Playcraft Willow Bend Pool Table Owner's manual

Type
Owner's manual
Willow Bend
ASSEMBLY INSTRUCTIONS
assistance.
1) Your table is designed for use indoors in a climate controled environment only.
Damage can occur if the table is exposed to water, dampness, high humidity,
freezing temperatures, etc.
2) Professional assembly is strongly recommended. This assembly manual is intended to
guide an experienced slate pool table installer with the assembly process of this
for which the process is the same regardless of the cabinet type.
2) The pool table cabinet and slate are extremely heavy. Two or more people are
required for assembly.
or serious injury.
5) Only use the table for its intended purpose.
6) Damaged or worn parts may be dangerous for users and the integrity of the table.
will void the warranty.
8) Check all screws, bolts, etc. on a regular basis to ensure that they are in good working
as required with owning a slate pool table
技术要求:
Willow Bend
altering
PART LIST
NO. IMAGE DESCRIPTION SPECIFICATION QTY UNIT
H1
BOTTOM
SUPPORT BEAM 1736*120*80 1 PCS
ASSEMBLY
POSITION FRAME
H2
HARDWARE 180*85*85 2 PCS
ASSEMBLY
POSITION FRAME
H3
HARDWARE 170*100*120 2 PCS
ASSEMBLY
POSITION FRAME
H4
LEG 1100*190*660 2 PCS
ASSEMBLY
POSITION FRAME
H5
CENTRE
SUPPORT BEAM 570*80*80 2 PCS
ASSEMBLY
POSITION FRAME
H6
TOP SUPPORT
BEAM 1766*100*50 1 PCS
ASSEMBLY
POSITION FRAME
H7
SHORT BEAM 1173*180*40 2 PCS
ASSEMBLY
POSITION GRADE A BEAM
H8
LONG BEAM 1936*180*40 2 PCS
ASSEMBLY
POSITION
GRADE A BEAM
H9
MIDDLE BEAM 893*120*40 2 PCS
ASSEMBLY
POSITION GRADE A BEAM
H10
SIDE SLATE1 805*1295*40 1
ASSEMBLY
POSITION TOP RAIL
H11
MIDDLE SLATE 805*1295*40 1 PCS
ASSEMBLY
POSITION TOP RAIL
H12
SIDE SLATE 2 805*1295*40 1
ASSEMBLY
POSITION TOP RAIL
H13
CLOTH 1
ASSEMBLY
POSITION TOP RAIL
H14
1, 4# TOP RAIL 1083*164*43 2 PCS
ASSEMBLY
POSITION TOP RAIL
H15
2,5# TOP RAIL 1111*164*43 2 PCS
ASSEMBLY
POSITION TOP RAIL
H16
3,6# TOP RAIL 1101*164*43 2 PCS
ASSEMBLY
POSITION TOP RAIL
H17
CORNER 190*190*43 4 PCS
ASSEMBLY
POSITION TOP RAIL
H18
SHORT APRON 1377*140*50 2 PCS
ASSEMBLY
POSITION TOP RAIL
H19
HARDWARE 135*70*70 4 PCS
ASSEMBLY
POSITION TOP RAIL
H20
LONG APRON 2496*140*50 2 PCS
ASSEMBLY
POSITION TOP RAIL
HARDWARE LIST
NO. IMAGE DESCRIPTION SPECIFICATION QTY UNIT
A
HEXAGON BOLT ø10*80 4 PCS
2PCS FOR BOTTOM SUPPORT BEAM AND
HARDWARE, 2PCS FOR CENTRE SUPPORT BEAM
