2. Computers & electronics
  3. Projectors
  4. Projector lamps
  5. Seamax Marine
  6. 11001017 Bimini Rear Support Pole Set

Seamax Marine 11001017 Bimini Rear Support Pole Set User manual

  • Hello! I've reviewed the Seamax Bimini Rear Support Pole Set User Manual. This document details the features and installation of the 40 and 48 inch support poles, which are designed to provide enhanced stability for your boat's Bimini top. The manual covers aspects such as adjusting the length of the poles, materials used, and fittings included. I'm here to help answer any questions you might have about the system.
  • What is the purpose of the Seamax Bimini Rear Support Pole system?
    What material are the support poles made of?
    Can the length of the poles be adjusted?
    What is included in the parts checklist?
Distributor: Seamax Marine and Outdoor
102-19155 38 Ave, Surrey, BC V3Z0Y6, Canada
www.seamaxmarine.com [email protected]
Toll free: 1-877-907-7766 Tel: 604-277-7766
Seamax Bimini Rear Support Pole Set User Manual
This Bimini (Rear) Support Pole system is a great option for your Seamax Bimini top purchase. It will help your
Bimini top to stay with an angle position. It will make your boat Bimini top more convenience and professional.
The special Eye-End fitting offer a 360 Degree turning, making it more flexible for your installation either on the
inflatable or aluminum boat.
2 SIZES TO CHOOSE:
•Size 40 inches – Pole Length 40”, Designed for Seamax Bimini top Size A- C; Suitable for inflatable
boats up to 13ft and most Aluminum or fiberglass boat up to 18ft.
•Size 48 inches – Pole Length 48”, Designed for Seamax Bimini top Size D- F; Suitable for inflatable
boats up to 20ft and most Aluminum or fiberglass boat 18ft or up.
ITEM DESCRIPTION:
•Two 1” diameter marine grade aluminum pole with both end nylon fittings;
•Including universal fittings adapt to your existing Bimini Top and Boat;
•Provide the Bimini a stronger support and keep the Bimini standing up when folded;
•Designed for Seamax Bimini Top or the other brand with 1” or 7/8” diameter rounded pole;
•To adjust the length of poles, remove one side top cap before cut it shorter, install the cap back by rivets.
•You may only pick the necessary parts for using on your application, spare parts are included.
•2 Years Limited Warranty.
Parts check list: 2 x Aluminum Support Pole with both end fitting installed. 2 x Nylon deck mounting, 4 x Pole
Connector with wind nut, Stainless steel hardware, Aluminum rivet.
NOTE:
Seamax Boat Bimini (Rear) Support Pole system does not include Boat’s Pontoon Fitting Kit, we sell them
separately. This Rear Support Pole Set could be used as a repair kit of your existing Bimini top.
/