Schweigen UM-12UMS Owner's manual

Brand: Schweigen

Model: UM-12UMS

Type: Owner's manual

The Schweigen UM-12UMS rangehood is designed to efficiently remove cooking fumes, smoke, and odors from your kitchen. It features a powerful motor with 5-speed settings to suit different cooking needs, from simmering to heavy frying. The rangehood also includes baffle filters that capture grease and other particles, keeping your kitchen air clean and fresh. With its sleek design and easy-to-use touch control panel, the UM-12UMS is a stylish and functional addition to any modern kitchen.

www.schweigen.com.au

RANGEHOOD & INSTALLATION GUIDE

UM-12UMS

Revision V7 02/08/2022

Page 2

Index

1. Welcome 3

Your State Regulatory Authority 3

2. Important Safety Information 4

Before Installation 5

Product Use 6

Electrical Cord 6

3. Description 7

Rangehood 7

Cutout Size 7

4. Operation 8

Push Button Control Panel 8

Speed Control 8

5. Cleaning & Maintenance 9

Cleaning the Interior 9

Cleaning the Exterior 9

Filters 10

Replacing the Lights 11

6. Installation 12

Rangehood Size vs Cooktop Size 12

Overhead cabinet Rangehood Installation position 12

Mounting Instructions 13

Recommended Installation Height for Induction Cooktop 13

Mounting Points for Body 14

Installation Example 15

Ducting 16

Isodrive® Motor Setup 17

System Overview 18

7. Condensation Information 19

Cooking with Induction Cooktops 19

8. Troubleshooting 20

Troubleshooting 20

Service 21

Faulty Installation 21

9. Specications 22

Dimensions 22

Technical Specications 22

10. Disclaimer 23

Page 3

1. Welcome

Thank you for purchasing your new Schweigen rangehood.

To get the maximum output from this unit, please read through this guide before use.

The guide contains important information on the use and maintenance of the unit, as well as important

safety notes. This will ensure your personal safety and the lasting value of your rangehood.

Please always retain your proof of purchase to aid in any warranty queries.

If you are unable to locate your warranty card, one is available to download from our website

www.schweigen.com.au.

This appliance and its packaging are produced by processes that minimise waste and respect

the environment.

Please help us to continue this eort to protect the environment by using the appliance eciently

and dispose of the packaging in a responsible manner.

We trust that you will enjoy your new Schweigen rangehood.

Your State Regulatory Authority

Dierent Australian states have varying legislative requirements for the installation of rangehood

ducting. Some will insist on ducting being vented externally (i.e. not in to the ceiling cavity); others

will not. It is imperative that you check with your state building authority and/or private certier

to conrm their position.

Page 4

2. Important Safety Information

WARNING

Please read this section thoroughly before attempting to operate the appliance.

Inspect your product upon receipt. Any damage or defects MUST be reported

within 48 hours, or no claim will be recognised.

DO NOT INSTALL THIS APPLIANCE IF YOU FIND IT DAMAGED.

If this product is installed damaged, neither the supplier, nor the retailer, will be

responsible for the costs associated with the repair, replacement, removal or

re-installation of the appliances.

1. There shall be adequate ventilation in the room when the rangehood is used at the same time

as appliances burning gas or other fuels.

2. There is a re risk if cleaning is not carried out in accordance with the instructions.

3. Do not ambé under the rangehood. This will damage the rangehood and will not be covered by warranty.

4. Do not ignite burners that give o intense, uncontrolled ames beneath the rangehood.

5. Make sure that no ames emerge from the sides of pans.

6. Do not leave packaging materials (bags, corner brackets, etc.) within reach of children.

7. This appliance is not intended for use by person/s (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and/or knowledge. Unless the person has

been given supervision or instruction concerning the use of the appliance by a person responsible

for their safety. Children should be supervised to ensure that they do not play with the appliance,

it is not a toy.

8. Exhaust air must not be discharged into an existing ue that is used for exhausting fumes from

appliances burning gas or other fuels.

9. Air exhaust must be installed in accordance with local laws. Regulations concerning the discharge

of air have to be fullled.

10. Accessible parts may become hot when used with cooking appliances.

11. Before performing any cleaning or maintenance operation, disconnect the rangehood from

the mains using the respective mains or sector switch or by unplugging it.

12. Do not use the rangehood without the grease lters.

13. Keep the grease lters clean and respect the recommended cleaning frequencies.

14. Turn the rangehood motor on before starting to cook.

15. Turn the rangehood motor o about 10-15 minutes after you nish cooking.

16. It is forbidden to use the rangehood as an aspirator.

17. Never cook foodstu directly over the ame or have the gas burners on under the rangehood

without using cookware.

