DOGIPOT® TELESCOPING POST (ITEM 1301-P)
800.364.7681 www.DOGIPOT.com
SPECIFICATION, INSTALLATION AND OPERATION SHEET
DOGIPOT® PET STATION (ITEM #1003-L)
Y0UR ALUMINUM DOGIPOT® PET STATION INCLUDES:
• AluminumDOGIPOT®PetSign,withmountinghardware(two(2)2¼”X¼”tapbolts,washersandlocknuts)
• AluminumDOGIPOT®JUNIORBagDispenser(ITEM#1002-2),withmountinghardware(two(2)2½”X¼”bolts,
washersandlocknuts)
• Two(2)keysforDispenserlockingfrontaccesspanel
• Two(2)rollsofDOGIPOT®SmartLitterPickUpBags™(ITEM#1402)(200countperroll),installed
inDOGIPOT®JUNIORBagDispenser
• 10GallonSteelTrashReceptacle(ITEM#1206-L)withattachablelidandtrashlinerbagretainerbands,with
mountinghardware(one(1)2½”x¼”and(1)2¾”x¼”bolts,washersandlocknuts)
• One(1)boxDOGIPOT®SmartLinerTrashBags™(ITEM#1404)(50count)
SEPARATE SHIPPING BOX
• 2”x2” x4’-8’GalvanizedSteelTelescopicMountingPost,withinstallationhardware(two(2)carriagebolts
(2½”x5/16”),washersandlocknuts)
PLEASE CHECK THE ABOVE INVENTORY AND CALL YOUR DISTRIBUTOR IF ANY PARTS ARE MISSING.
INSTALLATION AND OPERATION INSTRUCTIONS
1. Select a good visible spot in your community or park where you want to install the Aluminum DOGIPOT® Pet
Station.
2.Priortoinstallation,removethe1¾”x1¾”x4’portionofthemountingpostfromthe2”x2”x4’portionofthe
mountingpostbeforecementing. Insert the larger portion of the mounting post (2” x 2” x 4’) approximately 14”
into an 18” deep by 8” diameter hole filled with a 40 lb. bag of “ready to use” concrete mix. Tostabilizethepostwhilecementing,placearod,
boltorotherdevicethroughthetwobottomholes,priortoinsertingintothegroundandcementing.Levelthepostinastraightverticalposition
andletconcretedryforatleast12hours.
3.Aftertheconcreteisdry,insertthesmallerportionofthepost(1¾”x1¾”x4’)intothelargercementedportionofthepost(2’x2’x4’)untilthe
therst4holesarelinedupbetweenthetwoposts.Usetwo(2)carriagebolts,washersandlocknutstoxthetelescopicpostinposition.,theupper
boltinthetopoverlappinghole,pointingfromrighttoleftandthelowerboltinthebottomoverlappinghole,pointingfromfronttoback.Thetotal
heightabovegroundwithbothpostpartsshouldnowbeapproximately6”6”.
4.StartbyinstallingtheDOGIPOT®PetSignontopofthe1¾”post,withtheupperholematchingthemostupperholeinthesquarepostusing
theenclosed2¼”bolts,washersandlocknuts.ContinueinstallingtheAluminumDOGIPOT®JUNIORBagDispenseraccordingtothemounting
instructionenclosedwiththeDispenser,ensuringthatheupperedgeoftheDispenserisapproximately1” belowtheloweredgeoftheDOGIPOT®
PetSign.
5.InstalltheSteelDOGIPOT®TrashReceptaclethroughthepre-drilledtopovalholesinthebackwallofthereceptacleandthroughthesquarepost
withtheremainingbolts,washersandlocknuts,usingthe2¾boltontopandthe2½boltbelow.The upper edge of the trash receptacle must be
approximately 12½” below the lower end of your Aluminum DOGIPOT® JUNIOR Bag Dispenser so that the lid may completely open.The
upperbackwallofthetrashreceptacleissupposedtotouchtheheadofthelowerpostcarriagebolt,whichcreatessomespacebetweenthepost
andthereceptacle,allowingthereceptaclelidtoopenfromlefttoright,withouttouchingthepost.
6.InsertoneoftheenclosedDOGIPOT®SmartLinerTrashBags™intothetrashreceptacle,foldingitovertheinteriorretainerbands.Aswithany
powdercoatedsteelproductconstantlyexposedtotheelements,properinstallationandgeneralmaintenancewillhelppreventandminimize
corrosionandexpandthelifeofthesteeltrashreceptacle(canbeupgradedtoaluminium(ITEM#1206A-L)foranadditionalcharge).DOGIPOT®
offersProductMaintenancePainttohelpcoveranypaintchipswhichmayoccurinthepowdercoatingduringthelifeoftheproduct.
7.ENJOY WATCHING PET OWNERS PICK UP AFTER THEIR DOGS!