2. Siamp
  3. 99T series

Siamp 99T series Assembly Instructions

  • Hello, I have reviewed the provided assembly instructions for SIAMP 99T Low pressure inlet valves. The document outlines how to adjust the height and water levels and includes warnings about backflow prevention and avoiding the use of sealing paste. I am ready to answer any questions you have about the installation and use of these valves.
  • How do I adjust the water level?
    Is sealing paste allowed?
    What is minimum distance for inlet installation
INLET VALVES 99T
ASSEMBLY INSTRUCTIONS
99T Low pressure
3/8" Brass
99T Low pressure
1/2" Brass
99T Low pressure
1/2" Plastic
T Low pressure
2. Inlet installation
1. Height se ing
A CB
A
INLET VALVES 99T
3. Water level adjustement
B
2 cm min.
Adjust water level with
the grey adjustable screw ;
screw to increase water level,
unscrew to decrease it.
4. Maintenance
Ref. : 50 7189 01A
a cb
a
c
b
34 9513 07
WARNINGS:
• An approved single check valve or some other no less
eff ective backfl ow prevention device shall be fi tted at
the point of connection(s) between the supply and the fi tting.
• Do not over tight in any case.
• Do not use any sealing paste and/or compound in any case
SIAMP UK will be not responsible in case these warnings are
not respected.
Siamp Ltd / Unit C2 / Meadowbank Business Park
Tweedale Way / Hollinwood / Oldham / Greater Manchester / OL9 8EH
Telephone : 0161 681 2120 / Fax : 0161 681 2130 / aftersales@siamp.co.uk
/