Page 5

2. Important Safety Information

Before Installation

1. We recommend this appliance be installed or repaired by a experienced Home Appliances technician.

2. Please see our website www.schweigen.com.au for experienced installers.

3. It is dangerous to modify any part of this appliance. Modication of any kind, will immediately void the

warranty.

4. The manufacturer declines all responsibility in case of failure to adopt proper safety measures.

5. Ensure that the location in which this appliance is installed, has good and permanent ventilation.

6. Please consult local laws and regulations and install in accordance.

7. Use an electrical connector with earth that is correct for your location.

8. Check that the voltage in your area corresponds to the appliance as indicated on the rating label.

9. This appliance must be connected to an electricity supply with a ground connection.

10. Check that the installation and electrical connections are made by a qualied technician and that the

indicated instructions and local regulations in force are met, using materials that are compliant with

the applicable legislation.

11. The company will not be responsible for installations executed by non-qualied sta and

installations that fail to heed the applicable legislation on electrical safety (with regard to both

modes and materials).

12. The electrical technical data can be found inside the rangehood, after removing the grease lters.

13. The exible power cable supplied is already connected internally and emerges from the rangehood

near the air outlet tube.

14. Before installing the electrical connections, you should:

–Verify that the indicated electrical data coincide with the voltage values and frequency

of the electrical circuit in the house where the rangehood is to be installed;

–Check that the premises has electrical protection against short circuits and electrocution,

pursuant to the applicable legislation;

–Always switch o the current using the double-pole switch before maintenance and turn

the power on again for normal use only when the operation has been completed.

Page 6

2. Important Safety Information

Product Use

This product is designed for household use and should not be used for commercial applications.

After use, always ensure that all controls are in the “OFF” position.

When frying with a gas ame, take particular care not to allow the oil or grease in the pan to catch

re. (Flambé)

Electrical Cord

Ensure the supply cord is not exposed to heat, chemicals or sharp objects. If the supply cord is damaged,

it must be replaced by the manufacturer.

Page 7

3. Description

Rangehood

1. Socket lead for Isodrive® motor

2. Main Power Cord

3. Single 200mm outlet

4. Reducer (for Isodrive® 650 only)

5. Baes

6. Lights

NOTE: Filter and light quantity may vary from

model to model.

Important

Electronics MUST be accessible for service and/or maintenance once installed, failure to

do so, will result in any charges involved with accessing the part (removal of cabinetry etc.)

being forwarded to the customer.

1166mm approx.

266mm approx.

Dimensions may be subject to change.

Cutout Size

Use this as a guide only when designing your cabinet. We advise you to take the rangehood

to your cabinet maker so they can tailor the cabinet to t correctly.

Page 8

4. Operation

TOUCH BUTTON CONTROL PANEL

Remote control sensor

(applicable models only)

Turn light on/off

Fan speed setting

Turn rangehood on/off

USING THE ON BUTTON

The first time touch the on button, you turn the rangehood on, the second time when you touch

the on button it goes to 10min timer, the third time you touch it, the rangehood is turned off.

SPEED CONTROL

This undermount is equipped with a 5 speed touch control.

Speed control usage suggestions:

• Low speed for simmering.

• Medium speed for light cooking.

• High speed for heavy frying/cooking.

Page 9

5. Cleaning & Maintenance

Cleaning the Interior

Clean the interior of the rangehood with a damp cloth and a neutral detergent or denatured alcohol.

NOTE: Do not use denatured alcohol on the exterior of the rangehood. Do not clean the electric parts or

the motor with liquids or solvents

Cleaning the Exterior

We recommended using a soft cloth, water and a liquid soap, rinsing it well and then drying it thoroughly.

For better results, you can use high quality cleaning and protection products (e.g. Steel Kleen) to clean

your rangehood.

• The recommended detergent is a solution of water and a neutral

liquid soap.

• It is very important for the liquid soap to not contain granules

that could scratch the surface.

• First apply the solution to a soft cloth and then rub the cloth

over the rangehood. It is important to follow the direction of the

stained surface with the cloth (refer to gure on left).

• Do not pour any liquid directly on to the rangehood.

• The cloth must have no buttons, zips or fasteners that could

scratch the surface.

• It is strictly forbidden to use chemical solvents, aggressive,

grainy or abrasive products, naphtha, alcohol or similar products

that could damage the surface of the rangehood.

• The manufacturer will not be held responsible for functional or

aesthetic damage caused by cleaning with products which are

not suitable or using inadequate cleaning methods.

Warning

Always switch o and disconnect power before cleaning.

Fan speed setting

Turn rangehood on/off

Page 10

5. Cleaning & Maintenance

To remove the lter lift up the lever and pull

towards you. Then lower the lter to remove

from the cavity. To replace, perform the same

operation but in reverse.

Filters

For this appliance to function eectively, regular maintenance is a must.

• The function of the lter is to absorb the grease particles given o during cooking.

• Clogged lters and heavy oil deposits restrict airow and may cause the motor to overheat

and become a re hazard.

• Filters should be cleaned every 3-6 weeks or after 40 hours of use.

• For induction cooktop, please aim to clean them at least every 10 days, depending on use.

• The lters can be washed by hand or in the dishwasher.

–Washing by hand - Immerse the lter in hot water and a suitable detergent and when clean,

rinse with plenty of hot water.

–Dishwasher - Put the lter in the dishwasher and select a short program at low temperature.

NOTE: The colour of the metal mesh lters may change after several washes. This is normal and

it is not necessary to change the lters.

Please ensure the lters are completely dry before placing them back in position

and operating the rangehood.

Warning

• If the grease lters are very dirty, the motor will extract only a small quantity of air,

which reduces its eciency;

• The grease deposits that build up on the lter are highly ammable and COULD

EASILY CATCH FIRE.

• The manufacturer is exonerated from all responsibility in the event of re due to poor

maintenance of the grease lters.

Page 11

5. Cleaning & Maintenance

Replacing the Lights

Danger

Always switch o and disconnect power before replacing the lights. Failure to do so may

cause serious injury. Please be aware that the light bulb may retain heat for a short period

of time after being switched o.

Step 2

Gently turn light bulb anti-

clockwise, pull the light bulb

down and remove it from the

light holder.

Step 3

Insert a new light bulb by lining

up the pins of the light bulb with

the larger holes inside the light

holder. Once the pins are in place,

turn clockwise to secure the light

bulb.

Step 1

Remove the lters from

the rangehood.

Page 12

6. Installation

Rangehood Size vs Cooktop Size

In addition to the size, the height of the rangehood above the cooktop is important to obtain

the best performance.

INADEQUATE

Rangehood smaller than

cooking zone

ADEQUATE

Rangehood same size as

cooking zone

OPTIMAL

Rangehood larger than

cooking zone

Overhead cabinet Rangehood Installation position

It is important to consider the benchtop and overhead cabinetry depth before installing the rangehood.

The information below is to be used as a guide only, drawings are not to scale and do not account

for all circumstances.

The cooktop is centrally installed in the benchtop in the diagrams below.

GOOD

600mm 600mm 600mm

400mm

Side View Side View

BETTER

450mm

BEST

500mm

When the overhead cabinetry is

constructed and installed deeper

than standard, ensure the rangehood

is installed as close to the front

as possible. This will increase the

rangehood extraction results as there

is a greater coverage of the cooktop

surface area.

Side View

Page 13

6. Installation

Mounting Height

It is STRONGLY RECOMMENDED that the rangehood be installed centrally over the cooktop.

This will greatly improve its performance.

Minimum height from the hob top surface to the underside face of the rangehood:

• 600mm electric cooktop

• 650mm gas cooktop

Any installation above 800mm will compromise the extraction performance.

Note: If the instructions for the gas cooktop specify a greater distance, this must be taken into account.

Recommended Installation Height for Induction Cooktop

To help avoid condensation, particular to cooking with an induction cooktop, Schweigen recommends

a height between 700-750mm. Refer to page 19 for further information.

*IMPORTANT: If the user decides to install the

rangehood at a distance of less than minimum

height above the cooking surface, Schweigen

declines responsibility for damages suered

by the rangehood due to excess heat or damage

to objects, people and others caused directly

or indirectly by a malfunction, breakage or re.

Measurements are from the top of the trivets

to the lowest part of the rangehood, including

the button controls.

* Important: In addition to the information in this manual,

please check all relevant state requirememnts for minimum–

maximum heights, as well as regulations regarding the

expelling of air. Schweigen is not liable if your rangehood is

not installed in accordance with these legal requirements.

Page 14

6. Installation

FRONT VIEWSIDE VIEW

Mounting Points for Body

The diagrams below are a guide for all mounting points.

DANGER

Always switch o and disconnect the power supply before installing the rangehood.

Failure to do so may cause serious injury.

WARNING

Please remove lters before installation. Failure to do so may damage the clips.

Page 15

6. Installation

NOTE

Remove all plastic protection on the rangehood and lters before use.

Installation Example

FRONT VIEW

TOP VIEW

BOTTOM VIEW

SIDE VIEW SIDE VIEW

FRONT VIEW

TOP VIEW

BOTTOM VIEW

SIDE VIEW SIDE VIEW

FRONT VIEW

TOP VIEW

BOTTOM VIEW

SIDE VIEW SIDE VIEW

FRONT VIEW

TOP VIEW

BOTTOM VIEW

SIDE VIEW SIDE VIEW

Mounting frame

Step 2

Secure mounting frame to inside of cabinet.

