greenwork pro 2019902 18 Inch 80 Volt Lithium Ion Cordless Chainsaw User guide

  • Hello! I have reviewed the user manual for the Chainsaw 80V. This document provides a detailed guide on how to safely assemble, operate and maintain your chainsaw. I'm ready to answer any questions you might have about the installation, operation or maintenance of the device. Feel free to ask!
  • What should I do before assembling the bar and chain?
    Is there a specific direction for chain assembly?
    What basic operations are covered in the manual?
80V CHAINSAW
Depending on the model purchased, packaging will contain
different accessories and parts.
Refer to the package for more details.
KNOW YOUR MACHINE 1
Add oil
INSTALLATION 2
Assemble the bar and chain
3
6
45
Install the battery pack
1. Scabbard
2. Chain brake
3. Front handle
4. Lock out button
5. Trigger
6. Oil cap
7. Oil window
8. Bucking spikes
9. Chain
10. Guide bar
11. Wrench
12. Rear handle
13. Chain tension screw
14. Chain cover
15. Chain cover nuts
Ensure the chain is put on in the correct direction, do not
assemble with the cutters backwards.
1
1
2
2
3
2
4
5
1
7 6
8
10 9
11
14 13
15
12
P0804564-00 Rev B
Canada
www.greenworkstools.ca
USA
www.greenworkstools.com
Europe
www.greenworkstools.eu
Fell a tree Limb a tree Buck a logStart the machine
Operate the chain brake
OPERATION 89
MAINTENANCE 11
Adjust the chain tension Sharpen the cutters
12 13 14
10
7
Guide bar maintenance
Remove burr from the edges.
Right Hand
Cutters
Left Hand
Cutters
1
2
Felling direction
Danger zone
Danger zone
Escape route
Escape route
Direction of fall
Notch
2’’(50mm)
2’’(50mm)
Hinge
Felling back cut
Loosen the chain cover nuts slightly.
1
2
1
2
/