WARNING: NO PORTION OF THIS INSTRUCTION SHEET MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
Figure 1.
Introduction
Specifications
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL H8245
DOUBLE MINI ON/OFF
SWITCH
INSTRUCTIONS
To reduce risk of serious burns, electrocu-
tion or death when installing this switch:
• Only use this switch to replace an exist-
ing component switch that has the same
physical configuration and equivalent
electrical specifications/ratings.
• Installationmustonlybeperformedbyan
electrician or qualified service personnel,
and all applicable electrical codes must
be adhered to.
• Turn off and completely disconnect all
power sources to the component before
installing the switch.
• Onlyinstallthisswitchonthe"hot"wires.
Do not install it on the neutral or ground
wires. Otherwise, the component could
still be receiving live current even when
the switch is turned OFF.
• Do not use this switch in wet or damp
locations, or near explosive fumes or
flammable liquids. It is not sealed or rated
for these environments.
• Make sure there is a verified compo-
nent ground on the circuit this switch is
installed.
Installation
Figure 2
Hot
In
Hot
Out
ON
(|)
OFF
(O)
ON
(|)
OFF
(O)
HY39-2
Rear View of Switch
Component 1
Verified
Ground*
Verified
Ground*
Component 2
Power Source 1 Power Source 2
Figure 2.
This switch is intended to be connected to
stranded wire with insulated quick-discon-
nect crimp-type female wire terminals hav-
ing a
1
⁄4"tab.
Allcrimpsmustbe"pull-checked"toensure
that wires are securely crimped and will
not fall out with moderate tension or when
exposed to normal operation vibration.
-
1
-
2
Grizzly Switch h8245 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Grizzly Switch H8246 User manual
-
Grizzly G8988 Owner's manual
-
-
-
-
-
Grizzly Industrial G0808 Owner's manual
-
-
-
Grizzly Industrial H2936 Owner's manual