Step 3

Secure the undermount into cavity using screws.

All screws are installed internally into the

mounting frame.

Step 1

Insert mounting frame into cabinet. The support

will only be needed in certain circumstances.

NOTE: The mounting frame is not included. The

requirement of a mounting frame is dependent

on the type and location of installation. Please

contact your installer for more information.

Socket lead

(Isodrive®)

Plug lead

(Main power)

Page 16

6. Installation

Ducting

Please DO NOT crush or kink the ducting.

1. Crushed or kinked ducting creates

sharp corners that creates turbulence.

This reduces the size and eciency

of the ducting, lowers extraction and

may cause excessive noise.

2. Sweeping curves and taut ducting

reduces resistance and turbulence.

The airow and extraction will be

more ecient and stronger.

Page 17

6. Installation

Isodrive® Motor Setup

NOTE

Please refer to the Isodrive® motor installation guide for more details

on ducting and Isodrive® motor installation.

_n_. _LH Section_

Page 18

6. Installation

DANGER

All electrical wiring from the motor to the rangehood should be kept inside the roof space.

NOTE

The Isodrive® motor system does not include the roof seal kit, cable ties or the

support straps.

NOTE

The general power outlet for the rangehood should be located in an easy to access area.

System Overview

1. Isodrive® Motor

2. Roof Seal Kit (Dektite) (Not supplied)*

3. Support Straps (Not supplied)*

4. Attach Duct to Bell-Mouth Adaptor using ring

clamp. Please DO NOT rip the ducting.

5. Isodrive® Motor Power Lead (Plug)

6. Rangehood to Isodrive® Motor Lead

(Socket)

7. Main Power Lead (Plug, 10 Amp)

8. Ducting must be pulled taut.

DO NOT crush or kink the ducting.

9. Connect ducting to the outlet on rangehood

using ring clamp.

Please DO NOT rip the ducting.

Pictures are for illustrative purposes only, not to scale.

_n_. _RH Section_

Page 19

7. Condensation Information

Cooking with Induction Cooktops

Cooking with an induction or similar cooktop, may produce condensation on the rangehood.

Unlike basic electric or gas cooking, induction cooktops heat food and liquid instantly, which in turn,

produces vapours rapidly. Because of this rapid process, the rangehood lters do not have enough

time to warm, which increases the chance of condensation forming.

There are many variables that may contribute to condensation forming, some of which include but

are not limited to:

• Variance in climate – geographical location

• Position of your home & kitchen – morning/afternoon sun

• Installation distance from cooktop to the rangehood

• Speed of food & liquid heating

• Filter size – larger canopy preferred

• Quality of pots or cookware you are using – high quality recommended

How to reduce the possibility of condensation forming:

• Ensure the rangehood is installed by a qualied professional, carefully following the installation guide

• Turn on the rangehood 5-10 minutes prior to cooking, and leave on for 10-15 minutes after cooking;

this helps clear remaining vapours from the ue.

• Start the cooking process at a low-to-medium setting and allow time for the rangehood to warm up.

• Clean lters regularly.

• Ensure constant airow in the cooking zone; this helps optimise the rate of extraction.

• Follow all induction cooktop manufacturer advice.

For further advice, tips or information regarding cooking with induction, please contact your induction

cooktop manufacturer.

_n_. _LH Section_

Page 20

8. Troubleshooting

Before you contact the technical service department, make sure that the product is plugged in

and power is supplied.

• Do not take any action that will damage the product.

Check electric connection. Voltage of the electric

network should be between 220 - 240V, rangehood

should be connected to grounded plug and turned on.

Check motor switch. Please ensure that there is

power to the rangehood and the rangehood is

switched on.

Check lamp switch. Lamp switch should be at on

position.

Check lters. The lters should be washed regularly,

see lter cleaning.

LEDs should be rmly in position.

Check LEDs.

Make sure they are not broken or faulty.

Please make sure there is no obstruction in ducting or

with the back draft ns.

Check the outlet, make sure it is not blocked and you

have the correct diameter ducting installed.

Check Isodrive® installation manual, make sure the

ducting is installed correctly, e.g. Length of ducting

used, keep the ducting taut.

Check the ducting has not come o the rangehood

outlet or has been eaten through by rodents.

Rangehood does not work X X

Light does not work X X X X

Rangehood air exaction is weak X X X X

Rangehood does not direct air out

(through chimney) X X

Loud noise from the rangehood X X

IMPORTANT

Never attempt to repair this appliance by yourself. Always refer to a qualied Service

Technician.

Page is loading ...

Schweigen UM-12UMS Owner's manual

Schweigen UM-12UMS Owner's manual

Schweigen UM-12UMS Owner's manual

Related papers

Other documents