AND HARDWARE
ASSEMBLY
POSITION
B
FLAT WASHER M10*30*2 32 PCS
16PCS FOR APRON, 12PCS FOR BOTTOM SUPPORT
BEAM , 4PCS FOR CENTRE SUPPORT BEAM
ASSEMBLY
POSITION
C
BOLT NUT M10 28 PCS
16PCS FOR APRON, 10PCS FOR BOTTOM SUPPORT
BEAM , 2PCS FORCENTRE BEAM
ASSEMBLY
POSITION
D
HEXAGON BOLT ø10*100 8 PCS
FOR BOTTOM SUPPORT BEAM AND CENTRE
SUPPORT BEAM
ASSEMBLY
POSITION
E
HEXAGON BOLT ø10*25 24 PCS
16 PCS FOR APRON AND HARDWARE, 8PCS FOR LEG
AND HARDWARE
ASSEMBLY
POSITION
F
HEXAGON BOLT ø10*60 20 PCS
18PCS FOR TOR RAIL AND SLATE,2 PCS FOR TOP RAIL
AND TOP SUPPORT BEAM
ASSEMBLY
POSITION
G
FLAT WASHER M10*30*2 10 PCS
2PCS FOR TOP SUPPORT BEAM AND CENTRE
SUPPORT BEAM,8PCS FOR TABLE FRAME AND LEG
ASSEMBLY
POSITION
H
SCREW 4.2*50 12 PCS
4PCS FOR TOP SUPPORT BEAMN AND CENTRE
SUPPORT BEAM,8PCS FOR TABLE FRAME AND LEG PCS
I
HEXAGON BOLT ø12*180 4 PCS
USED TO FIX THE CROSS BEAM ASSEMBLY
POSITION
J
FLAT WASHER M12*30*2 4 PCS
USED TO FIX THE CROSS BEAM ASSEMBLY
POSITION
K
ACRON NUT M12 4 PCS
USED TO FIX THE CROSS BEAM ASSEMBLY
POSITION
L
HEXAGON BOLT ø10*70 8 PCS
USED TO FIX THE GRADE A BEAM AND LEGS ASSEMBLY
POSITION
M
SLATE LEVELLER
ø10*100 12 PCS
N
ø10*50 4 PCS
USED TO ADJUST AND LEVEL THE SLATE ASSEMBLY
POSITION
O
FLAT HEAD
SCREW 6*60 12 PCS
USED TO FIX THE SLATE AND FRAME ASSEMBLY
POSITION
P
WOODEN PLUG ø10*50 2 PCS
USED TOCONNECT #2 AND #5 TOP RAIL ,#3 AND #6
TOP RAIL
ASSEMBLY
POSITION
Q
BARREL NUT ø8*30 8 PCS
USED TO FIX THE TOP RAIL AND CORNER ASSEMBLY
POSITION
R
SE
MICIRCLE WASH
ER
M8 8 PCS
USED TO FIX THE TOP RAIL AND CORNER ASSEMBLY
POSITION
S
FLAT WASHER M8 20 PCS
USED TO FIX THE TOP RAIL AND CORNER ASSEMBLY
POSITION
T
HEXAGON BOLT ø8*80 8 PCS
USED TO FIX THE TOP RAIL AND CORNER ASSEMBLY
POSITION
U
HEXAGON BOLT ø8*35 12 PCS
USED TO FIX THE TOP RAIL AND APRON ASSEMBLY
POSITION
加工工艺: 1此款球台表面质量一定
要高注意选料
2不用贴薄板与拉丝松木
较软注意轻拿轻放
V
DOME WASHER M10*30*5 18 PCS
USED TO FIX THE TOP RAIL AND SLATE
W
SIDE POCKET 4 PCS
ASSEMBLY
POSITION
X
MIDDLE POCKET 2 PCS
ASSEMBLY
POSITION
Y
SCREW 4.2*16 12 PCS
USED TO FIX THE LEATHER POCKET ASSEMBLY
POSITION
李克禄
沉孔
8FT-PCT04乡村美式球台
3修边机定宽预留余量5MM
4千斤顶上拼脚(注意用F夹固定好防
止跑位)
5平刨两面压刨两面定厚定宽
6加工4-12的沉孔并埋内外牙螺母
Customer Service
Global Merchants, Inc.
12 Lunar Drive
Woodbridge, CT 06525
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Playcraft Willow Bend Pool Table Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI