guide

This manual is also suitable for

AKZ 319/IX/02

The Whirlpool AKZ 319/NB/02 offers a variety of functions to make cooking easier and more efficient. With its minute minder, you can set a timer for up to 3 hours and 59 minutes, perfect for keeping track of cooking times. The warm keeping function maintains a constant temperature of 60°C, ideal for keeping food warm until it's ready to serve. The dough proving function provides a constant temperature of 35°C, perfect for rising dough for bread, pizza, and pastries. The defrosting function helps to quickly and evenly thaw frozen foods.

$.=

352'8&7'(6&5,37,216+((7



6( 12 '. ), 3/ &= 6. +8 58 52 *%



$&&(6625,(6

&21752/3$1(/

5HWUDFWDEOHNQREV

2YHQIXQFWLRQFKDUW

&22.,1*7$%/()25*5,//)81&7,21

&22.,1*7$%/(6

Follow the instructions on the display

Displays

Remove the protective film, if present,

from the display.

Once the desired setting appears

on the display it can be confirmed

pressing the “OK” button and

the next step in the programming

can be carried out.

If the “<<“ cancel

button is pressed the

operation set is cancelled

and the previous screen is

restored.

The “-/+” browser knob has

different uses, depending on the

function chosen:

• For browsing through the

menus and the submenus

• For increasing/reducing the

indicated values

• For browsing through the

cooking functions

• For selecting the Turbogrill

option

• For increasing/reducing the

cooking time and temperature

• For browsing through the

memories

The Function knob is used to select the various oven functions. Each click

of the knob corresponds to a function:

Turn the

knob two clicks to

the left.

The message SETTINGS

APPEARS ON THE DISPLAY

Auto Recipes

Setting (set)

Special functions

-/+

If the display shows the message

“Demo Mode in progress”

, the

heating elements of the cavity are disconnected.

To exit the “Demo” mode and restore normal oven operation,

proceed as follows:

1. Disconnect the oven from the mains and reconnect it within 60

seconds:

2. turn the Functions knob to the “Lamp” position

3. press the “<<” button,

4. turn the Functions knob to the “0” - Stand by position,

5. Press the “OK” button.

To enter the “Demo” sequence, proceed in the same manner.

Child Safety with control panel lock

To activate or deactivate the “Child Safety Lock” press simultaneously

on the “<<“ and “OK” buttons for 5 seconds. If activated, the

functions of the knobs and the buttons are locked and the display

shows the

Request for confirmation when the settings are changed

If the Function knob is turned during a cooking cycle, the oven asks you

to confirm this choice so as to avoid accidental changes to the cooking

cycle settings.

If the knob is turned back to its original position the display will show

the settings for the cooking cycle being performed.

In any case, the oven continues with the cooking cycle until the user

confirms the change in settings.

AUTO OFF device

For safety reasons, the oven switches off automatically (except for the

Special function) after 4.5 hours of continuous operation.

To save energy in Stand By mode, press button “<<“ to deactivate

the display (display in OFF mode). To switch the display back on, press

the button “<<“ again.

To change a language that has been set mistakenly, proceed as follows:

1. Turn the Function knob to the “SETTINGS” position, turn to

Language and confirm by pressing the “OK” button.

2. Reselect the desired language using the “-/+” knob and confirm

pressing the “OK” button.

Description of control panel

Demo Mode

Safety Features

SETTINGS

Turn the knob two clicks to the left. The following message appears

on the display:

Reset brightness and

contrast settings

Set the Function

knob to OFF

Turn the Function

knob to settings

Press and hold “OK”

for 5 seconds.

Original factory

settings will be

restored.

* factory setting

language:

ENGLISH*

DEUTSCH

FRANCAIS

ITALIANO

ESPAÑOL

PORTUGUES

NEDERLANDS

SVENSKA

NORSK

DANSK

SUOMI

Restoring a language

Using the

Setting the clock

The clock appears on the display.

Highlight the desired time using the “-/+” knob and

confirm your choice pressing the “OK” button”.

Follow the instructions on the display

The minute minder can only be set when the oven is not in use and allows a maximum setting of 3 hours

and 59 minutes.

To set the minute minder:

1. Leave the Function knob at “0”.

2. Press the “OK” button: the “TIMER” flashes on the display.

3. Turn the “-/+” knob to set the desired time.

4. Press the “OK” button to confirm the setting.

The minute minder starts its countdown; when the set time has elapsed, an acoustic signal sounds and the

word “END” appears on the display”. If the “OK” confirmation button is pressed, the acoustic signal stops

and the time of day appears on the display.

In any case, the minute minder can be deactivated at any time pressing the “<<” button twice.

Selecting the cooking time/delayed start:

Cooking time can be selected in order to turn the oven for a specified period of time. The maximum

programmed cooking time is 3 hours and 59 minutes.

When the oven is on, press the OK button to set cooking time. The symbol appears on the display.

Turn the knob “-/+” to display the desired cooking time. Confirm by pressing the OK button.

At this point, end of cooking time can be set so that food is ready at the desired time.

Press the “OK” button, appears on the display. Turn the knob “-/+” to display the desired end of

cooking time.

Turn the Function knob to the memory mode position to access the 15 auto recipes. Select the desired

recipe by scrolling through the recipes with the “-/+” knob.

N.B

: at the end of the set cooking time, extra cooking time can be added

At the end of cooking, “+/-” ADD TIME appears on the display. Turn the “+/-” knob to prolong the

cooking time as desired.

The oven features 15 auto recipes.

After selecting a recipe, press the OK confirmation button to start cooking.

WARM KEEPING To maintain a constant temperature inside the oven

- 60°C : for heating food.

Ideally, the first shelf should be used.

Both cooking time and end of cooking time can be selected.

DOUGH PROVING To maintain a constant temperature inside the oven

- 35°C: to raise pasta, bread and pizza.

DEFROSTING Ideal for thawing frozen food at room temperature.

- The food should be placed in the oven in its wrapping to

prevent it from drying out.

CLEANING To facilitate oven cleaning:

- gradually pour up to 250 ml max. of water over the bottom

of the oven.

- leave the oven to cool, then clean with a damp sponge.

These functions are only available with the selection of cooking time and/or end of cooking time.

Keep Warm

This function is used to maintain an oven temperature of 60°C at the end of cooking.

After setting cooking time and end of cooking time, press the OK button during cooking and select the Keep

Warm function.

At the end of the desired time, return the Function knob to 0 to switch the oven off.

Extra browning

This function is used for browning food at the end of cooking time.

At the end of cooking, extra cooking time can be added, or the Extra browning function selected. This

function is preset to last 5 minutes: press button << to deactivate the function at any time.

Special functions

Minute minder

Auto Recipes

Additional Options with Manual Functions

Whirlpool AKZ 319/NB/02 User guide

Brand: Whirlpool

Model: AKZ 319/NB/02

Type: User guide

This manual is also suitable for

AKZ 319/IX/02

Download PDF

report

Whirlpool AKZ 319/NB/02 User guide

This manual is also suitable for

Whirlpool AKZ 319/NB/02 User guide

Related papers

Other documents